The DOI matches its Crossref record.
Techniques for Design and Implementation of Secure Reconfigurable PUFs
Abstract
Physically unclonable functions (PUFs) provide a basis for many security and digital rights management protocols. PUF-based security approaches have numerous comparative strengths with respect to traditional cryptography-based techniques, including resilience against physical and side channel attacks and suitability for lightweight protocols. However, classical delay-based PUF structures have a number of drawbacks including susceptibility to guessing, reverse engineering, and emulation attacks, as well as sensitivity to operational and environmental variations. To address these limitations, we have developed a new set of techniques for FPGA-based PUF design and implementation. We demonstrate how reconfigurability can be exploited to eliminate the stated PUF limitations. We also show how FPGA-based PUFs can be used for privacy protection. Furthermore, reconfigurability enables the introduction of new techniques for PUF testing. The effectiveness of all the proposed techniques is validated using extensive implementations, simulations, and statistical analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Survey of Hardware Trojan Taxonomy and Detection
Tehranipoor, M., & Koushanfar, F. (2010) · IEEE Design & Test of Computers · doi:10.1109/mdt.2010.7 · Cited by 1,424
Self-citationPhysical Unclonable Functions and Applications: A Tutorial
Herder, C., Yu, M.-D., Koushanfar, F., & Devadas, S. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2320516 · Cited by 1,357
Self-citationPUF Modeling Attacks on Simulated and Silicon Data
Ruhrmair, U., Solter, J., Sehnke, F., Xu, X., Mahmoud, A., Stoyanova, V., Dror, G., Schmidhuber, J., Burleson, W., & Devadas, S. (2013) · IEEE Transactions on Information Forensics and Security · doi:10.1109/tifs.2013.2279798 · Cited by 637
Gao, Y., Al-Sarawi, S. F., & Abbott, D. (2020) · Nature Electronics · doi:10.1038/s41928-020-0372-5 · Cited by 613
Physically Unclonable Functions: A Study on the State of the Art and Future Research Directions
Maes, R., & Verbauwhede, I. (2010) · Information Security and Cryptography · doi:10.1007/978-3-642-14452-3_1 · Cited by 469
Metadata
- Authors
- Majzoobi, M., Koushanfar, F., & Potkonjak, M.
- Venue
- ACM Transactions on Reconfigurable Technology and Systems
- Published
- 2009-03
- Volume
- 2
- Issue
- 1
- Pages
- 1-33
- ISSN
- 1936-7406 (ISSN-L)
- 1936-7414
- OpenAlex
- W2070196900
- Cited by
- 204
- References
- 0
- FWCI
- 23.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Techniques for Design and Implementation of Secure Reconfigurable PUFs. https://app.cochat.ai/papers/10.1145/1502781.1502786
- The paper
- Majzoobi, M., Koushanfar, F., & Potkonjak, M. (2009). Techniques for Design and Implementation of Secure Reconfigurable PUFs. ACM Transactions on Reconfigurable Technology and Systems. https://doi.org/10.1145/1502781.1502786
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.