The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Cyclable Lithium and Capacity Loss in Li-Ion Cells
Open accessAbstract
In lithium-ion cells, there are several different classes of capacity loss, both reversible and irreversible, that limit the cell's exploitable specific capacity and can lead to eventual cell failure. We attempt to clarify what is meant by capacity loss and cyclable lithium loss by defining these terms in the context of electrode state-of-charge restrictions. We define irreversible capacity loss as that associated with active material loss and define two types of reversible capacity loss associated with balanced and unbalanced side reactions. We also examine several methods of compensating for cyclable lithium loss associated with passive-film formation and calculate the effect each has on a cell's specific energy. Preforming the negative electrode, adding cyclable lithium to the positive electrode, and introducing lithium powder into the negative electrode appear to be the most attractive methods in terms of specific energy, but practical constraints such as fabrication cost must be evaluated to determine which is superior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Cited by
Data-driven prediction of battery cycle life before capacity degradation
Severson, K. A., Attia, P. M., Jin, N., Perkins, N., Jiang, B., Yang, Z., Chen, M. H., Aykol, M., Herring, P. K., Fraggedakis, D., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0356-8 · Cited by 3,228
A review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745
Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study
Waldmann, T., Wilka, M., Kasper, M., Fleischhammer, M., & Wohlfahrt-Mehrens, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.112 · Cited by 1,203
Synthesize battery degradation modes via a diagnostic and prognostic model
Dubarry, M., Truchot, C., & Liaw, B. Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.016 · Cited by 1,065
Zhang, Y., Tang, Q., Zhang, Y., Wang, J., Stimming, U., & Lee, A. A. (2020) · Nature Communications · doi:10.1038/s41467-020-15235-7 · Cited by 889
“The conventional approach to battery forecasting relies on modelling microscopic degradation mechanisms, such as the growth of the solid-electrolyte interphase 5,6 , lithium plating 7,8 and active material loss 9,10 .”
Background
Metadata
- Authors
- Christensen, J., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 4
- Pages
- A818
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2022747124
- Cited by
- 208
- References
- 1
- FWCI
- 2.86
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.