Ohmic Resistance Measurement of Bubble Froth Layer in Water Electrolysis under Microgravity
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Galvanostatic water electrolysis was conducted in 2 wt % KOH and 0.1 N H 2 SO 4 solutions under microgravity. The corresponding terrestrial experiments employed two kinds of electrode configurations: a vertical cathode and downward-facing horizontal cathode-over-anode (C/A) arrangement. The latter configuration was designed to simulate the microgravity ( μ - G ) condition. The ohmic resistance of the gas bubble dispersion zone near Pt electrodes was measured by the current interrupter method and compared for these three different cases. The transient variation of resistance for C/A configuration behaved similarly to that under μ - G in H 2 SO 4 , but the resistance varied more slowly in KOH . When water electrolysis was conducted with a vertical plane cathode under 1 - G , the resistance reached an essentially constant value within a few 100 ms in KOH , whereas the resistance increased linearly for a few seconds, followed by a zig-zag variation in H 2 SO 4 . Water electrolysis under μ - G resulted in stable froth layer formation, and the accompanying ohmic resistance increased in linear proportion to the froth layer thickness. The contributions of electrode surface coverage by bubbles and electrolyte-phase bubble void fraction to the ohmic drop were also assessed. These parameters were compared with corresponding values in terrestrial experiments analyzed by Balzer and Vogt.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Potential drops due to an attached bubble on a gas-evolving electrode
Gabrielli, C., Huet, F., Keddam, M., Macias, A., & Sahar, A. (1989) · Journal of Applied Electrochemistry · doi:10.1007/bf01320636 · Cited by 131
Cited by
Recent progress in alkaline water electrolysis for hydrogen production and applications
Zeng, K., & Zhang, D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.002 · Cited by 3,611
The intensification technologies to water electrolysis for hydrogen production – A review
Wang, M., Wang, Z., Gong, X., & Guo, Z. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.090 · Cited by 1,011
Darband, G. B., Aliofkhazraei, M., & Shanmugam, S. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109300 · Cited by 383
Recent Advances in Magnetic Field-Enhanced Electrocatalysis
Zhang, Y., Liang, C., Wu, J., Liu, H., Zhang, B., Jiang, Z., Li, S., & Xu, P. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c02104 · Cited by 273
Electrochemistry in Magnetic Fields
Luo, S., Elouarzaki, K., & Xu, Z. J. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202203564 · Cited by 268
Metadata
- Authors
- Kiuchi, D., Matsushima, H., Fukunaka, Y., & Kuribayashi, K.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2006
- Volume
- 153
- Issue
- 8
- Pages
- E138
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2042413122
- Cited by
- 124
- References
- 1
- FWCI
- 2.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ohmic Resistance Measurement of Bubble Froth Layer in Water Electrolysis under Microgravity. https://app.cochat.ai/papers/10.1149/1.2207008
- The paper
- Kiuchi, D., Matsushima, H., Fukunaka, Y., & Kuribayashi, K. (2006). Ohmic Resistance Measurement of Bubble Froth Layer in Water Electrolysis under Microgravity. Journal of The Electrochemical Society. https://doi.org/10.1149/1.2207008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.