The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
In-plane and through-plane gas permeability of carbon fiber electrode backing layers
Open accessAbstract
The absolute gas permeability of several common gas diffusion layer (GDL) materials for polymer electrolyte membrane fuel cells was measured. Measurements were made in three perpendicular directions to investigate anisotropic properties. Most materials were found to display higher in-plane permeability than through-plane permeability. The permeability in the two perpendicular in-plane directions was found to display significant anisotropy. Materials with the most highly aligned fibers showed the highest anisotropy and the permeability could differ by as much as a factor of 2. In-plane permeability was also measured as the GDL was compressed to different thicknesses. Typically, compression of a sample to half its initial thickness resulted in a decrease in permeability by an order of magnitude. Since the change in GDL thickness during compression can be converted to porosity, the relationship between measured permeability and porosity was compared to various models available in the literature, one of which allows the estimation of anisotropic tortuosity. The effect of inertia on fluid flow was also determined and found to vary inversely with permeability, in agreement with available correlations. The results of this work will be useful for 3D modeling studies where knowledge of permeability and effective diffusivity tensors is required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Cited by
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Zamel, N., & Li, X. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.07.002 · Cited by 217
A technical review on gas diffusion, mechanism and medium of PEM fuel cell
Jayakumar, A., Sethu, S. P., Ramos, M., Robertson, J., & Al-Jumaily, A. (2015) · Ionics · doi:10.1007/s11581-014-1322-x · Cited by 148
Hasanpour, S., Rashidi, A., Walsh, T., Pagan, E., Milani, A. S., Akbari, M., & Djilali, N. (2021) · ACS Omega · doi:10.1021/acsomega.0c06309 · Cited by 17
Metadata
- Authors
- Gostick, J. T., Fowler, M. W., Pritzker, M. D., Ioannidis, M. A., & Behra, L. M.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2006-11
- Volume
- 162
- Issue
- 1
- Pages
- 228-238
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W1970779109
- Cited by
- 551
- References
- 1
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In-plane and through-plane gas permeability of carbon fiber electrode backing layers. https://app.cochat.ai/papers/10.1016/j.jpowsour.2006.06.096
- The paper
- Gostick, J. T., Fowler, M. W., Pritzker, M. D., Ioannidis, M. A., & Behra, L. M. (2006). In-plane and through-plane gas permeability of carbon fiber electrode backing layers. Journal of Power Sources. https://doi.org/10.1016/j.jpowsour.2006.06.096
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.