The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal Analysis of Spirally Wound Lithium Batteries
Open accessAbstract
A two-dimensional thermal model is developed to establish a standard for the simulation of spirally wound cells. It properly deals with the geometric characteristics and the boundary conditions to avoid the distorted simulation results due to improper approximation of the spiral geometry. Furthermore, the flexible architecture makes it possible that the precision of the numerical solutions can be elevated by spending more time on calculation. According to the simulation of lithium batteries under natural convection, the hottest temperatures are in a circular region near the liquid-filled hollow core but not at the exact center. Furthermore, radiation contributes as much as 53.6% to the heat dissipation if the surface emissivity approaches unity. Adopting an air flow parallel to the cylinder axis is effective to suppress the surface temperature, but the hottest temperature inside a battery remains high if a battery has a large radius. The heat dissipation rate of an air flow perpendicular to the cylinder axis is slightly lower than that of a parallel flow, and a battery case with high thermal conductivity is suggested to maintain the temperature uniformity of a battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Cited by
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
A Review of Battery Fires in Electric Vehicles
Sun, P., Bisschop, R., Niu, H., & Huang, X. (2020) · Fire Technology · doi:10.1007/s10694-019-00944-3 · Cited by 891
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
Yang, N., Zhang, X., Shang, B., & Li, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.079 · Cited by 378
Guo, G., Long, B., Cheng, B., Zhou, S., Xu, P., & Cao, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.090 · Cited by 322
On state-of-charge determination for lithium-ion batteries
Li, Z., Huang, J., Liaw, B. Y., & Zhang, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.001 · Cited by 317
Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell
Saw, L. H., Ye, Y., & Tay, A. A. O. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.040 · Cited by 275
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Spinner, N. S., Love, C. T., Rose-Pehrsson, S. L., & Tuttle, S. G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.06.003 · Cited by 118
Metadata
- Authors
- Chen, S.-C., Wang, Y.-Y., & Wan, C.-C.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2006
- Volume
- 153
- Issue
- 4
- Pages
- A637
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2034763632
- Cited by
- 191
- References
- 1
- FWCI
- 2.81
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.