Influence of binder properties on kinetic and transport processes in polymer electrolyte fuel cell electrodes
The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Abstract
The objectives of this study are to estimate the contributions of kinetic, ohmic and mass transport overpotentials to the overall voltage loss in polymer electrolyte membrane fuel cell (PEMFC) electrodes and to relate these overpotentials to electrode binder properties such as ionic conductivity, ion exchange capacity (IEC) and O(2) permeability. The model electrode binders studied were perfluorosulfonic acid ionomers (PFSA; of IECs 1.35 meq g(-1) and 0.95 meq g(-1)), sulfonated poly ether ether ketone (SPEEK; of IECs 1.35, 1.75 and 2.1 meq g(-1)) and sulfonated poly sulfone (SPSU; of IEC 1.5 meq g(-1)). The O(2) permeability of these binders varied from 0.15 x 10(-12) mol cm(-1) s(-1) for SPSU to 6 x 10(-12) mol cm(-1) s(-1) for PFSA IEC 0.95 meq g(-1) at 80 degrees C and 75%RH. The electrodes prepared were characterized by cyclic voltammetry to estimate electrochemically active surface area (ECA) of platinum. Steady state polarization (V-I) experiments were performed with hydrogen as fuel and oxidants including O(2), 21% O(2)/N(2) (air), 21% O(2)/He (Helox) and 4% O(2)/N(2). The V-I data obtained was analyzed to determine the relative contributions of the different sources of polarization in the electrode. Electrodes prepared with PFSA binders had similar ECAs of 28 m(2) g(-1)-Pt, while those prepared using hydrocarbon binders had an ECA of 10 to 14 m(2) g(-1)-Pt at 80 degrees C and 75%RH. The same trend was seen in mass activity. At optimized binder loadings, a semi-quantitative relationship was obtained relating binder O(2) permeability to the mass transport losses within the electrode. Furthermore, a novel semi-quantitative method of plotting helox-air voltage gain against O(2)-air gain was employed to probe the O(2) transport limitations in the electrodes. Based on this analysis, it is suggested that the SPEEK and SPSU bound electrodes suffered from binder phase diffusion limitations in addition to gas phase diffusion limitation, while the PFSA bound electrodes predominantly exhibited gas-phase diffusion limitations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adsorbed ionomer and the amount, size, and configuration of non-absorbed ionomer and thus optimum I/C ratio are sensitive to the catalyst, ionomer, and solvent [23,91,120].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [120]
In the citing paper
“For example, it was observed that the optimal ionomer content in the CL is dependent on the catalyst or the EW of the ionomer [120].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [120]
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Alternative Polymer Systems for Proton Exchange Membranes (PEMs)
Hickner, M. A., Ghassemi, H., Kim, Y. S., Einsla, B. R., & McGrath, J. E. (2004) · Chemical Reviews · doi:10.1021/cr020711a · Cited by 2,834
Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers
Rikukawa, M., & Sanui, K. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00032-0 · Cited by 1,553
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Solid polymer electrolyte membranes for fuel cell applications—a review
Smitha, B., Sridhar, S., & Khan, A. A. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.01.035 · Cited by 1,216
Non-Fluorinated Polymer Materials for Proton Exchange Membrane Fuel Cells
Rozière, J., & Jones, D. J. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.022702.154657 · Cited by 786
Parthasarathy, A., Srinivasan, S., Appleby, A. J., & Martin, C. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221258 · Cited by 687
Proton exchange membrane fuel cell from low temperature to high temperature: Material challenges
Shao, Y., Yin, G., Wang, Z., & Gao, Y. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.02.065 · Cited by 571
Recent developments in proton exchange membranes for fuel cells
Devanathan, R. (2008) · Energy & Environmental Science · doi:10.1039/b808149m · Cited by 528
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Research works printed but not linked: 4
- Song, 2005, Electrochim. Acta, 50, 3358
- Litster, 2004, J. Power Sources, 130, 61, 10.1016/j.jpowsour.2003.12.055 · DOI · Paper page
- Song, 2006, J. Power Sources, 154, 138, 10.1016/j.jpowsour.2005.04.001 · DOI
- Xu, 2007, J. Electrochem. Soc., 154, 8
Cited by
Wang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
Kumar, A., & Ramani, V. (2014) · ACS Catalysis · doi:10.1021/cs500116h · Cited by 190
Self-citationArges, C. G., Wang, L., Parrondo, J., & Ramani, V. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.049311jes · Cited by 104
Self-citationUnderstanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Zamel, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.091 · Cited by 93
Metadata
- Authors
- Sambandam, S., & Ramani, V.
- Affiliations
- Illinois Institute of Technology (US)
- Corresponding author
- Ramani, Vijay
- ORCID
- Ramani, Vijay
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 12
- Issue
- 23
- Pages
- 6140
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2035494358
- Cited by
- 49
- References
- 53
- Citations by year
- 2025: 4 · 2024: 2 · 2023: 4 · 2022: 3 · 2021: 6 · 2020: 2 · 2019: 4 · 2018: 5 · 2017: 2 · 2016: 1 · 2015: 4 · 2014: 3 · 2013: 4 · 2012: 3
- FWCI
- 2.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Physical Chemistry Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, electrode binder, oxygen permeability, mass transport overpotential, ohmic overpotential, kinetic overpotential, perfluorosulfonic acid ionomer, sulfonated poly(ether ether ketone), ion exchange capacity, hydrogen oxidation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of binder properties on kinetic and transport processes in polymer electrolyte fuel cell electrodes. https://app.cochat.ai/papers/10.1039/b921916a
- The paper
- Sambandam, S., & Ramani, V. (2010). Influence of binder properties on kinetic and transport processes in polymer electrolyte fuel cell electrodes. Physical Chemistry Chemical Physics. https://doi.org/10.1039/b921916a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.