Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 200

The DOI matches its Crossref record.

HapticWalker---a novel haptic foot device

Schmidt, Henning, Hesse, Stefan, Bernhardt, Rolf, Krüger, Jörg · 2005 · ACM Transactions on Applied Perception

Abstract

This paper presents a new haptic locomotion interface, which comprises two programmable foot platforms with permanent foot machine contact. It is designed as a scalable and modular system with unit-by-unit extensibility offering up to six plus one degrees of freedom (DOF) per foot. The basic setup comprises three DOF per foot in the sagittal plane.The machine is based on a rigid hybrid parallel-serial robot kinematics structure. It is equipped with electrical direct drive motors, enabling highly dynamic footplate motions. For contact force measurement, six DOF force/torque sensors are mounted under each foot platform. The system was developed for major application in gait rehabilitation, hence great importance was attached to the incorporation of maximum passive and active security measures for machine users and medical operating personnel.The simulator is able to perform walking trajectories with speeds of up to 5 km/h and 120 steps/min. The system is able to simulate not only slow and “smooth” trajectories like walking on an even floor, up/down staircases, but also foot motions like walking on rough ground or even stumbling or sliding, which require high system dynamics.The machine is controlled by a self-developed full-featured robot control whose soft and hardware is based on up-to-date industrial standards and interfaces. The robot control software is based on RTLinux and runs on an industrial PC. The real-time motion generator includes a newly developed Fourier-based algorithm for the interpolation of natural cyclic walking trajectories. For the implementation of asynchronous events (e.g., sliding, stumbling), the controller comprises especially developed algorithms for automatic motion override adaptation. Different modes of haptic behavior needed for gait rehabilitation, ranging from full foot support during swing phase to completely passive behavior, are currently under development.Intuitive and safe machine operation by nontechnical personnel such as clinicians and physiotherapists is achieved via a separate Windows-based graphical user interface software comprising different window areas for machine programming and operation, real-time off-line simulation and online data visualization in two and three dimensions has been developed as well.A working prototype of the system has been built and tested successfully, including all soft and hardware components. Although the machine has been designed and built for major application in gait rehabilitation, its range of applicability is not limited to this area. It could be integrated into any setup requiring a highly dynamic haptic foot interface and permanent foot machine contact if needed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1145/1060581.1060589

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 200

Metadata

Authors
Schmidt, H., Hesse, S., Bernhardt, R., & Krüger, J.
Venue
ACM Transactions on Applied Perception
Published
2005-04
Volume
2
Issue
2
Pages
166-180
ISSN
  • 1544-3558 (ISSN-L)
  • 1544-3965
OpenAlex
W1995383159
Cited by
200
References
0
FWCI
6.99
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: HapticWalker---a novel haptic foot device. https://app.cochat.ai/papers/10.1145/1060581.1060589
The paper
Schmidt, H., Hesse, S., Bernhardt, R., & Krüger, J. (2005). HapticWalker---a novel haptic foot device. ACM Transactions on Applied Perception. https://doi.org/10.1145/1060581.1060589

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.