DOE Fuel Cell Program: Durability Technical Targets and Testing Protocols
The DOI matches its Crossref record.
Abstract
Fuel cells, especially those for transportation applications, must operate over a wide range of operating and cycling conditions. The desired operating range encompasses temperatures from well below the freezing point to well above the boiling point of water, relative humidity from ambient to saturated, and half-cell potentials from 0 to >1.5 V. Furthermore, the anode may be exposed to both hydrogen and air during different parts of the driving and start/stop cycles. Transportation fuel cell operation is greatly exacerbated by the transient and cyclic nature of the operating conditions. The cell/stack conditions cycle, sometimes quite rapidly, between high and low voltage, temperature, humidity, and gas composition. The cycling results in physical and chemical changes to components, sometimes with catastrophic results. This document describes DOE durability targets and the status of current fuel cell technology as well as accelerated stress test (AST) protocols to assess the performance and durability of PEM fuel cell components.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A catalyst durability test protocol (accelerated stress test; AST) based on published fuel cell cathode durability testing was applied.25,26”
From Effect of Solvent Ratio (Ethylene Glycol/Water) in the Synthesis of Pt/C Cathode Catalysts on PEM Fuel Cell Performance (2024) · cites this paper as [25]
Citations
Cites
Still being checked.
Cited by
İnci, M., Büyük, M., Demir, M. H., & İlbey, G. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110648 · Cited by 548
A review of accelerated stress tests of MEA durability in PEM fuel cells
ZHANG, S., YUAN, X., WANG, H., MERIDA, W., ZHU, H., SHEN, J., WU, S., & ZHANG, J. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.10.012 · Cited by 525
A comprehensive review of PBI-based high temperature PEM fuel cells
Araya, S. S., Zhou, F., Liso, V., Sahlin, S. L., Vang, J. R., Thomas, S., Gao, X., Jeppesen, C., & Kær, S. K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.09.024 · Cited by 463
Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane
Liu, X., Li, Y., Xue, J., Zhu, W., Zhang, J., Yin, Y., Qin, Y., Jiao, K., Du, Q., Cheng, B., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08622-2 · Cited by 465
Zhao, J., & Li, X. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112022 · Cited by 430
A review of polymer electrolyte membrane fuel cell durability test protocols
Yuan, X.-Z., Li, H., Zhang, S., Martin, J., & Wang, H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.082 · Cited by 354
Carbon Corrosion in PEM Fuel Cells and the Development of Accelerated Stress Tests
Macauley, N., Papadias, D. D., Fairweather, J., Spernjak, D., Langlois, D., Ahluwalia, R., More, K. L., Mukundan, R., & Borup, R. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0061806jes · Cited by 341
Park, J., Oh, H., Ha, T., Lee, Y. I., & Min, K. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.06.068 · Cited by 331
Palladium alloys used as electrocatalysts for the oxygen reduction reaction
Wang, T., Chutia, A., Brett, D. J. L., Shearing, P. R., He, G., Chai, G., & Parkin, I. P. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03915b · Cited by 322
Lim, C., Ghassemzadeh, L., Van Hove, F., Lauritzen, M., Kolodziej, J., Wang, G. G., Holdcroft, S., & Kjeang, E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.106 · Cited by 258
Development and application of fuel cells in the automobile industry
Luo, Y., Wu, Y., Li, B., Mo, T., Li, Y., Feng, S.-P., Qu, J., & Chu, P. K. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103124 · Cited by 230
A review of durability test protocols of the proton exchange membrane fuel cells for vehicle
Chen, H., Song, Z., Zhao, X., Zhang, T., Pei, P., & Liang, C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.050 · Cited by 216
Kumar, K., Dubau, L., Jaouen, F., & Maillard, F. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00685 · Cited by 201
System integration, durability and reliability of fuel cells: Challenges and solutions
Wang, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.083 · Cited by 185
Recent Advances in Catalyst Accelerated Stress Tests for Polymer Electrolyte Membrane Fuel Cells
Stariha, S., Macauley, N., Sneed, B. T., Langlois, D., More, K. L., Mukundan, R., & Borup, R. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0881807jes · Cited by 178
Martinez, U., Komini Babu, S., Holby, E. F., & Zelenay, P. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.04.010 · Cited by 178
Vinothkannan, M., Ramakrishnan, S., Kim, A. R., Lee, H.-K., & Yoo, D. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b18059 · Cited by 167
Zucconi, A., Hack, J., Stocker, R., Suter, T., Rettie, A. J. E., & Brett, D. J. L. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta06895a · Cited by 144
Qiao, Z., Wang, C., Zeng, Y., Spendelow, J. S., & Wu, G. (2021) · Small · doi:10.1002/smll.202006805 · Cited by 138
Wong, K. H., & Kjeang, E. (2015) · ChemSusChem · doi:10.1002/cssc.201402957 · Cited by 131
Mechanical degradation of fuel cell membranes under fatigue fracture tests
Khorasany, R. M. H., Alavijeh, A. S., Kjeang, E., Wang, G. G., & Rajapakse, R. K. N. D. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.135 · Cited by 133
Sadeghi Alavijeh, A., Goulet, M. ‐., Khorasany, R. M. H., Ghataurah, J., Lim, C., Lauritzen, M., Kjeang, E., Wang, G. G., & Rajapakse, R. K. N. D. (2015) · Fuel Cells · doi:10.1002/fuce.201400040 · Cited by 95
Baker, A. M., Wang, L., Johnson, W. B., Prasad, A. K., & Advani, S. G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5078399 · Cited by 99
Sharma, R., & Andersen, S. M. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.08.045 · Cited by 103
Degradation forecast for PEMFC cathode-catalysts under cyclic loads
Moein‐Jahromi, M., Kermani, M. J., & Movahed, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.102 · Cited by 99
Spernjak, D., Fairweather, J. D., Mukundan, R., Rockward, T., & Borup, R. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.086 · Cited by 113
Simulation of ionomer membrane fatigue under mechanical and hygrothermal loading conditions
Khorasany, R. M. H., Kjeang, E., Wang, G. G., & Rajapakse, R. K. N. D. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.133 · Cited by 96
Khattra, N. S., Karlsson, A. M., Santare, M. H., Walsh, P., & Busby, F. C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.065 · Cited by 94
Lickert, T., Fischer, S., Young, J. L., Klose, S., Franzetti, I., Hahn, D., Kang, Z., Shviro, M., Scheepers, F., Carmo, M., et al. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121898 · Cited by 93
Characterization of PEM fuel cell degradation by polarization change curves
Bezmalinović, D., Šimić, B., & Barbir, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.047 · Cited by 87
Sinniah, J. D., Wong, W. Y., Loh, K. S., Yunus, R. M., & Timmiati, S. N. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231422 · Cited by 84
Pivac, I., Bezmalinović, D., & Barbir, F. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.05.095 · Cited by 79
Jahnke, T., Futter, G. A., Baricci, A., Rabissi, C., & Casalegno, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0232001jes · Cited by 89
Kwon, T., Lim, Y., Cho, J., Lawler, R., Min, B. J., Goddard, W. A., Jang, S. S., & Kim, J. Y. (2022) · Materials Today · doi:10.1016/j.mattod.2022.06.021 · Cited by 79
Pahon, E., Hissel, D., & Steiner, N. Y. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231895 · Cited by 79
Degradation mechanisms in PEM fuel cells: A brief review
Patil, V., Reshmi, P. V., Prajna, S., Yashaswi, Yashaswini, Haleshappa, D., Jayarama, A., & Pinto, R. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.03.603 · Cited by 95
Bae, S. J., Kim, S., Park, J. I., Park, C. W., Lee, J., Song, I., Lee, N., Kim, K., & Park, J. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.03.104 · Cited by 77
Ji, S. G., Kwon, H. C., Kim, T., Sim, U., & Choi, C. H. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c01618 · Cited by 62
Lee, S. W., Choi, S. R., Jang, J.-Y., Park, G., Yu, S. H., & Park, J.-Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07941f · Cited by 58
Hooshyari, K., Horri, B. A., Abdoli, H., Vostakola, M. F., Kakavand, P., & Salarizadeh, P. (2021) · Energies · doi:10.3390/en14175440 · Cited by 60
Time-dependent mechanical response of a composite PFSA membrane
Khattra, N. S., Lu, Z., Karlsson, A. M., Santare, M. H., Busby, F. C., & Schmiedel, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.116 · Cited by 55
Diloyan, G., Sobel, M., Das, K., & Hutapea, P. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.027 · Cited by 53
Yang, D., Tan, Y., Li, B., Ming, P., Xiao, Q., & Zhang, C. (2022) · Membranes · doi:10.3390/membranes12030306 · Cited by 54
Corrosion and Materials Degradation in Electrochemical Energy Storage and Conversion Devices
Saji, V. S. (2023) · ChemElectroChem · doi:10.1002/celc.202300136 · Cited by 50
Kwon, J., Choi, P., Jo, S., Oh, H., Cho, K.-Y., Lee, Y., Kim, S., & Eom, K. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140219 · Cited by 45
Desantes, J. M., Novella, R., Plá, B., & Lopez-Juarez, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119137 · Cited by 46
Topalov, A. A., Katsounaros, I., Meier, J. C., Klemm, S. O., & Mayrhofer, K. J. J. (2011) · Review of Scientific Instruments · doi:10.1063/1.3660814 · Cited by 46
Li, Y., Hart, J. L., Taheri, M. L., & Snyder, J. D. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b02398 · Cited by 47
Proton-exchange-membrane fuel cells durability evaluated by load-on/off cycling
Janssen, G. J. M., Sitters, E. F., & Pfrang, A. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.027 · Cited by 42
Effect of load-cycling amplitude on performance degradation for proton exchange membrane fuel cell
Kun, W., Li, N., Yang, Y., Ke, S., Zhang, Z., Dou, M., & Wang, F. (2021) · Chinese Chemical Letters · doi:10.1016/j.cclet.2021.02.045 · Cited by 42
Anwar, M. T., Yan, X., Asghar, M. R., Husnain, N., Shen, S., Luo, L., & Zhang, J. (2018) · International Journal of Energy Research · doi:10.1002/er.4322 · Cited by 41
PEM Fuel Cell Materials: Costs, Performance and Durability
Bruijn, A. D. F., & Janssen, G. J. M. (2012) · Springer eBooks · doi:10.1007/978-1-4614-5785-5_9 · Cited by 44
Advancing membrane technology in organic liquids towards a sustainable future
Kim, J. H., Kim, J. F., Jiang, Z., & Livingston, A. G. (2025) · Nature Sustainability · doi:10.1038/s41893-025-01570-4 · Cited by 40
Ye, H., Favero, S., Tyrrell, H., Plub-in, K., Hankin, A., Rao, R. R., Stephens, I. E. L., Titirici, M., & Luo, H. (2025) · ChemCatChem · doi:10.1002/cctc.202500152 · Cited by 41
Huang, J., Cheng, Q., Huang, Y., Yao, H., Zhu, H., & Yang, H. X. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00023 · Cited by 38
D’Urso, C., Oldani, C., Baglio, V., Merlo, L., & Aricò, A. S. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.07.111 · Cited by 37
Marcu, A., Tóth, G., Kundu, S., Colmenares, L. C., & Behm, R. J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.010 · Cited by 36
Carbon corrosion mechanism on nitrogen-doped carbon support — A density functional theory study
Li, Y., Li, J., Wang, Y., Chen, X., Liu, M., Zheng, Z., & Peng, X. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.148 · Cited by 35
Breaz, E., Gao, F., Miraoui, A., & Tirnovan, R. A. (2014) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2014.7049090 · Cited by 37
García‐Salaberri, P. A. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120824 · Cited by 35
Lamibrac, A., Maranzana, G., Dillet, J., Lottin, O., Didierjean, S., Durst, J., Dubau, L., Maillard, F. M., & Chatenet, M. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.09.038 · Cited by 39
Potential-driven instability effect of carbon supports for Pt/C electrocatalysts
Liu, F., Wei, P., Zhang, J., Shi, M., Hou, J., Chen, H., Li, Y., & Li, S. (2023) · Carbon · doi:10.1016/j.carbon.2023.118562 · Cited by 33
Paul, M. T. Y., & Gates, B. D. (2019) · Scientific Reports · doi:10.1038/s41598-019-38855-6 · Cited by 31
Chen, Y., Singh, Y., Ramani, D., Orfino, F. P., Dutta, M., & Kjeang, E. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230674 · Cited by 30
Baroody, H., & Kjeang, E. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abf5aa · Cited by 30
Impact of Shutdown Procedures on Recovery Phenomena of Proton Exchange Membrane Fuel Cells
Pivac, I., & Barbir, F. (2020) · Fuel Cells · doi:10.1002/fuce.201900174 · Cited by 29
Deng, Z., Miao, B., Chen, Q., Chen, J., Tong, C., Liu, H., Deendarlianto, D., Suwarno, S., Wang, H., & Chan, S. H. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116598 · Cited by 28
Digital twin development for PEMFC degradation estimation and aging data generation
Qi, X. M., Gao, X., Zhang, H., Qiu, Y., Zhang, R., & Sui, P. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.11.222 · Cited by 26
Mirfarsi, S. H., Karimi, A., Rowshanzamir, S., & Parnian, M. J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.067 · Cited by 26
Dong, E., Cao, S., Zhang, R., Chen, L., & Tao, W. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.144030 · Cited by 26
Chen, Y., Bahrami, M., Kumar, N., Orfino, F. P., Dutta, M., Lauritzen, M. V., Setzler, E., Agapov, A. L., & Kjeang, E. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad0e43 · Cited by 26
Huang, W., Niu, T., Zhang, C., Fu, Z., Zhang, Y., Zhou, W., Pan, Z., & Zhang, K. (2023) · Energy · doi:10.1016/j.energy.2023.126937 · Cited by 24
Expert diagnosis of polymer electrolyte fuel cells
Davies, B., Jackson, L. M., & Dunnett, S. J. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.02.121 · Cited by 26
Rabissi, C., Gazdzicki, P., Guétaz, L., Escribano, S., Grahl‐Madsen, L., Baricci, A., & Casalegno, A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.034 · Cited by 24
Chen, Y., Singh, Y., Ramani, D., Orfino, F. P., Dutta, M., & Kjeang, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230673 · Cited by 31
Evaluation of titanium oxide introduction in the electrode structure for portable PEMFC applications
Gatto, I., Saccà, A., Pedicini, R., Passalacqua, E., & Carbone, A. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.05.200 · Cited by 23
Lim, A., Tesch, M. F., & Spanos, I. (2023) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2023.101272 · Cited by 25
Nguyen, N. D., Nguyen, V. T., Nghiem, Q. T. P., Woo, J., Kim, Y., & Yu, S. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125994 · Cited by 25
Wu, Z., Pei, P., Xu, H., Jia, X., Ren, P., & Wang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113320 · Cited by 21
Han, Z., Németh, T., Yandrasits, M., Ren, H., Bangay, W., Saatkamp, T., & Gubler, L. (2024) · ACS electrochemistry. · doi:10.1021/acselectrochem.4c00123 · Cited by 20
Zhang, J., Song, C., & Zhang, J. J. (2011) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4003977 · Cited by 19
Hierarchical TiN Nanostructured Thin Film Electrode for Highly Stable PEM Fuel Cells
Perego, A., Giuffredi, G., Mazzolini, P., Colombo, M., Brescia, R., Prato, M., Sabarirajan, D. C., Zenyuk, I. V., Bossola, F., Santo, V. D., et al. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b02030 · Cited by 18
Highly Active and Stable Pt3Cr/C Alloy Catalyst in H2-PEMFC
Sakthivel, M., Radev, I., Peinecke, V., & Drillet, J. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0761508jes · Cited by 18
Isolated chemical degradation induced decay of mechanical membrane properties in fuel cells
Bhattacharya, S., Leung, J., Lauritzen, M. V., & Kjeang, E. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136489 · Cited by 20
Trogisch, N., Babik, D., Orfanidi, A., Jegert, G., Albert, A., & Eichel, R. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad7e51 · Cited by 17
Choi, Y., Kim, M., Park, J., & Goo, Y. (2025) · Applied Sciences · doi:10.3390/app15031300 · Cited by 18
Mashindi, V., Mente, P., Mpofu, N., Phaahlamohlaka, T. N., Makgae, O. A., Kirkland, A. I., Forbes, R. P., Ozoemena, K. I., Levecque, P. B. J., & Coville, N. J. (2021) · Journal of Applied Electrochemistry · doi:10.1007/s10800-021-01554-0 · Cited by 17
The Effect of Potential Cycling on High Temperature PEM Fuel Cell with Different Flow Field Designs
Bandlamudi, V., Bujło, P., Linkov, V., & Pasupathi, S. (2019) · Fuel Cells · doi:10.1002/fuce.201800127 · Cited by 17
Trogisch, N., Albert, A., & Eichel, R. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237408 · Cited by 16
Kozhushner, A., Li, Q., & Elbaz, L. (2023) · Energies · doi:10.3390/en16093659 · Cited by 16
Analysis and Evaluation of Aging Phenomena in PEMFCs
Lapicque, F., Bonnet, C., Huang, B., & Chatillon, Y. (2012) · Advances in chemical engineering · doi:10.1016/b978-0-12-386874-9.00009-9 · Cited by 18
Martini, V., Mocera, F., & Somà, A. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15030091 · Cited by 14
Dombrovskis, J. K., & Palmqvist, A. E. C. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.038 · Cited by 14
Agrawal, K., Naik, A. A., Chaudhary, S., Parvatalu, D., & Santhanam, V. (2021) · Chemistry - An Asian Journal · doi:10.1002/asia.202100746 · Cited by 14
Biosourced Antioxidants for Chemical Durability Enhancement of Perfluorosulfonic Acid Membrane
Agarwal, T., Adhikari, S., Babu, S. K., Prasad, A. K., Advani, S. G., & Borup, R. L. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308856 · Cited by 13
Choi, H., Choi, H., Choi, H. J., Kim, J., Kim, O., Kim, Y., SUNG, S. Y., Eom, D., Park, S., Ahn, C., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236396 · Cited by 14
Trogisch, N., Đào, T. A., Albert, A., Jovanovic, S., Rameker, R., & Eichel, R. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237310 · Cited by 13
High‐Performance Chemically Regenerative Redox Fuel Cells Using a NO3−/NO Regeneration Reaction
Han, S., Kwak, D., Park, H. S., Choi, I., Park, J., Kim, S., Kim, M., Hong, S., & Park, K. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201610738 · Cited by 13
Bahrami, M., Chen, Y., Kumar, N., Orfino, F. P., Dutta, M., Lauritzen, M. V., Setzler, E., Agapov, A. L., & Kjeang, E. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/add29a · Cited by 12
Seo, J. H., Baik, K. D., Kim, D. K., Kim, S., Choi, J. W., Kim, M., Song, H. H., & Kim, M. S. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.09.043 · Cited by 13
Metadata
- Authors
- Garland, N., Benjamin, T., & Kopasz, J.
- Affiliations
- United States Department of Energy (US)
- Argonne National Laboratory (US)
- Venue
- ECS Transactions
- Publisher
- The Electrochemical Society
- Published
- 2007-09-28
- Volume
- 11
- Issue
- 1
- Pages
- 923-931
- ISSN
- 1938-5862 (ISSN-L)
- 1938-6737
- OpenAlex
- W2313173723
- Cited by
- 153
- References
- 0
- Citations by year
- 2026: 6 · 2025: 18 · 2024: 17 · 2023: 17 · 2022: 9 · 2021: 14 · 2020: 6 · 2019: 11 · 2018: 11 · 2017: 8 · 2016: 3 · 2015: 4 · 2014: 10 · 2013: 1 · 2012: 10
- FWCI
- 1.51
- Type
- conference paper
- Language
- en
- Open access
- closed
- Licence
- iopscience.iop.org/page/copyright (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Locations
- ECS Transactions (publishedVersion)
- Funders
- U.S. Department of Energy
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Keywords
- fuel cell durability, proton exchange membrane fuel cells, accelerated stress testing, transportation fuel cells, cycling conditions, operating temperature range, relative humidity, half-cell potential, anode degradation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.