The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Printed optics: 3D printing of embedded optical elements for interactive devices
Abstract
We present an approach to 3D printing custom optical elements for interactive devices labelled Printed Optics. Printed Optics enable sensing, display, and illumination elements to be directly embedded in the casing or mechanical structure of an interactive device. Using these elements, unique display surfaces, novel illumination techniques, custom optical sensors, and embedded optoelectronic components can be digitally fabricated for rapid, high fidelity, highly customized interactive devices. Printed Optics is part of our long term vision for interactive devices that are 3D printed in their entirety. In this paper we explore the possibilities for this vision afforded by fabrication of custom optical elements using today's 3D printing technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hansmann, U., Stöber, T., Merk, L., & Nicklous, M. S. (2003) · Cited by 1,168
Low-cost multi-touch sensing through frustrated total internal reflection
Han, J. Y. (2005) · Proceedings of the 18th annual ACM symposium on User interface software and technology · doi:10.1145/1095034.1095054 · Cited by 1,044
SideSight: multi-"touch" interaction around small devices
Butler, A., Izadi, S., & Hodges, S. (2008) · Proceedings of the 21st annual ACM symposium on User interface software and technology · doi:10.1145/1449715.1449746 · Cited by 269
SLAP widgets: bridging the gap between virtual and physical controls on tabletops
Weiss, M., Wagner, J., Jansen, Y., Jennings, R., Khoshabeh, R., Hollan, J. D., & Borchers, J. (2009) · Proceedings of the SIGCHI Conference on Human Factors in Computing Systems · doi:10.1145/1518701.1518779 · Cited by 196
Multi-user interaction using handheld projectors
Cao, X., Forlines, C., & Balakrishnan, R. (2007) · Proceedings of the 20th annual ACM symposium on User interface software and technology · doi:10.1145/1294211.1294220 · Cited by 181
Madgets: actuating widgets on interactive tabletops
Weiss, M., Schwarz, F., Jakubowski, S., & Borchers, J. (2010) · Proceedings of the 23nd annual ACM symposium on User interface software and technology · doi:10.1145/1866029.1866075 · Cited by 158
Shape deposition manufacturing of heterogeneous structures
Weiss, L. E., Merz, R., Prinz, F. B., et al. (1997) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(97)89095-4 · Cited by 148
Fabricating microgeometry for custom surface reflectance
Weyrich, T., Peers, P., Matusik, W., & Rusinkiewicz, S. M. (2009) · ACM Transactions on Graphics · doi:10.1145/1531326.1531338 · Cited by 135
Izadi, S., Hodges, S. E., Taylor, S., et al. (2008) · ACM Symposium on User Interface Software and Technology (UIST) · doi:10.1145/1449715.1449760 · Cited by 115
Baudisch, P., Becker, T., & Rudeck, F. (2010) · ACM SIGCHI Conference on Human Factors in Computing Systems (CHI) · doi:10.1145/1753326.1753500 · Cited by 107
Cited by
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
The Boom in 3D-Printed Sensor Technology
Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W. (2017) · Sensors · doi:10.3390/s17051166 · Cited by 361
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
Metadata
- Authors
- Willis, K., Brockmeyer, E., Hudson, S., & Poupyrev, I.
- Venue
- Proceedings of the 25th annual ACM symposium on User interface software and technology
- Publisher
- ACM
- Published
- 2012-10-07
- Pages
- 589-598
- OpenAlex
- W2147326417
- Cited by
- 306
- References
- 14
- FWCI
- 34.27
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Printed optics: 3D printing of embedded optical elements for interactive devices. https://app.cochat.ai/papers/10.1145/2380116.2380190
- The paper
- Willis, K., Brockmeyer, E., Hudson, S., & Poupyrev, I. (2012). Printed optics: 3D printing of embedded optical elements for interactive devices. Proceedings of the 25th annual ACM symposium on User interface software and technology. https://doi.org/10.1145/2380116.2380190
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.