Cited by 586Battery Modeling and ManagementAdvancements in Battery MaterialsAdvanced Battery Materials and Technologies

The DOI matches its Crossref record.

Mathematical Modeling of the Lithium Deposition Overcharge Reaction in Lithium‐Ion Batteries Using Carbon‐Based Negative Electrodes

Open access

Arora, Pankaj, Doyle, Marc, White, Ralph E.·1999·Journal of The Electrochemical Society

Open this paper in CoChat — free account Open PDF

Abstract

The processes that lead to capacity fading affect severely the cycle life and rate behavior of lithium‐ion cells. One such process is the overcharge of the negative electrode causing lithium deposition, which can lead to capacity losses including a loss of active lithium and electrolyte and represents a potential safety hazard. A mathematical model is presented to predict lithium deposition on the negative electrode under a variety of operating conditions. The , 2:1 ethylene carbonate/dimethyl carbonate, poly(vinylidene fluoride‐hexalfuoropropylene)| cell is simulated to investigate the influence of lithium deposition on the charging behavior of intercalation electrodes. The model is used to study the effect of key design parameters (particle size, electrode thickness, and mass ratio) on the lithium deposition overcharge reaction. The model predictions are compared for coke and graphite‐based negative electrodes. The cycling behavior of these cells is simulated before and after overcharge to understand the effect of overcharge on extended cycling. These results can be used to establish operational and design limits within which safety hazards and capacity fade problems, inherent in these cells, can be minimized. © 1999 The Electrochemical Society. All rights reserved.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1149/1.1392512

Cites

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

The publisher hasn’t deposited this paper’s reference list.

Research works printed but not linked: 15

P. Arora, R. E. White, and M. Doyle, J. Electrochem. Soc., 145, 3647 (1998).
M. Doyle, T. F. Fuller, and J. Newman, J. Electrochem. Soc., 140, 1527 (1993).
T. F. Fuller, M. Doyle, and J. Newman, J. Electrochem. Soc., 141, 1 (1994).
M. Doyle, J. Newman, A. S. Gozdz, C. N. Schmutz, and J. M. Tarascon, J. Elec- trochem. Soc., 143, 1890 (1996).
P. Arora, M. Doyle, A. S. Gozdz, R. E. White, and J. Newman, Advances in Math- ematical Modeling and Simulation of Electrochemical Processes and Oxygen Depolarized Cathodes for Chlor-Alkali and Chlorate Processes, J. W. Van Zee, T. F. Fuller, P. C. Foller, and F. Hine, Editors, PV 98-10, p. 29, The Electrochemi- cal Society Proceedings Series, Pennington, NJ (1998).
R. Darling and J. Newman, J. Electrochem. Soc., 145, 990 (1998).
A. N. Dey and B. P. Sullivan, J. Electrochem. Soc., 117, 222 (1970).
R. Fong, U. Von Sacken, and J. R. Dahn, J. Electrochem. Soc., 137, 2009 (1990).
J. S. Newman, Electrochemical Systems, 2nd ed., Prentice Hall, Englewood Cliffs, NJ (1991).
R. Jasinski, Advances in Electrochemistry and Electrochemical Engineering, Vol. 8, P. Delahay and C. W. Tobias, Editors, Wiley-Interscience, New York (1971).
M. W. Verbrugge and B. J. Koch, J. Electroanal. Chem., 367, 123 (1994).
M. W. Verbrugge, AIChE J., 41, 1550 (1995).
E. Peled, D. Golodnitsky, C. Menachem, and D. Bar-Tow, J. Electrochem. Soc., 145, 3482 (1998).
Y. Geronov, F. Schwager, and R. H. Muller, in Lithium Nonaqueous Battery Elec- trochemistry, E. G. Yeager, B. Schumm, G. Blomgren, D. R. Blankenship, V. Leger, and J. Akridge, Editors, PV 80-7, p. 115, The Electrochemical Society Proceedings Series, Princeton, NJ (1980).
E. Peled, Ambient Temperature Lithium Batteries, J. P. Gabano, Editor, Academic Press, New York (1983).

Sorted by citations

Items 201–300 of 582

Fast charging lithium-ion battery formation based on simulations with an electrode equivalent circuit model
Drees, R., Lienesch, F., & Kurrat, M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102345 · Cited by 49
Potentiometric MRI of a Superconcentrated Lithium Electrolyte: Testing the Irreversible Thermodynamics Approach
Wang, A. A., Gunnarsdóttir, A. B., Fawdon, J., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01213 · Cited by 58
Lithiation of amorphous carbon negative electrode for Li ion capacitor
Gourdin, G., Smith, P. H., Jiang, T., et al. (2012) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2012.08.029 · Cited by 58
Insight Understanding of External Pressure on Lithium Plating in Commercial Lithium‐Ion Batteries
Yu, H., Wang, L., Zhang, Z., Li, Y., Yang, S., & He, X. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202406966 · Cited by 57
Comparing four model-order reduction techniques, applied to lithium-ion battery-cell internal electrochemical transfer functions
Rodríguez, A., Plett, G. L., & Trimboli, M. S. (2019) · eTransportation · doi:10.1016/j.etran.2019.100009 · Cited by 57
Optimizing Kinetics for Enhanced Potassium‐Ion Storage in Carbon‐Based Anodes
Yang, K., Zhou, W., Fu, Q., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202306190 · Cited by 56
Optimal control and state estimation of lithium-ion batteries using reformulated models
Suthar, B., Ramadesigan, V., Northrop, P. W. C., Gopaluni, R. B., Santhanagopalan, S., Braatz, R. D., & Subramanian, V. R. (2013) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2013.6580673 · Cited by 54
Efficient Global Sensitivity Analysis of 3D Multiphysics Model for Li-Ion Batteries
Lin, N., Xie, X., Schenkendorf, R., & Krewer, U. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1301805jes · Cited by 54
Full Cell Parameterization of a High-Power Lithium-Ion Battery for a Physico-Chemical Model: Part II. Thermal Parameters and Validation
Schmalstieg, J., & Sauer, D. U. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0331816jes · Cited by 55
Mixed Mode Growth Model for the Solid Electrolyte Interface (SEI)
Kamyab, N., Weidner, J., & White, R. (2019) · ECS Meeting Abstracts · doi:10.1149/2.1101902jes · Cited by 53
Self-citation
Mesoscale Anatomy of Dead Lithium Formation
Tewari, D. P., Rangarajan, S. P., Balbuena, P. B., et al. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b11563 · Cited by 55
Multi-dimensional modeling of large-scale lithium-ion batteries
Jung, S., & Kang, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.103 · Cited by 54
Multiscale modeling and characterization for performance and safety of lithium-ion batteries
Pannala, S., Turner, J., Allu, S., et al. (2015) · Journal of Applied Physics · doi:10.1063/1.4927817 · Cited by 53
Negative electrodes for Li-ion batteries
Kinoshita, K., & Zaghib, K. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00206-9 · Cited by 53
Electrochemical Quantification of Lithium Plating: Challenges and Considerations
Tanim, T. R., Dufek, E. J., Dickerson, C. C., & Wood, S. M. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1581912jes · Cited by 51
Life Prediction Methods for Lithium-Ion Batteries Derived from a Fatigue Approach
Safari, M., Morcrette, M., Teyssot, A., & Delacourt, C. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3432560 · Cited by 49
Cycle life performance of lithium-ion pouch cells
Kumaresan, K., Guo, Q., Ramadass, P., & White, R. E. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.08.058 · Cited by 49
Self-citation
Prediction of Reversible Lithium Plating with a Pseudo-3D Lithium-Ion Battery Model
Carelli, S., & Bessler, W. G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab95c8 · Cited by 49
Fast Charging of Li-Ion Cells: Part IV. Temperature Effects and “Safe Lines” to Avoid Lithium Plating
Rodrigues, M. F., Shkrob, I. A., Colclasure, A. M., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abb70d · Cited by 49
Modeling Lithium Intercalation in a Porous Carbon Electrode
Botte, G. G., & White, R. E. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1344517 · Cited by 49
Self-citation
Coupling Lithium Plating with SEI Formation in a Pseudo-3D Model: A Comprehensive Approach to Describe Aging in Lithium-Ion Cells
Carelli, S., & Bessler, W. G. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac716a · Cited by 49
Data-driven autoencoder neural network for onboard BMS Lithium-ion battery degradation prediction
Sudarshan, M., Serov, A., Jones, C. M., Ayalasomayajula, S. M., Garcı́a, R. E., & Tomar, V. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110575 · Cited by 47
A practical semi-empirical model for predicting the SoH of lithium-ion battery: A novel perspective on short-term rest
Park, J., Jin, Y., Kam, W., & Han, S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.112659 · Cited by 49
An adaptive physics-based reduced-order model of an aged lithium-ion cell, selected using an interacting multiple-model Kalman filter
Smiley, A. J., & Plett, G. L. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.07.004 · Cited by 45
Investigation of the temperature dependence of lithium plating onset conditions in commercial Li-ion batteries
Cabañero, M. A., Altmann, J., Gold, L., Boaretto, N., Müller, J., Hein, S., Zausch, J., Kallo, J., & Latz, A. (2019) · Energy · doi:10.1016/j.energy.2019.01.017 · Cited by 45
A Comprehensive Experimental and Modeling Study on Dissolution in Li-Ion Batteries
Lee, Y. K., Park, J., & Lu, W. D. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0111908jes · Cited by 45
Systematic parameter acquisition method for electrochemical model of 4.35 V LiCoO2 batteries
Tang, S., Wang, Z., Guo, H., et al. (2019) · Solid State Ionics · doi:10.1016/j.ssi.2019.115083 · Cited by 45
Lithium deposition on graphite anode during long-term cycles and the effect on capacity loss
Yang, L., Cheng, X.-Q., Gao, Y.-Z., Ma, Y.-L., Zuo, P.-J., Du, C.-Y., Cui, Y., Guan, T., Lou, S., Wang, F., et al. (2014) · RSC Advances · doi:10.1039/c4ra02096k · Cited by 42
Degradation Diagnostics for Commercial Lithium-Ion Cells Tested at − 10°C
Birkl, C. R., McTurk, E., Zekoll, S., et al. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1401712jes · Cited by 44
Multi-Particle Model for a Commercial Blended Lithium-Ion Electrode
Mao, Z., Farkhondeh, M., Pritzker, M. D., Fowler, M. W., & Chen, Z. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0321603jes · Cited by 46
A self‐adaptive, data‐driven method to predict the cycling life of lithium‐ion batteries
Han, C., Gao, Y., Chen, X., Liu, X., Yao, N., Yu, L., Kong, L., & Zhang, Q. (2024) · InfoMat · doi:10.1002/inf2.12521 · Cited by 44
Manufacturing Costs of Batteries for Electric Vehicles
Gallagher, K. G., & Nelson, P. A. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-59513-3.00006-6 · Cited by 48
A continuum model for lithium plating and dendrite formation in lithium-ion batteries: Formulation and validation against experiment
Sahu, S., & Foster, J. M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2022.106516 · Cited by 41
Balancing-Aware Charging Strategy for Series-Connected Lithium-Ion Cells: A Nonlinear Model Predictive Control Approach
Pozzi, A., Zambelli, M., Ferrara, A., & Raimondo, D. M. (2020) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2020.2995308 · Cited by 41
Modeling Overcharge at Graphite Electrodes: Plating and Dissolution of Lithium
Baker, D. R., & Verbrugge, M. W. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0042001jes · Cited by 41
Development of Durable 3-Electrode Lithium-Ion Pouch Cells with LTO Reference Mesh: Aging and Performance Studies
Epding, B., Broda, A., Rumberg, B., Jahnke, H., & Kwade, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0851908jes · Cited by 39
Experimental study of the effect of different pulse charging patterns on lithium-ion battery charging
Liu, J., & Wang, X. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234700 · Cited by 42
Electrochemical Modeling, Estimation and Control of Lithium Ion Batteries
Smith, K. A. (2006) · Cited by 40
Optimal charging of lithium-ion batteries based on lithium precipitation suppression
Yu, C., Huang, S., Xu, H., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.110580 · Cited by 39
A Review on Lithium-Ion Battery Modeling from Mechanism-Based and Data-Driven Perspectives
Ji, C., Dai, J., Zhai, C., Wang, J., Tian, Y., & Sun, W. H. (2024) · Processes · doi:10.3390/pr12091871 · Cited by 45
Geometric Design of Interface Structures and Electrolyte Solvation Chemistry for Fast Charging Lithium‐Ion Batteries
Song, C., Han, S., Choi, Y., Shin, H. R., Kim, M. K., Gong, C., Chen, D., Lee, J.-W., Hong, S., & Choi, N.-S. (2025) · Advances in Materials · doi:10.1002/adma.202418773 · Cited by 40
Multiscale Simulations for Lithium-Ion Batteries: SEI Film Growth and Capacity Fading
Shinagawa, C., Ushiyama, H., & Yamashita, K. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0381713jes · Cited by 39
Optimal Fast Charging Method for a Large-Format Lithium-Ion Battery Based on Nonlinear Model Predictive Control and Reduced Order Electrochemical Model
Yin, Y., Bi, Y., Hu, Y., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abd607 · Cited by 40
Safety assessment of thermal runaway behavior of lithium-ion cells with actual installed state
Zhou, Y., Zhu, X., Wang, Z., Shan, T., Zhang, J., & Sun, Z. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120617 · Cited by 38
Recent Advances and Opportunities in Reactivating Inactive Lithium in Batteries
Li, Q., Liu, H., Wu, F., et al. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202404554 · Cited by 38
Electrochemical–thermal modeling for a ternary lithium ion battery during discharging and driving cycle testing
Huo, W., He, H., & Sun, F. (2015) · RSC Advances · doi:10.1039/c5ra09018k · Cited by 38
Size Dependence of Transport Non-Uniformities on Localized Plating in Lithium-Ion Batteries
Liu, X. M., Fang, A., Haataja, M., & Arnold, C. B. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1181805jes · Cited by 38
Applications of Carbon Dots in Next‐generation Lithium‐Ion Batteries
Song, T., Huang, Z., Niu, X., et al. (2020) · ChemNanoMat · doi:10.1002/cnma.202000355 · Cited by 38
Mechanistic modeling of Li plating in lithium-ion batteries
Li, J., Liu, B., Li, S., Hu, D., Wang, L., & Xu, J. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230936 · Cited by 36
Interplay of intercalation dynamics and lithium plating in monolithic and architectured graphite anodes during fast charging
Mijailovic, A. S., Waag‐Swift, S., Wang, G., Zhou, B., Luo, M., Lu, W., Wu, Q., & Sheldon, B. W. (2024) · Energy & Environmental Science · doi:10.1039/d4ee02211d · Cited by 35
Non-equilibrium insertion of lithium ions into graphite
Li, N., Sun, M., Hwang, S., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta02836g · Cited by 36
Modeling of Lithium plating in lithium ion batteries based on Monte Carlo method
Zhang, L., Liu, L., Gao, X., Pan, Y., Liu, X., & Feng, X. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231568 · Cited by 36
Real-Time Prediction of Anode Potential in Li-Ion Batteries Using Long Short-Term Neural Networks for Lithium Plating Prevention
Lin, X. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0621910jes · Cited by 37
Faster and Healthier Charging of Lithium-Ion Batteries via Constrained Feedback Control
Couto, L. D., Romagnoli, R., Park, S., Zhang, D., Moura, S. J., Kinnaert, M., & Garone, E. (2021) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2021.3135149 · Cited by 35
Modeling the effect of aging on the electrical and thermal behaviors of a lithium-ion battery during constant current charge and discharge cycling
Yi, J., Koo, B., Shin, C. B., Han, T., & Park, S. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.01.006 · Cited by 33
Quantifying Electrochemical Reactions and Properties of Amorphous Silicon in a Conventional Lithium-Ion Battery Configuration
Wang, X., Singh, S. S., Ma, T., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00701 · Cited by 34
Communication—Implications of Local Current Density Variations on Lithium Plating Affected by Cathode Particle Size
Abboud, A. W., Dufek, E. J., & Liaw, B. Y. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0711904jes · Cited by 34
Mechanistic Analysis of Microstructural Attributes to Lithium Plating in Fast Charging
Kabra, V., Parmananda, M., Fear, C., Usseglio‐Viretta, F. L. E., Colclasure, A. M., Smith, K. A., & Mukherjee, P. P. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15144 · Cited by 35
In situ neutron radiography analysis of graphite/NCA lithium-ion battery during overcharge
Same, A., Battaglia, V., Tang, H.-Y., et al. (2011) · Journal of Applied Electrochemistry · doi:10.1007/s10800-011-0363-3 · Cited by 34
Perspective on fast-charging lithium-ion batteries: Mechanism, detection, and suppression of graphite anode lithium plating
Shu, W., Zeng, Z., Qin, M., et al. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104479 · Cited by 33
Internal short circuits in lithium-ion batteries; origins, detection, and experimental reproduction: A review
Setta, J., Lecocq, A., Desprez, P., Origuchi, M., Destriau, L., Marlair, G., Carlier, D., Croguennec, L., & Bordes, A. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238265 · Cited by 38
Comparison of Lithium-Ion Anode Materials Using an Experimentally Verified Physics-Based Electrochemical Model
Fu, R., Zhou, X., Fan, H., Blaisdell, D., Jagadale, A. D., Zhang, X., & Xiong, R. (2017) · Energies · doi:10.3390/en10122174 · Cited by 33
Thermal behavior of lithium-ion battery under variation of convective heat transfer coefficients, surrounding temperatures, and charging currents
Hamisi, C. M., Gerutu, G. B., Greyson, K. A., et al. (2022) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2022.104922 · Cited by 33
In situ X-ray spatial profiling reveals uneven compression of electrode assemblies and steep lateral gradients in lithium-ion coin cells
Okasinski, J., Shkrob, I. A., Chuang, A. C., et al. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp04436a · Cited by 32
A three-dimensional meso-macroscopic model for Li-Ion intercalation batteries
Allu, S., Kalnaus, S., Simunovic, S., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.001 · Cited by 32
A MODELLING APPROACH TO UNDERSTAND CHARGE DISCHARGE DIFFERENCES IN THERMAL BEHAVIOUR IN LITHIUM IRON PHOSPHATE – GRAPHITE BATTERY
Maheshwari, A., Dumitrescu, M. A., Destro, M., et al. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.05.049 · Cited by 32
4-Electrode Full Cells for Operando Li+ Activity Measurements and Prevention of Li Deposition in Li-Ion Cells
Hogg, B.-I., Waldmann, T., & Wohlfahrt‐Mehrens, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8976 · Cited by 31
Revisiting the Structural Evolution of MoS2 During Alkali Metal (Li, Na, and K) Intercalation
Wang, G., Zhang, Y., Cho, H. S., Zhao, X., Kim, F., & Zou, J. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c02937 · Cited by 32
Real-time estimation of negative electrode potential and state of charge of lithium-ion battery based on a half-cell-level equivalent circuit model
Zhang, C., Amietszajew, T., Li, S., et al. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104362 · Cited by 31
SOC and SOH estimation for Li-ion batteries based on an equivalent hydraulic model. Part I: SOC and surface concentration estimation
Couto, L. D., Schorsch, J., Nicotra, M. M., & Kinnaert, M. (2016) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2016.7525553 · Cited by 31
Efficient and robust lithium metal electrodes enabled by synergistic surface activation–passivation of copper frameworks
Yun, J., Won, E.-S., Shin, H., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08779f · Cited by 31
Mathematical modeling of high-power-density insertion electrodes for lithium ion batteries
Verbrugge, M. W., Baker, D. R., & Koch, B. J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00192-1 · Cited by 31
A critical look at efficient parameter estimation methodologies of electrochemical models for Lithium-Ion cells
Rojas, C., Oca, L., Lopetegi, I., Iraola, U., & Carrasco, J. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110384 · Cited by 30
Fast Charging of Li-Ion Cells: Part V. Design and Demonstration of Protocols to Avoid Li-Plating
Shkrob, I. A., Rodrigues, M. F., & Abraham, D. P. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abd609 · Cited by 30
Investigating effects of pulse charging on performance of Li-ion batteries at low temperature
Liu, J., & Wang, X. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233177 · Cited by 30
Safety Analysis of Lithium-Ion Cylindrical Batteries Using Design and Process Failure Mode and Effect Analysis
Maddipatla, S., Kong, L., & PECHT, M. G. (2024) · Batteries · doi:10.3390/batteries10030076 · Cited by 29
Sensitivity and reliability of key electrochemical markers for detecting lithium plating during extreme fast charging
Chinnam, P. R., Tanim, T. R., Dufek, E. J., et al. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103782 · Cited by 29
Fast Charging of Li-Ion Cells: Part II. Nonlinear Contributions to Cell and Electrode Polarization
Shkrob, I. A., Rodrigues, M. F., Dees, D. W., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0561914jes · Cited by 29
Modeling Lithium Plating Onset on Porous Graphite Electrodes Under Fast Charging with Hierarchical Multiphase Porous Electrode Theory
Lian, H., & Bazant, M. Z. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad1e3d · Cited by 28
Online adaptive anode potential-controlled fast charging of lithium-ion cells using a validated electrochemical model-based virtual reference electrode
Oehler, F. F., Deuschl, X., Nürnberger, K., et al. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234620 · Cited by 28
Demystifying Mathematical Modeling of Electrochemical Systems
Stephens, L. I., & Mauzeroll, J. (2019) · Journal of Chemical Education · doi:10.1021/acs.jchemed.9b00542 · Cited by 28
A Framework for Optimal Safety Li-ion Batteries Design using Physics-Based Models and Machine Learning Approaches
Yamanaka, T., Takagishi, Y., & Yamaue, T. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab975c · Cited by 28
Investigation on step overcharge to self-heating behavior and mechanism analysis of lithium ion batteries
Yun, F., Liu, S., Gao, M., et al. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.12.033 · Cited by 28
Carbon Materials in Lithium-Ion Batteries
Novák, P., Goers, D., & Spahr, M. E. (2009) · Advanced materials and technologies series/Advanced materials and technologies · doi:10.1201/9781420055405-c7 · Cited by 28
Simple approach using g-C3N4 to enable SnO2 anode high rate performance for Li ion battery
Versaci, D., Amici, J., Francia, C., et al. (2019) · Solid State Ionics · doi:10.1016/j.ssi.2019.115210 · Cited by 28
High sensitivity detection of lithium plating in high-energy lithium-ion batteries based on time-domain distribution relaxation times analysis
Wang, Y., Zhou, X., Ruixi, W., et al. (2024) · Energy storage materials · doi:10.1016/j.ensm.2024.103369 · Cited by 27
PINN surrogate of Li-ion battery models for parameter inference, Part II: Regularization and application of the pseudo-2D model
Hassanaly, M., Weddle, P. J., King, R., et al. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113104 · Cited by 26
Behavioral description of lithium-ion batteries by multiphysics modeling
Yang, H., Li, X., Fu, K., Shang, W., Sun, K., Yang, Z., Hu, G., & Tan, P. (2024) · DeCarbon · doi:10.1016/j.decarb.2024.100076 · Cited by 29
Physics-Based and Data-Driven Modeling of Degradation Mechanisms for Lithium-Ion Batteries—A Review
Ruiz, P. L., Damianakis, N., & Mouli, G. R. C. (2025) · IEEE Access · doi:10.1109/access.2025.3535918 · Cited by 36
The Effects of Temperature and Cell Parameters on Lithium-Ion Battery Fast Charging Protocols: A Model-Driven Investigation
Tomaszewska, A., Parkes, M., Doel, R., Offer, G. J., & Wu, B. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac79d3 · Cited by 25
Modeling and Analysis of Heat Generation Rate of a Large Format Pouch-Type Lithium-Ion Battery Considering Degradation
Song, M., Hu, Y., Choe, S.-Y., & Garrick, T. R. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac7a5f · Cited by 25
Bayesian calibration for electrochemical thermal model of lithium-ion cells
Tagade, P., Hariharan, K. S., Basu, S., Verma, M. K. S., Kolake, S. M., Song, T., Oh, D., Yeo, T., & Doo, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.106 · Cited by 26
Analysis of Degradation of Si/Carbon||LiNi0.5Mn0.3Co0.2O2Full Cells: Effect of Prelithiation
Rezqita, A., Anish Raj, K., Kahr, J., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0671903jes · Cited by 26
A framework for charging strategy optimization using a physics-based battery model
Lin, X., Wang, S., & Kim, Y. (2019) · Journal of Applied Electrochemistry · doi:10.1007/s10800-019-01322-1 · Cited by 26
Swelling Mechanisms, Diagnostic Applications, and Mitigation Strategies in Lithium-Ion Batteries
Maddipatla, S., Rauf, H., Osterman, M. D., Arshad, N., & PECHT, M. G. (2025) · Batteries · doi:10.3390/batteries11100356 · Cited by 27
Influence of Li Concentration-Dependent Diffusion Coefficient and Modulus Hardening on Diffusion-Induced Stresses in Anisotropic Anode Particles
Cai, X., & Guo, Z. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abd82e · Cited by 25
Interplay of Electrode Heterogeneity and Lithium Plating
Hamedi, A., Pouraghajan, F., Sun, F., Nikpour, M., & Wheeler, D. R. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac5304 · Cited by 24
MULTIBAT: Unified workflow for fast electrochemical 3D simulations of lithium-ion cells combining virtual stochastic microstructures, electrochemical degradation models and model order reduction
Feinauer, J., Hein, S., Rave, S., et al. (2018) · Journal of Computational Science · doi:10.1016/j.jocs.2018.03.006 · Cited by 25
Thermal behavior of LiFePO4 battery at faster C-rates and lower ambient temperatures
Sarkar, S., Amin, M. T., El‐Halwagi, M. M., et al. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.03.095 · Cited by 24
Real-Time Electrochemical Model-Based BMS Control for Mitigating Li-Plating and Extending Battery Life
Qasem, M., Haddadin, M., Yassin, Y., Ratrout, S., Chen, C., Stoyanov, S., Al‐Hallaj, S., & Krishnamurthy, M. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3527899 · Cited by 26

Authors: Arora, P., Doyle, M., & White, R. E.
Affiliations: University of South Carolina (US)
DuPont (United States) (US)
ORCID: White, Ralph E.
Venue: Journal of The Electrochemical Society
Publisher: The Electrochemical Society
Published: 1999-10-01
Volume: 146
Issue: 10
Pages: 3543-3553
ISSN: 0013-4651 (ISSN-L)
1945-7111
DOI: 10.1149/1.1392512
OpenAlex: W2059262407
Cited by: 586
References: 0
Citations by year: 2026: 41 · 2025: 58 · 2024: 57 · 2023: 42 · 2022: 46 · 2021: 44 · 2020: 50 · 2019: 44 · 2018: 31 · 2017: 28 · 2016: 17 · 2015: 25 · 2014: 22 · 2013: 11 · 2012: 13
FWCI: 7.60
Type: journal article
Language: en
Open access: bronze
doi.org
Licence: iopscience.iop.org/page/copyright (vor, 7371 d)
iopscience.iop.org/info/page/text-and-data-mining (tdm, 7371 d)
Locations: Journal of The Electrochemical Society (publishedVersion)
Scholar Commons (University of South Carolina) (submittedVersion)
Funders: Office of Research and Development
University of South Carolina
Topics: Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Keywords: lithium plating, overcharging, lithium-ion batteries, carbon negative electrode, capacity fade, mathematical modeling, coke, graphite, intercalation electrodes, particle size, electrode thickness, mass ratio, cycling behavior, safety hazards, PVDF-HFP

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Mathematical Modeling of the Lithium Deposition Overcharge Reaction in Lithium‐Ion Batteries Using Carbon‐Based Negative Electrodes

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks