Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.

Occupancy estimation using ultrasonic chirps

Shih, Oliver, Rowe, Anthony · 2015 · Proceedings of the ACM/IEEE Sixth International Conference on Cyber-Physical Systems

Abstract

Estimating the number of people within a room is important for a wide variety of applications including: HVAC load management, scheduling room allocations and guiding first responders to areas with trapped people. In this paper, we present an active sensing technique that uses changes in a room's acoustic properties to estimate the number of occupants. Frequency dependent models of reverberation and room capacity are often used when designing auditoriums and concert halls. We leverage this property by using measured changes in the ultrasonic spectrum reflected back from a wide-band transmitter to estimate occupancy. A centrally located beacon transmits an ultrasonic chirp and then records how the signal dissipates over time. By analyzing the frequency response over the chirp's bandwidth at a few known occupancy levels, we are able to extrapolate the response as the number of people in the room changes. We explore the design of an excitation signal that best senses the environment with the fewest number of training samples. Through experimentation, we show that our approach is able to capture the number of people in a wide-variety of room configurations with people counting accuracy below 10% of the maximum room capacity count with as few as two training points. Finally, we provide a simple mechanism that allows our system to recalibrate when we know the room is empty so that it can adapt dynamically over time.

Overview

Integrity signals

Registry

Crossref · 10.1145/2735960.2735969

Cites

25 of 25 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 25 references

Research works printed but not linked: 1

  1. E. Hailemariam , R. Goldstein , R. Attar , and A. Khan , " Real-time occupancy detection using decision trees with multiple sensor types," in Symposium on Simulation for Architecture and Urban Design , 2011 . E. Hailemariam, R. Goldstein, R. Attar, and A. Khan, "Real-time occupancy detection using decision trees with multiple sensor types," in Symposium on Simulation for Architecture and Urban Design, 2011.

Cited by

See all 82

Metadata

Authors
Shih, O., & Rowe, A.
Affiliations
Carnegie Mellon University (US)
Venue
Proceedings of the ACM/IEEE Sixth International Conference on Cyber-Physical Systems
Publisher
ACM
Published
2015-04-14
Pages
149-158
OpenAlex
W2023066921
Cited by
73
References
25
Citations by year
2026: 2 · 2025: 4 · 2024: 5 · 2023: 6 · 2022: 10 · 2021: 8 · 2020: 7 · 2019: 6 · 2018: 9 · 2017: 12 · 2016: 3
FWCI
9.90
Type
conference paper
Language
en
Open access
closed
Locations
ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS) (publishedVersion)
Funders
Bosch Research and Technology Center in Pittsburgh and TerraSwarm
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
  • Physical Sciences › Computer Science › Signal Processing › Speech and Audio Processing
  • Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
Keywords
occupancy estimation, active sensing, reverberation, room capacity, training sample reduction, recalibration

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Occupancy estimation using ultrasonic chirps. https://app.cochat.ai/papers/10.1145/2735960.2735969
The paper
Shih, O., & Rowe, A. (2015). Occupancy estimation using ultrasonic chirps. Proceedings of the ACM/IEEE Sixth International Conference on Cyber-Physical Systems. https://doi.org/10.1145/2735960.2735969

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.