The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Reinforced FDM: multi-axis filament alignment with controlled anisotropic strength
Open accessAbstract
The anisotropy of mechanical strength on a 3D printed model can be controlled in a multi-axis 3D printing system as materials can be accumulated along dynamically varied directions. In this paper, we present a new computational framework to generate specially designed layers and toolpaths of multi-axis 3D printing for strengthening a model by aligning filaments along the directions with large stresses. The major challenge comes from how to effectively decompose a solid into a sequence of strength-aware and collision-free working surfaces. We formulate it as a problem to compute an optimized governing field together with a selected orientation of fabrication setup. Iso-surfaces of the governing field are extracted as working surface layers for filament alignment. Supporting structures in curved layers are constructed by extrapolating the governing field to enable the fabrication of overhangs. Compared with planar-layer based Fused Deposition Modeling (FDM) technology, models fabricated by our method can withstand up to 6 . 35× loads in experimental tests.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
OBBTree: a hierarchical structure for rapid interference detection
Gottschalk, S., Lin, M. C., & Manocha, D. (1996) · Proceedings of the 23rd annual conference on Computer graphics and interactive techniques · doi:10.1145/237170.237244 · Cited by 2,081
Cited by
A Survey on Session-based Recommender Systems
Wang, S., Cao, L., Wang, Y., Sheng, Q. Z., Orgun, M. A., & Lian, D. (2022) · ACM Computing Surveys · doi:10.1145/3465401 · Cited by 570
The Influence of Media Bias on News Recommender Systems
Ruan, Q., Mac Namee, B., & Dong, R. (2023) · Proceedings of the 31st ACM Conference on User Modeling, Adaptation and Personalization · doi:10.1145/3565472.3595619 · Cited by 4
Metadata
- Authors
- Fang, G., Zhang, T., Zhong, S., Chen, X., Zhong, Z., & Wang, C. C. L.
- Venue
- ACM Transactions on Graphics
- Published
- 2020-11-27
- Volume
- 39
- Issue
- 6
- Pages
- 1-15
- ISSN
- 0730-0301 (ISSN-L)
- 1557-7368
- OpenAlex
- W3108733701
- Cited by
- 161
- References
- 1
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reinforced FDM: multi-axis filament alignment with controlled anisotropic strength. https://app.cochat.ai/papers/10.1145/3414685.3417834
- The paper
- Fang, G., Zhang, T., Zhong, S., Chen, X., Zhong, Z., & Wang, C. C. L. (2020). Reinforced FDM: multi-axis filament alignment with controlled anisotropic strength. ACM Transactions on Graphics. https://doi.org/10.1145/3414685.3417834
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.