Properties of Gas Diffusion Electrodes Containing Sulfonated Poly(ether ether ketone)
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The use of sulfonated poly(ether ether ketone) as the proton-conducting medium within the electrocatalytic layer of fuel cell gas diffusion electrodes (GDEs) is described. An electrochemically active surface area determined by cyclic voltammetry and electrochemical impedance spectroscopy was studied as a function of ion exchange capacity. Maximum activity is related to the concentration of sulfonate groups within the catalyst layer. Despite their relatively high electrochemical surface area and catalyst utilization, fuel cell performance is rather poor compared to Nafion-based GDEs. Fuel cell performance is greatly enhanced when polytetrafluoroethylene (PTFE) is incorporated into the catalyst layer. The addition of PTFE results in GDEs with larger pore diameters that are less prone to flooding. The incorporation of an ionomer of similar chemical structure to the proton-conducting membrane employed is shown to reduce interfacial resistance. Electrode structures of this type may prove useful for investigating other novel proton-conducting materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Development of ionomer membranes for fuel cells
Kerres, J. A. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00631-1 · Cited by 1,022
New membranes for direct methanol fuel cells
Jörissen, L., Gogel, V., Kerres, J., & Garche, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00952-1 · Cited by 279
Sulfonated Poly(ether ether ketone) Membranes for Direct Methanol Fuel Cells
Yang, B., & Manthiram, A. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1613073 · Cited by 139
Zhang, L., Ma, C., & Mukerjee, S. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00257-3 · Cited by 102
Cited by
Anion exchange membrane fuel cells: Current status and remaining challenges
Gottesfeld, S., Dekel, D. R., Page, M., Bae, C., Yan, Y., Zelenay, P., & Kim, Y. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.010 · Cited by 895
Proton exchange membrane fuel cell from low temperature to high temperature: Material challenges
Shao, Y., Yin, G., Wang, Z., & Gao, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.02.065 · Cited by 571
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Self-citationMicrostructure of Catalyst Layers in PEM Fuel Cells Redefined: A Computational Approach
Malek, K., Mashio, T., & Eikerling, M. (2011) · Electrocatalysis · doi:10.1007/s12678-011-0047-0 · Cited by 151
Fuel cell catalyst layers containing short-side-chain perfluorosulfonic acid ionomers
Peron, J., Edwards, D., Haldane, M., Luo, X., Zhang, Y., Holdcroft, S., & Shi, Z. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.050 · Cited by 77
Self-citationInvestigation of the Impact of Interfacial Delamination on Polymer Electrolyte Fuel Cell Performance
Kim, S., Khandelwal, M., Chacko, C., & Mench, M. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3006398 · Cited by 58
Sambandam, S., & Ramani, V. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/b921916a · Cited by 49
Metadata
- Authors
- Easton, E. B., Astill, T. D., & Holdcroft, S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 4
- Pages
- A752
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2089332217
- Cited by
- 83
- References
- 5
- FWCI
- 4.77
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.