DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols
The DOI matches its Crossref record.
Abstract
Fuel cells, especially those for transportation applications, must operate over a wide range of operating and cycling conditions. The desired operating range encompasses temperatures from well below the freezing point to well above the boiling point of water, relative humidity from ambient to saturated, and half-cell potentials from 0 to >1.5 V. Furthermore, the anode may be exposed to both hydrogen and air during different parts of the driving and start/stop cycles. Transportation fuel cell operation is greatly exacerbated by the transient and cyclic nature of the operating conditions. The cell/stack conditions cycle, sometimes quite rapidly, between high and low voltage, temperature, humidity, and gas composition. The cycling results in physical and chemical changes to components, sometimes with catastrophic results. This document describes DOE durability targets and the status of current fuel cell technology as well as accelerated stress test (AST) protocols to assess the performance and durability of PEM fuel cell components.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A catalyst durability test protocol (accelerated stress test; AST) based on published fuel cell cathode durability testing was applied.25,26”
From Effect of Solvent Ratio (Ethylene Glycol/Water) in the Synthesis of Pt/C Cathode Catalysts on PEM Fuel Cell Performance (2024) · cites this paper as [25]
Citations
Cites
Still being checked.
Cited by
Items 101–165 of 165
PEM Fuel Cell Materials: Costs, Performance, and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2018) · Springer eBooks · doi:10.1007/978-1-4939-7789-5_152 · Cited by 12
Chen, Y., Bahrami, M., Kumar, N., Orfino, F. P., Dutta, M., Lauritzen, M. V., Alvar, E. N., Setzler, E., Agapov, A. L., & Kjeang, E. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237627 · Cited by 13
Application relevant load cycles for PEMFC component development and hybrid system optimization
Sánchez-Monreal, J., Mitzel, J., Vacquier, C., & Gazdzicki, P. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.120604 · Cited by 12
Recent Progress on Durable Metal‐N‐C Catalysts for Proton Exchange Membrane Fuel Cells
Wu, H., Chen, M., Li, W., & Lu, B. (2023) · Chemistry - An Asian Journal · doi:10.1002/asia.202300862 · Cited by 11
Carbon corrosion in low-temperature CO 2 electrolysis systems
Ferrell, J. R., Rasmussen, M. J., & McNeary, W. W. (2024) · Sustainable Energy & Fuels · doi:10.1039/d4se00594e · Cited by 11
Pan, Y., Wang, H., & Brandon, N. P. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235574 · Cited by 10
Degradation of Pt/C catalysts in start-stop cycling tests
Gribov, E. N., Kuznetzov, A. N., Golovin, V. A., Voropaev, I. N., Romanenko, A. V., & Okunev, A. G. (2014) · Russian Journal of Electrochemistry · doi:10.1134/s1023193514070052 · Cited by 10
Rapid and Flash Tests: Indicator for Quality of HT‐PEM Fuel Cells Batches?
Rastedt, M., Büsselmann, J., Tullius, V., Wagner, P., & Dyck, A. (2018) · Fuel Cells · doi:10.1002/fuce.201700177 · Cited by 9
On/off cycling test of low-temperature PEM fuel cell at fully humidified conditions
Novotný, P., Tomáš, M., Němec, T., Kullová, L., & Maršík, F. (2019) · International Journal of Green Energy · doi:10.1080/15435075.2019.1671394 · Cited by 9
Chen, F., Zhang, J., Pei, Y., Chi, X., Zhang, H., & Wang, Y. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.349 · Cited by 8
Influence of cycle repetition on stack voltage degradation during fuel cell stress tests
Yeetsorn, R., Petrone, R., Hissel, D., Harel, F., Breaz, E., Gao, F., & Péra, M. (2022) · Fuel Cells · doi:10.1002/fuce.202200027 · Cited by 8
Photometric Method to Determine Membrane Degradation in Polymer Electrolyte Fuel Cells
Heidinger, M., Kuhnert, E., Mayer, K., Sandu, D., Hacker, V., & Bodner, M. (2023) · Energies · doi:10.3390/en16041957 · Cited by 8
Abdollahi, F., Malek, K., Kadyk, T., Kulyk, N., Gerling, C., & Eikerling, M. H. (2026) · Fuel Cells · doi:10.1002/fuce.70068 · Cited by 7
Rogler, M., Wagner, R. A., Thiele, S., & Suermann, M. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.145360 · Cited by 8
Németh, T., Han, Z., & Gubler, L. (2024) · Membranes · doi:10.3390/membranes14120263 · Cited by 7
Eppler, M., Hanauer, M., Berner, U., Leduc, V., Kadyk, T., & Eikerling, M. H. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/add182 · Cited by 8
Fuel cell durability under automotive driving cycles—fundamentals and experiments
Zhao, J. F., & Li, X. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99485-9.00004-6 · Cited by 8
Wang, Y., & Chu, T. (2024) · Frontiers in Energy · doi:10.1007/s11708-024-0955-3 · Cited by 6
Zuo, J., Cadet, C., Li, Z., Bérenguer, C., & Outbib, R. (2021) · Annual Reliability and Maintainability Symposium (RAMS) · doi:10.1109/rams48097.2021.9605719 · Cited by 7
Bahrami, M., Kumar, N., Chen, Y., Lowe, O. C., Orfino, F. P., Dutta, M., Lauritzen, M. V., Setzler, E., Agapov, A. L., & Kjeang, E. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238268 · Cited by 7
PEM Fuel Cell Materials: Costs, Performance and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2017) · Springer eBooks · doi:10.1007/978-1-4939-2493-6_152-3 · Cited by 6
Mirfarsi, S. H., Kumar, A., Ma, D., Wong, R., Jones, S., McDermid, S., Baker, A. M., Britton, B., & Kjeang, E. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238928 · Cited by 5
Rogler, M., Bierling, M., Finger, S. M., Fritsch, B., Igel, C. S., Milosevic, M., Wagner, R. A., Hutzler, A., Cherevko, S., Thiele, S., et al. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae32b8 · Cited by 5
Potsi, G., Tsai, Y.-H. J., Reese, A. J., Yoon, D., Hitt, J. L., Kouloumpis, Α., Suntivich, J., Muller, D. A., Mallouk, T. E., & Giannelis, E. P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c01935 · Cited by 4
Kravos, A., Voglar, T., Kregar, A., & Katrašnik, T. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad07a7 · Cited by 4
Xuan, L., Mei, D., Zhang, H., Zhou, H., & Wang, Y. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.09.074 · Cited by 4
FUEL CELLS – PROTON-EXCHANGE MEMBRANE FUEL CELLS | Life-Limiting Considerations
Wu, J., Yuan, X. Z., Martin, J. J., & Wang, H. (2009) · Elsevier eBooks · doi:10.1016/b978-044452745-5.00894-7 · Cited by 4
Electrocatalyst Degradation in High Temperature PEM Fuel Cells
Valle, F., Micheli, D., Thesis, Taccani, R., Amenitsch, H. W., & Marmiroli, B. (2014) · OpenstarTs (Univeristy of Trieste https://www.units.it/) · Cited by 15
Martini, V., Mocera, F., & Somà, A. (2025) · Energy · doi:10.1016/j.energy.2025.139331 · Cited by 3
Sannemüller, H., Liepold, H., Brendel, F., Friese, J., Klose, C., de Wild, T., & Münchinger, A. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202526133 · Cited by 4
Allerston, L. K., Hodgson, D., Gibbs, C., Brett, D. J. L., & Rees, N. V. (2020) · Electroanalysis · doi:10.1002/elan.202060291 · Cited by 3
High‐Performance Chemically Regenerative Redox Fuel Cells Using a NO3−/NO Regeneration Reaction
Han, S., Kwak, D., Park, H. S., Choi, I., Park, J., Kim, S., Kim, M., Hong, S., & Park, K. (2017) · Angewandte Chemie · doi:10.1002/ange.201610738 · Cited by 3
Narayanan, H., & Basu, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.03.129 · Cited by 3
Böhm, D., Mangoufis-Giasin, I., Mirzayeva, F., Vajic, Z., Hoeft, H., Hengge, K., Jurzinsky, T., Burger, T., & El-Sayed, H. A. (2024) · Journal of the Electrochemical Society · doi:10.1149/1945-7111/ad417e · Cited by 2
Stress testing of PEM fuel cell membranes
Igwe, C. I. (2025) · Journal of Umm Al-Qura University for Engineering and Architecture · doi:10.1007/s43995-025-00258-2 · Cited by 4
Rabissi, C., Zago, M., Bresciani, F., Gazdzicki, P., & Casalegno, A. (2023) · Energies · doi:10.3390/en16073226 · Cited by 2
Agrawal, K., & Santhanam, V. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.10.185 · Cited by 2
Fuel Cell Membrane Durability Implications of Locally Absent Microporous Layer
Chen, Y., Kumar, N., Bahrami, M., Orfino, F. P., Dutta, M., Lauritzen, M. V., Alvar, E. N., Setzler, E., Agapov, A. L., & Kjeang, E. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae02f4 · Cited by 2
Vapor Delivery Systems for the Study of the Effects of Reformate Gas Impurities in HT-PEM Fuel Cells
Araya, S. S., Kær, S. K., & Andreasen, S. J. (2011) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4005123 · Cited by 2
Uchiyama, T. (2014) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.87.236 · Cited by 2
May, J. A. (2014) · VTechWorks (Virginia Tech) · Cited by 3
García‐Salaberri, P. A., Zenyuk, I. V., Gostick, J. T., & Weber, A. Z. (2020) · ECS Meeting Abstracts · doi:10.1149/ma2020-01381606mtgabs · Cited by 2
Grignon, M., Jaafar, A., Turpin, C., Rakotondrainibé, A., Guenot, B., & Soyez, E. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.10.267 · Cited by 1
Rajasekar, S., Tremblay, C. W., & Holdcroft, S. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.241228 · Cited by 1
Proton Exchange Membrane Fuel Cell Testing
Martin, J. J. (2011) · CRC Press eBooks · doi:10.1201/b11100-3 · Cited by 1
PEM Fuel Cell Materials: Costs, Performance and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2012) · Springer eBooks · doi:10.1007/978-1-4419-0851-3_152 · Cited by 7
Study of the degradations induced by start-up/shut-down operations in PEMFC
Lamibrac, A. (2013) · theses.fr (ABES) · doi:10.70675/de630ddbza725z498ez968fzaace116bf61f · Cited by 11
Functionalized carbon materials for high performances of PEM fuel cells
Xia, Y. (2014) · theses.fr (ABES) · doi:10.70675/da9a62c7z6a76z450az93d4za38a7130da0c · Cited by 1
Alkaline fuel cell using direct hydrazine-borane
Zadick, A. (2016) · theses.fr (ABES) · doi:10.70675/d4c34b5eze45cz4ac4z8d99z72f5c3922e64
Chen, Y. (2020) · Summit (Simon Fraser University)
Analysis of Hydrogen Fuel Cell Powerplant Architectures for Future Transport Applications
Lopez-Juarez, M. (2022) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/189212
Contribution au pronostic de durée de vie des systèmes piles à combustible PEMFC
Sanchez, R. E. S. (2015) · theses.fr (ABES) · doi:10.70675/af108571zfbe7z429az88bez00b71279cecf
Designing an Accelerated Stress Test for Proton Exchange Membrane Fuel Cell StackPreprint
Rafei, T. A., Steiner, N. Y., Pahon, E., & Hissel, D. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4808997
Fuel Cells – Polymer-Electrolyte Membrane Fuel Cell | Life Limitations
Sethuraman, V. A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-96022-9.00300-5
Study of constant current and ripple current aging of LT-PEMFC stacks
Capdeville, G., Jaafar, A., Lacressonnière, F., Turpin, C., Jarry, T., Soyez, E., Henrard, P., Kreczanik, P., Rakotondrainibé, A., Spinosa, M., et al. (2025) · International Conference on Control, Decision and Information Technologies (CoDIT) · doi:10.1109/codit66093.2025.11321575
Evaluation of real drive data of a refuse fuel cell truck
Eurén, H. (2023) · KTH Publication Database DiVA (KTH Royal Institute of Technology)
Polydopamine coated platinum catalysts to improve fuel cells durability
Mugeni, A. M. (2022) · UWC Research Repository (University of the Western Cape)
Design and Implementation of Novel Carbon Materials for the Oxygen Reduction Reaction
Wang, H. (2023) · eScholarship (California Digital Library)
Taleb, S. A. H. (2019) · theses.fr (ABES) · doi:10.70675/5a29c0dbzf0a1z4dbaz9b4fz0d37bf1a06f2 · Cited by 2
Sheng, W., Xing, Y., Yang, F., Cao, J., Wang, Y., & Zhang, X. (2026) · Journal of Polymer Research · doi:10.1007/s10965-026-05165-1
Chen, Y., Orfino, F. P., Boyd, M. J., Waldecker, J. R., & Kjeang, E. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.156412
Yang, K., Ni, L., Gomes, L., Geer, C., Wang, C., Liu, E., Dai, H., Drisdell, W. S., Friedman, A., Kramm, U. I., et al. (2026) · ACS Catalysis · doi:10.1021/acscatal.6c03154
CHEETA aircraft sizing, performance, and sensitivity
Waddington, E. (2022) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign)
Carré, B., Karaman, B., Deckers, Z., Servais, T., Léonard, A. F., & Job, N. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.6c01489
Ahluwalia, R., Wang, X., Hu, L., Chen, K., Quesada, C. M., Young, E., Cleve, T. V., Wang, X., Spendelow, J. S., Neyerlin, K. C., et al. (2026) · Electrochem · doi:10.3390/electrochem7040033
Metadata
- Authors
- Garland, N., Benjamin, T., & Kopasz, J.
- Affiliations
- United States Department of Energy (US)
- Argonne National Laboratory (US)
- Venue
- ECS Transactions
- Publisher
- The Electrochemical Society
- Published
- 2007-09-28
- Volume
- 11
- Issue
- 1
- Pages
- 923-931
- ISSN
- 1938-5862 (ISSN-L)
- 1938-6737
- OpenAlex
- W2313173723
- Cited by
- 153
- References
- 0
- Citations by year
- 2026: 6 · 2025: 18 · 2024: 17 · 2023: 17 · 2022: 9 · 2021: 14 · 2020: 6 · 2019: 11 · 2018: 11 · 2017: 8 · 2016: 3 · 2015: 4 · 2014: 10 · 2013: 1 · 2012: 10
- FWCI
- 1.51
- Type
- conference paper
- Language
- en
- Open access
- closed
- Licence
- iopscience.iop.org/page/copyright (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Locations
- ECS Transactions (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Keywords
- fuel cell durability, proton exchange membrane fuel cells, accelerated stress testing, transportation fuel cells, cycling conditions, operating temperature range, relative humidity, half-cell potential, anode degradation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.