The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Automatic reconstruction of surfaces and scalar fields from 3D scans
Open accessAbstract
We present an efficient and uniform approach for the automatic reconstruction of surfaces of CAD (computer aided design) models and scalar fields defined on them, from an unorganized collection of scanned point data.A possible application is the rapid computer model reconstruction of an existing part or prototype from a three dimensional (3D) points scan of its surface.Color, texture or some scalar material property of the physical part, define natural scalar fields over the surface of the CAD model.Our reconstruction algorithm does not impose any convexity or differentiability restrictions on the surface of the original physical part or the scalar field function, except that it assumes that there is a sufficient sampling of the input point data to unambiguously reconstruct the CAD model.Compared to earlier methods our algorithm has the advantages of simplicity, efficiency and uniformity (both CAD model and scalar field reconstruction).The simplicity and efficiency of our approach is based on several novel uses of appropriate sub-structures (alpha shapes) of a three-dimensional Delaunay Triangulation, its dual the three-dimensional Voronoi diagram, and dual uses of trivariate Bernstein-Bézier forms.The boundary of the CAD model is modeled using implicit cubic Bernstein-Bézier patches, while the scalar field is reconstructed with functional cubic Bernstein-Bézier patches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computational Geometry--An Introduction.
Atallah, M. J., Preparata, F. P., & Shamos, M. I. (1986) · Mathematics of Computation · doi:10.2307/2008200 · Cited by 4,238
Surface reconstruction from unorganized points
Hoppe, H., DeRose, T., Duchamp, T., McDonald, J., & Stuetzle, W. (1992) · Proceedings of the 19th annual conference on Computer graphics and interactive techniques · doi:10.1145/133994.134011 · Cited by 2,730
Three-dimensional alpha shapes
Edelsbrunner, H., & Mücke, E. P. (1994) · ACM Transactions on Graphics · doi:10.1145/174462.156635 · Cited by 2,488
Curves and Surfaces for Computer Aided Geometric Design--A Practical Guide.
Bajaj, C., & Farin, G. (1990) · Mathematics of Computation · doi:10.2307/2008458 · Cited by 2,123
Self-citationCurves and Surfaces for Computer-Aided Geometric Design
(1993) · Elsevier eBooks · doi:10.1016/c2009-0-22351-8 · Cited by 2,037
Algorithms in Combinatorial Geometry.
Goodman, J. E., & Edelsbrunner, H. (1989) · The American Mathematical Monthly · doi:10.2307/2325168 · Cited by 1,788
On the shape of a set of points in the plane
Edelsbrunner, H., Kirkpatrick, D., & Seidel, R. (1983) · IEEE Transactions on Information Theory · doi:10.1109/tit.1983.1056714 · Cited by 1,634
Algorithms in Combinatorial Geometry
Edelsbrunner, H. (1987) · Springer eBooks · doi:10.1007/978-3-642-61568-9 · Cited by 1,534
Zippered polygon meshes from range images
Turk, G., & Levoy, M. (1994) · Proceedings of the 21st annual conference on Computer graphics and interactive techniques - SIGGRAPH '94 · doi:10.1145/192161.192241 · Cited by 1,326
Hoppe, H., DeRose, T., Duchamp, T., McDonald, J., & Stuetzle, W. (1993) · Proceedings of the 20th annual conference on Computer graphics and interactive techniques · doi:10.1145/166117.166119 · Cited by 1,303
Cited by
A volumetric method for building complex models from range images
Curless, B., & Levoy, M. (1996) · Proceedings of the 23rd annual conference on Computer graphics and interactive techniques · doi:10.1145/237170.237269 · Cited by 3,124
Screened poisson surface reconstruction
Kazhdan, M., & Hoppe, H. (2013) · ACM Transactions on Graphics · doi:10.1145/2487228.2487237 · Cited by 2,231
The ball-pivoting algorithm for surface reconstruction
Bernardini, F., Mittleman, J., Rushmeier, H., Silva, C., & Taubin, G. (1999) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/2945.817351 · Cited by 1,495
Self-citationComputing and rendering point set surfaces
Alexa, M., Behr, J., Cohen-Or, D., Fleishman, S., Levin, D., & Silva, C. T. (2003) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2003.1175093 · Cited by 1,089
A new Voronoi-based surface reconstruction algorithm
Amenta, N., Bern, M., & Kamvysselis, M. (1998) · Proceedings of the 25th annual conference on Computer graphics and interactive techniques - SIGGRAPH '98 · doi:10.1145/280814.280947 · Cited by 901
Metadata
- Authors
- Bajaj, C. L., Bernardini, F., & Xu, G.
- Venue
- Proceedings of the 22nd annual conference on Computer graphics and interactive techniques - SIGGRAPH '95
- Publisher
- ACM Press
- Published
- 1995
- Pages
- 109-118
- OpenAlex
- W2073371710
- Cited by
- 292
- References
- 21
- FWCI
- 20.99
- Type
- conference paper
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Automatic reconstruction of surfaces and scalar fields from 3D scans. https://app.cochat.ai/papers/10.1145/218380.218424
- The paper
- Bajaj, C. L., Bernardini, F., & Xu, G. (1995). Automatic reconstruction of surfaces and scalar fields from 3D scans. Proceedings of the 22nd annual conference on Computer graphics and interactive techniques - SIGGRAPH '95. https://doi.org/10.1145/218380.218424
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.