The DOI matches its Crossref record; 136 of the 136 references it cites were found in a registry or an index.
Geopolymers and Related Alkali-Activated Materials
Open accessAbstract
The development of new, sustainable, low-CO 2 construction materials is essential if the global construction industry is to reduce the environmental footprint of its activities, which is incurred particularly through the production of Portland cement. One type of non-Portland cement that is attracting particular attention is based on alkali-aluminosilicate chemistry, including the class of binders that have become known as geopolymers. These materials offer technical properties comparable to those of Portland cement, but with a much lower CO 2 footprint and with the potential for performance advantages over traditional cements in certain niche applications. This review discusses the synthesis of alkali-activated binders from blast furnace slag, calcined clay (metakaolin), and fly ash, including analysis of the chemical reaction mechanisms and binder phase assemblages that control the early-age and hardened properties of these materials, in particular initial setting and long-term durability. Perspectives for future research developments are also explored.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Self-citationGeopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Ullmann's Encyclopedia of Industrial Chemistry
(2000) · Wiley eBooks · doi:10.1002/14356007 · Cited by 3,543
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
Atlas of Zeolite Framework Types
(2007) · Elsevier eBooks · doi:10.1016/b978-0-444-53064-6.x5186-x · Cited by 2,493
Industrially interesting approaches to “low-CO2” cements
Gartner, E. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.01.021 · Cited by 2,016
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Self-citationCosts and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,901
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
Self-citation
Cited by
The technological and economic prospects for CO2 utilization and removal
Hepburn, C., Adlen, E., Beddington, J., Carter, E. A., Fuss, S., Mac Dowell, N., Minx, J. C., Smith, P., & Williams, C. K. (2019) · Nature · doi:10.1038/s41586-019-1681-6 · Cited by 2,523
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationLothenbach, B., Kulik, D. A., Matschei, T., Balonis, M., Baquerizo, L., Dilnesa, B., Miron, G. D., & Myers, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.018 · Cited by 1,250
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Metadata
- Authors
- Provis, J. L., & Bernal, S. A.
- Venue
- Annual Review of Materials Research
- Publisher
- Annual Reviews
- Published
- 2014-07-01
- Volume
- 44
- Issue
- 1
- Pages
- 299-327
- ISSN
- 1531-7331 (ISSN-L)
- 1545-4118
- OpenAlex
- W2143106913
- Cited by
- 1,597
- References
- 136
- FWCI
- 54.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Geopolymers and Related Alkali-Activated Materials. https://app.cochat.ai/papers/10.1146/annurev-matsci-070813-113515
- The paper
- Provis, J. L., & Bernal, S. A. (2014). Geopolymers and Related Alkali-Activated Materials. Annual Review of Materials Research. https://doi.org/10.1146/annurev-matsci-070813-113515
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.