The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Methods to Advance Technology of Proton Exchange Membrane Fuel Cells
Open accessAbstract
Proton exchange membrane (PEM) fuel cells showing promise of a high level of performance have, up to the present time, used electrodes containing a high platinum loading (4 mg/cm 2 ). We report improvements in performance of PEM fuel cells utilizing electrodes with only one‐tenth of this platinum loading by ( i ) extension of the three‐dimensional reaction zone by incorporation of a proton conductor (Nafion) into the electrode structure; ( ii ) optimization of the amount of Nafion impregnated into the electrode structure; ( iii ) hot‐pressing the impregnated electrodes to the Nafion membrane at 120°C and 50 atm; ( iv ) optimal humidification of reactant gases at a temperature above that of the cell (5°C for or air and 10°–15°C for ); and ( v ) operation at elevated temperatures and pressures. The performance of the cells was analyzed from measurements of cell potential vs. current density and of cell potential at constant current density vs. time. Cyclic voltammetry proved to be a useful tool to ascertain the electrochemically active area of the electrodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrode materials and processes for energy conversion and storage
Srinivasan, S. G., Wagner, S., & Wroblowa, H. S. (1987) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 132
Self-citation
Cited by
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Support materials for PEMFC and DMFC electrocatalysts—A review
Sharma, S., & Pollet, B. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.011 · Cited by 1,206
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000
Costamagna, P., & Srinivasan, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00808-4 · Cited by 1,088
Self-citation
Metadata
- Authors
- Ticianelli, E. A., Derouin, C. R., Redondo, A., & Srinivasan, S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1988-09-01
- Volume
- 135
- Issue
- 9
- Pages
- 2209-2214
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2030891843
- Cited by
- 561
- References
- 1
- FWCI
- 1.93
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.