Low-Temperature Characterization of Lithium-Ion Carbon Anodes via Microperturbation Measurement
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The low-temperature performance limits of Johnson Matthey (JM) 287 graphite and mesocarbon microbead (MCMB) 6-10 coke were investigated using galvanostatic intermittent titration (GITT) and electrochemical impedance spectroscopy. The poor low-temperature performance of graphite insertion anodes results from a low lithium insertion capacity because polarization or overpotential is higher than the stage transformation plateau potential. This results in a shorter plateau potential region containing the lithium-rich stages, e.g. , and Overall, there is an incomplete transformation from Li-poor to Li-rich stages when the cutoff potential is limited to 0.0 V ( vs. to avoid metallic lithium deposition. The good low-temperature performance of MCMB 6-10 coke is attributed to the smooth change of equilibrium Li content as a function of potential. The high polarization only decreases Li insertion capacity by a small percentage. At room temperature, stage transformation is the rate-controlling step of electrochemical Li insertion-extraction kinetics for JM 287 graphite. However, at the resistance of solid electrolyte interphase film increases by a factor of over 27, and becomes limiting. © 2002 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Low-Temperature Behavior of Li-Ion Cells
Lin, H.-P., Chua, D., Salomon, M., Shiao, H.-C., Hendrickson, M., Plichta, E., & Slane, S. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1368736 · Cited by 248
Cited by
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Electrochemical impedance study on the low temperature of Li-ion batteries
Zhang, S. S., Xu, K., & Jow, T. R. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.10.016 · Cited by 933
Metadata
- Authors
- Wang, C., Appleby, A. J., & Little, F. E.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2002
- Volume
- 149
- Issue
- 6
- Pages
- A754
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2107125464
- Cited by
- 100
- References
- 1
- FWCI
- 4.21
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.