The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Characterization of Gas Diffusion Layers for PEMFC
Abstract
In proton-exchange membrane fuel cells (PEMFC), gas diffusion layers serve as current collectors that allow ready access of fuel and oxidant to the anode and the cathode catalyst surfaces, respectively. Critical properties of five commercial and one in-house gas diffusion layers have been characterized and compared to determine factors limiting the oxygen transport in the cathode gas diffusion layer where there is no oxygen consumption. These properties are the limiting current, electronic resistivity, fraction of hydrophobic pores, gas permeability, pore size distribution, and surface morphology. Polarization curves using air and neat oxygen were collected to determine the air-limiting currents at three operating conditions: 80°C/75% relative humidity (RH) cathode inlet, 100°C/70% RH cathode inlet, and 120°C/35% RH cathode inlet, all at atmospheric pressure. Linear empirical relationships for permeability coefficient vs. limiting current were found at all three conditions. Characterization of the gas diffusion layers by porosimetry measurement provides the pore size distribution for the gas diffusion layers, which helps in understanding the correlation between the permeability coefficient and the limiting current at the temperatures and relative humidity tested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell
Bernardi, D. M., & Verbrugge, M. W. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221251 · Cited by 1,368
Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells
Springer, T. E., Wilson, M. S., & Gottesfeld, S. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221120 · Cited by 581
Wilson, M. S., Valerio, J. A., & Gottesfeld, S. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(94)00272-3 · Cited by 476
Paganin, V. A., Ticianelli, E. A., & Gonzalez, E. R. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00242099 · Cited by 437
BROKA, K., & EKDUNGE, P. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018469520562 · Cited by 360
Diffusion layer parameters influencing optimal fuel cell performance
Jordan, L. R., Shukla, A. K., Behrsing, T., Avery, N. R., Muddle, B. C., & Forsyth, M. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00489-9 · Cited by 319
Giorgi, L., Antolini, E., Pozio, A., & Passalacqua, E. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00125-x · Cited by 304
Investigation of Mass-Transport Limitations in the Solid Polymer Fuel Cell Cathode
Jaouen, F., Lindbergh, G., & Sundholm, G. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1456916 · Cited by 275
Gas Permeation Properties of Solid Polymer Electrolyte (SPE) Membranes
Sakai, T., Takenaka, H., Wakabayashi, N., Kawami, Y., & Torikai, E. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2114111 · Cited by 247
Gas Diffusion in the Dried and Hydrated Nafions
Sakai, T., Takenaka, H., & Torikai, E. (1986) · Journal of The Electrochemical Society · doi:10.1149/1.2108551 · Cited by 227
Passalacqua, E., Squadrito, G., Lufrano, F., Patti, A., & Giorgi, L. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1017547112282 · Cited by 160
Rho, Y. W., Srinivasan, S., & Kho, Y. T. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2055066 · Cited by 153
Development of a compact 500 W class direct methanol fuel cell stack
Dohle, H., Schmitz, H., Bewer, T., Mergel, J., & Stolten, D. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01064-3 · Cited by 140
Jordan, L. R., Shukla, A., Behrsing, T., Avery, N. R., Muddle, B. C., & Forsyth, M. (2000) · Journal of Applied Electrochemistry · doi:10.1023/a:1004088402496 · Cited by 130
Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs
Lufrano, F., Passalacqua, E., Squadrito, G., Patti, A. F., & Giorgi, L. (1999) · Journal of Applied Electrochemistry · doi:10.1023/a:1026419102310 · Cited by 107
The voltage–current curve of a polymer electrolyte fuel cell: “exact” and fitting equations
Kulikovsky, A. A. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00466-6 · Cited by 57
Cited by
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Review: Durability and Degradation Issues of PEM Fuel Cell Components
de Bruijn, F. A., Dam, V. A. T., & Janssen, G. J. M. (2008) · Fuel Cells · doi:10.1002/fuce.200700053 · Cited by 1,001
A review of gas diffusion layer in PEM fuel cells: Materials and designs
Park, S., Lee, J.-W., & Popov, B. N. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.12.148 · Cited by 560
Gas diffusion layer for proton exchange membrane fuel cells—A review
Cindrella, L., Kannan, A. M., Lin, J. F., Saminathan, K., Ho, Y., Lin, C. W., & Wertz, J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.04.005 · Cited by 557
In-plane and through-plane gas permeability of carbon fiber electrode backing layers
Gostick, J. T., Fowler, M. W., Pritzker, M. D., Ioannidis, M. A., & Behra, L. M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.096 · Cited by 551
Metadata
- Authors
- Williams, M. V., Begg, E., Bonville, L., Kunz, H. R., & Fenton, J. M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2004
- Volume
- 151
- Issue
- 8
- Pages
- A1173
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2032401549
- Cited by
- 330
- References
- 16
- FWCI
- 16.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.