The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Effect of Thickness and Hydrophobic Polymer Content of the Gas Diffusion Layer on Electrode Flooding Level in a PEMFC
Open accessAbstract
The effect of thickness and wetproof level of the gas diffusion layer on electrode flooding and cell performance was investigated. Three types of gas diffusion media were tested: SGL SIGRACET carbon papers, with and without a microporous layer, and Toray TGPH carbon paper without a microporous layer. Overall, it was found that SGL carbon paper with the microporous layer gave the best fuel cell performance even at low air stoichiometries. It was also found that adding poly(tetrafluoroethylene) (PTFE) to the gas diffusion layer could enhance gas transport and water transport when a cell operates under flooding condition, but excessive PTFE loading could lead to a high flooding level in the catalyst layer. It is our opinion that a combination of hydrophobic pores for gas transport and hydrophilic pores for liquid water transport within the macroporous layer is needed. It is also our opinion that the optimal ratio of hydrophobic and hydrophilic pores depends on the pore size and its distribution. Finally, it was observed that without the microporous layer, thinner gas diffusion materials were more sensitive to liquid water accumulation than the thicker ones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of fuel cells: fundamentals, technology, and applications
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00850-x · Cited by 3,324
Nam, J. H., & Kaviany, M. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00305-3 · Cited by 988
Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells
Pasaogullari, U., & Wang, C.-Y. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.04.027 · Cited by 518
Two‐phase flow model of the cathode of PEM fuel cells using interdigitated flow fields
He, W., Yi, J. S., & Van Nguyen, T. (2000) · AIChE Journal · doi:10.1002/aic.690461016 · Cited by 502
Effects of Microporous Layers in Polymer Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1861194 · Cited by 487
Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell
Lim, C., & Wang, C. Y. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.04.009 · Cited by 444
Paganin, V. A., Ticianelli, E. A., & Gonzalez, E. R. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00242099 · Cited by 437
Effect of PTFE contents in the gas diffusion media on the performance of PEMFC
Park, G.-G., Sohn, Y.-J., Yang, T.-H., Yoon, Y.-G., Lee, W.-Y., & Kim, C.-S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.037 · Cited by 390
Improvement of water management by a microporous sublayer for PEM fuel cells
Qi, Z., & Kaufman, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00058-7 · Cited by 371
Characterization of gas diffusion layers for PEMFC
Han, M., Xu, J. H., Chan, S. H., & Jiang, S. P. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.02.057 · Cited by 363
Characterization of Gas Diffusion Layers for PEMFC
Williams, M. V., Begg, E., Bonville, L., Kunz, H. R., & Fenton, J. M. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1764779 · Cited by 330
Diffusion layer parameters influencing optimal fuel cell performance
Jordan, L. R., Shukla, A. K., Behrsing, T., Avery, N. R., Muddle, B. C., & Forsyth, M. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00489-9 · Cited by 319
Giorgi, L., Antolini, E., Pozio, A., & Passalacqua, E. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00125-x · Cited by 304
Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell
Natarajan, D., & Van Nguyen, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00624-9 · Cited by 298
Lin, G., He, W., & Van Nguyen, T. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1808633 · Cited by 229
Self-citationSong, J. M., Cha, S. Y., & Lee, W. M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00629-7 · Cited by 223
A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC
Lee, H.-K., Park, J.-H., Kim, D.-Y., & Lee, T.-H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.039 · Cited by 215
Novel gas diffusion layer with water management function for PEMFC
Chen, J., Matsuura, T., & Hori, M. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.01.007 · Cited by 199
Diagnostic tool to detect electrode flooding in proton‐exchange‐membrane fuel cells
He, W., Lin, G., & Van Nguyen, T. (2003) · AIChE Journal · doi:10.1002/aic.690491221 · Cited by 171
Self-citationPassalacqua, E., Squadrito, G., Lufrano, F., Patti, A., & Giorgi, L. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1017547112282 · Cited by 160
Bevers, D., Rogers, R. D., & von Bradke, M. (1996) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02465-2 · Cited by 141
Enhancement of PEM fuel cell performance by steaming or boiling the electrode
Qi, Z., & Kaufman, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00060-5 · Cited by 140
Jordan, L. R., Shukla, A., Behrsing, T., Avery, N. R., Muddle, B. C., & Forsyth, M. (2000) · Journal of Applied Electrochemistry · doi:10.1023/a:1004088402496 · Cited by 130
Antolini, E., Passos, R. R., & Ticianelli, E. A. (2002) · Journal of Applied Electrochemistry · doi:10.1023/a:1016329820273 · Cited by 82
Influence of electrodic properties on water management in a solid polymer electrolyte fuel cell
Staiti, P., Połtarzewski, Z., Alderucci, V., Maggio, G., Giordano, N., & Fasulo, A. (1992) · Journal of Applied Electrochemistry · doi:10.1007/bf01092616 · Cited by 44
Comparison of Electrode Backing Materials for Polymer Electrolyte Membrane Fuel Cells
Sasikumar, G., & Ryu, H. J. (2003) · Journal of the Korean Electrochemical Society · doi:10.5229/jkes.2003.6.3.183 · Cited by 3
Cited by
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Advanced Architectures and Relatives of Air Electrodes in Zn–Air Batteries
Pan, J., Xu, Y. Y., Yang, H., Dong, Z., Liu, H., & Xia, B. Y. (2018) · Advanced Science · doi:10.1002/advs.201700691 · Cited by 848
A review of gas diffusion layer in PEM fuel cells: Materials and designs
Park, S., Lee, J.-W., & Popov, B. N. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.12.148 · Cited by 560
Gas diffusion layer for proton exchange membrane fuel cells—A review
Cindrella, L., Kannan, A. M., Lin, J. F., Saminathan, K., Ho, Y., Lin, C. W., & Wertz, J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.04.005 · Cited by 557
Surface/interface nanoengineering for rechargeable Zn–air batteries
Zhou, T., Zhang, N., Wu, C., & Xie, Y. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03634b · Cited by 501
Metadata
- Authors
- Lin, G., & Nguyen, T. V.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 10
- Pages
- A1942
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2031370048
- Cited by
- 307
- References
- 26
- FWCI
- 15.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.