The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Methods to Advance Technology of Proton Exchange Membrane Fuel Cells
Open accessAbstract
Proton exchange membrane (PEM) fuel cells showing promise of a high level of performance have, up to the present time, used electrodes containing a high platinum loading (4 mg/cm 2 ). We report improvements in performance of PEM fuel cells utilizing electrodes with only one‐tenth of this platinum loading by ( i ) extension of the three‐dimensional reaction zone by incorporation of a proton conductor (Nafion) into the electrode structure; ( ii ) optimization of the amount of Nafion impregnated into the electrode structure; ( iii ) hot‐pressing the impregnated electrodes to the Nafion membrane at 120°C and 50 atm; ( iv ) optimal humidification of reactant gases at a temperature above that of the cell (5°C for or air and 10°–15°C for ); and ( v ) operation at elevated temperatures and pressures. The performance of the cells was analyzed from measurements of cell potential vs. current density and of cell potential at constant current density vs. time. Cyclic voltammetry proved to be a useful tool to ascertain the electrochemically active area of the electrodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrode materials and processes for energy conversion and storage
Srinivasan, S. G., Wagner, S., & Wroblowa, H. S. (1987) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 132
Self-citation
Cited by
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Support materials for PEMFC and DMFC electrocatalysts—A review
Sharma, S., & Pollet, B. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.011 · Cited by 1,206
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000
Costamagna, P., & Srinivasan, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00808-4 · Cited by 1,088
Self-citationThin-film catalyst layers for polymer electrolyte fuel cell electrodes
Wilson, M. S., & Gottesfeld, S. (1992) · Journal of Applied Electrochemistry · doi:10.1007/bf01093004 · Cited by 871
Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte
Bernardi, D. M., & Verbrugge, M. W. (1991) · AIChE Journal · doi:10.1002/aic.690370805 · Cited by 851
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000
Costamagna, P., & Srinivasan, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00807-2 · Cited by 807
Self-citationModeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Three-dimensional computational analysis of transport phenomena in a PEM fuel cell
Berning, T., Lu, D. M., & Djilali, N. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01057-6 · Cited by 711
Jaouen, F., Herranz, J., Lefèvre, M., Dodelet, J.-P., Kramm, U. I., Herrmann, I., Bogdanoff, P., Maruyama, J., Nagaoka, T., Garsuch, A., et al. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900219g · Cited by 704
Liu, Z., Lin, X., Lee, J. Y., Zhang, W., Han, M., & Gan, L. M. (2002) · Langmuir · doi:10.1021/la0116903 · Cited by 547
A Historical Perspective of Fuel Cell Technology in the 20th Century
Perry, M. L., & Fuller, T. F. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1488651 · Cited by 491
PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode
Tang, H., Qi, Z., Ramani, M., & Elter, J. F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.059 · Cited by 488
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Polymer Electrolyte Fuel Cells
Gottesfeld, S., & Zawodzinski, T. A. (1997) · Advances in Electrochemical Sciences and Engineering · doi:10.1002/9783527616794.ch4 · Cited by 477
Passalacqua, E., Lufrano, F., Squadrito, G., Patti, A., & Giorgi, L. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00679-4 · Cited by 440
Paganin, V. A., Ticianelli, E. A., & Gonzalez, E. R. (1996) · Journal of Applied Electrochemistry · doi:10.1007/bf00242099 · Cited by 437
Self-citationAntonucci, P. L., Aricò, A. S., Cretı̀, P., Ramunni, E., & Antonucci, V (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00206-4 · Cited by 436
Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC
Antolini, E., Giorgi, L., Pozio, A., & Passalacqua, E. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00186-4 · Cited by 433
Electrocatalysis in water electrolysis with solid polymer electrolyte
Rasten, E., Hagen, G., & Tunold, R. (2003) · Electrochimica Acta · doi:10.1016/j.electacta.2003.04.001 · Cited by 420
Effects of Nafion impregnation on performances of PEMFC electrodes
Lee, S. J., Mukerjee, S., McBreen, J., Rho, Y. W., Kho, Y. T., & Lee, T. H. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00127-3 · Cited by 397
Nafion® 115/zirconium phosphate composite membranes for operation of PEMFCs above 100°C
Costamagna, P., Yang, C., Bocarsly, A. B., & Srinivasan, S. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00829-5 · Cited by 390
Self-citationSun, W., Peppley, B. A., & Karan, K. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2004.12.009 · Cited by 379
Xie, J., Wood, D. L., More, K. L., Atanassov, P., & Borup, R. L. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1873492 · Cited by 370
BROKA, K., & EKDUNGE, P. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018469520562 · Cited by 360
Nafion/PTFE composite membranes for fuel cell applications
Liu, F., Yi, B., Xing, D., Yu, J., & Zhang, H. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00503-3 · Cited by 328
Berning, T., & Djilali, N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00816-4 · Cited by 317
Carbon-supported Pt nanoparticles as catalysts for proton exchange membrane fuel cells
Liu, Z., Gan, L. M., Hong, L., Chen, W., & Lee, J. Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.07.012 · Cited by 305
RETRACTED: Review of proton exchange membrane fuel cell models
Bıyıkoğlu, A. (2005) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2005.05.010 · Cited by 305
RetractedGiorgi, L., Antolini, E., Pozio, A., & Passalacqua, E. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00125-x · Cited by 304
Rigorous 3-D Mathematical Modeling of PEM Fuel Cells
Mazumder, S., & Cole, J. V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1615608 · Cited by 297
Absorption, Desorption, and Transport of Water in Polymer Electrolyte Membranes for Fuel Cells
Ge, S., Li, X., Yi, B., & Hsing, I.-M. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1899263 · Cited by 288
Rigorous 3-D Mathematical Modeling of PEM Fuel Cells
Mazumder, S., & Cole, J. V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1615609 · Cited by 286
Modeling Two-Phase Behavior in PEFCs
Weber, A. Z., Darling, R. M., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1792891 · Cited by 285
Investigation of Mass-Transport Limitations in the Solid Polymer Fuel Cell Cathode
Jaouen, F., Lindbergh, G., & Sundholm, G. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1456916 · Cited by 275
Low Pt loading high performance cathodes for PEM fuel cells
Qi, Z., & Kaufman, A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00477-9 · Cited by 273
Vinayan, B. P., Nagar, R., Rajalakshmi, N., & Ramaprabhu, S. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102544 · Cited by 265
Review and comparison of approaches to proton exchange membrane fuel cell modeling
Cheddie, D., & Munroe, N. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.003 · Cited by 262
New fluorinated functional materials
Pagliaro, M., & Ciriminna, R. (2005) · Journal of Materials Chemistry · doi:10.1039/b507583c · Cited by 255
Modelling the PEM fuel cell cathode
BROKA, K., & EKDUNGE, P. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018476612810 · Cited by 243
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Kim, T.-H., Yi, J.-Y., Jung, C.-Y., Jeong, E., & Yi, S.-C. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.12.015 · Cited by 127
Effect of dispersion solvent in catalyst ink on proton exchange membrane fuel cell performance
Huang, D.-C., Yu, P.-J., Liu, F.-J., Huang, S.-L., Hsueh, K.-L., Chen, Y.-C., Wu, C.-H., Chang, W.-C., & Tsau, F.-H. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18202-2 · Cited by 93
Zamel, N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.091 · Cited by 93
Wang, G., Zou, L., Huang, Q., Zou, Z., & Yang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12382a · Cited by 81
Fuel cell catalyst layers containing short-side-chain perfluorosulfonic acid ionomers
Peron, J., Edwards, D., Haldane, M., Luo, X., Zhang, Y., Holdcroft, S., & Shi, Z. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.050 · Cited by 77
Dispersion-Solvent Control of Ionomer Aggregation in a Polymer Electrolyte Membrane Fuel Cell
Lee, J. H., Doo, G., Kwon, S. H., Choi, S., Kim, H.-T., & Lee, S. G. (2018) · Scientific Reports · doi:10.1038/s41598-018-28779-y · Cited by 74
Effects of membrane electrode assembly components on proton exchange membrane fuel cell performance
BAYRAKCEKEN, A., ERKAN, S., TURKER, L., & EROGLU, I. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.08.021 · Cited by 64
Chisaka, M., & Daiguji, H. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.01.018 · Cited by 52
Performance of a direct methanol fuel cell (DMFC) at low temperature: cathode optimization
Reshetenko, T. V., Kim, H.-T., Lee, H., Jang, M., & Kweon, H.-J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.058 · Cited by 47
The effect of the anode loading and method of MEA fabrication on DMFC performance
Reshetenko, T. V., Kim, H. ‐., Krewer, U., & Kweon, H. ‐. (2007) · Fuel Cells · doi:10.1002/fuce.200600030 · Cited by 46
Effect of catalytic ink on sub-freezing endurance of PEMFCs
Song, W., Yu, H., Hao, L., Yi, B., & Shao, Z. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.07.041 · Cited by 20
Sabli, N., Abu Bakar, N. A., Izhar, S., & Hilal, H. S. (2019) · Sains Malaysiana · doi:10.17576/jsm-2019-4804-20 · Cited by 5
Metadata
- Authors
- Ticianelli, E. A., Derouin, C. R., Redondo, A., & Srinivasan, S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1988-09-01
- Volume
- 135
- Issue
- 9
- Pages
- 2209-2214
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2030891843
- Cited by
- 561
- References
- 1
- FWCI
- 1.93
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.