The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Abstract
Intercalation-induced stress and heat generation inside Li-ion battery cathode ( LiMn 2 O 4 ) particles under potentiodynamic control are simulated in this paper. We combined analyses of transport and kinetics in determining resulting stresses, which arise from concentration gradients in cathode particles, and heat generation. Two peaks in boundary reaction flux, and resulting stresses, were determined from the modeling of electrochemical kinetics and diffusion, using intrinsic material properties (resulting in two plateaus in the open-circuit potential) and the applied potential. Resistive heating was identified as the most important heat generation source. To probe the impact of the particle shape (equivalent radius and aspect ratio of an ellipsoidal particle) and the potential sweep rate on stress and heat generation, a surrogate-based analysis was also conducted. The systematic study showed that both intercalation-induced stress and time-averaged resistive heat generation rate increase with particle radius and potential sweep rate. Intercalation-induced stress increases first, then decreases as the aspect ratio of an ellipsoidal particle increases, whereas time-averaged resistive heat generation rate decreases as aspect ratio increases. This surrogate-based analysis suggests that ellipsoidal particles with larger aspect ratios are preferred over spherical particles, in improving battery performance when stress and heat generation are the only factors considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Response Surface Methodology: Process and Product Optimization Using Designed Experiments
Gunst, R. F., Myers, R. H., & Montgomery, D. C. (1996) · Technometrics · doi:10.2307/1270613 · Cited by 9,530
McKay, M. D., Beckman, R. J., & Conover, W. J. (2000) · Technometrics · doi:10.2307/1271432 · Cited by 7,415
On the Experimental Attainment of Optimum Conditions
Box, G. E. P., & Wilson, K. B. (1951) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1951.tb00067.x · Cited by 4,464
Myers, R. H., & Montgomery, D. C. (1996) · IIE Transactions · doi:10.1080/15458830.1996.11770760 · Cited by 3,819
McKay, M. D., Beckman, R. J., & Conover, W. J. (1979) · Technometrics · doi:10.2307/1268522 · Cited by 3,757
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Surrogate-based analysis and optimization
Queipo, N. V., Haftka, R. T., Shyy, W., Goel, T., Vaidyanathan, R., & Kevin Tucker, P. (2005) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2005.02.001 · Cited by 2,446
Self-citationSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue
Dowling, N. E. (1993) · Virtual Defense Library (Ministerio de Defensa) · Cited by 1,579
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles
Zhang, X., Shyy, W., & Marie Sastry, A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2759840 · Cited by 893
Self-citationMechanical Behavior of Materials
(2005) · Materials Today · doi:10.1016/s1369-7021(05)71163-9 · Cited by 840
Stress generation and fracture in lithium insertion materials
Christensen, J., & Newman, J. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0095-1 · Cited by 727
Thermal analysis of lithium-ion batteries
Chen, S. C., Wan, C. C., & Wang, Y. Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.064 · Cited by 708
Wang, H., Jang, Y., Huang, B., Sadoway, D. R., & Chiang, Y. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391631 · Cited by 682
Thermal Analysis of Lithium‐Ion Batteries
Chen, Y., & Evans, J. W. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837095 · Cited by 545
Thermal Stability Studies of Li‐Ion Cells and Components
Maleki, H., Deng, G., Anani, A., & Howard, J. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392458 · Cited by 437
Pasquier, A. D., Disma, F., Bowmer, T., Gozdz, A. S., Amatucci, G., & Tarascon, J. ‐. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838287 · Cited by 436
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Cracking causing cyclic instability of LiFePO4 cathode material
Wang, D., Wu, X., Wang, Z., & Chen, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.06.059 · Cited by 354
Microstructural Modeling and Design of Rechargeable Lithium-Ion Batteries
Garcı́a, R. E., Chiang, Y.-M., Craig Carter, W., Limthongkul, P., & Bishop, C. M. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836132 · Cited by 341
Influence of carbon black and binder on Li-ion batteries
Fransson, L., Eriksson, T., Edström, K., Gustafsson, T., & Thomas, J. O. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00481-5 · Cited by 232
Modeling Lithium Intercalation of a Single Spinel Particle under Potentiodynamic Control
Zhang, D., Popov, B. N., & White, R. E. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393279 · Cited by 230
Chen, Y., & Evans, J. W. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059263 · Cited by 177
Zaghib, K., Shim, J., Guerfi, A., Charest, P., & Striebel, K. A. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1865652 · Cited by 168
Selection of Conductive Additives in Li-Ion Battery Cathodes
Chen, Y.-H., Wang, C.-W., Liu, G., Song, X.-Y., Battaglia, V. S., & Sastry, A. M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2767839 · Cited by 165
Self-citationThomas, K. E., Bogatu, C., & Newman, J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1369365 · Cited by 154
Verwey-Type Transition and Magnetic Properties of the LiMn2O4Spinels
Shimakawa, Y., Numata, T., & Tabuchi, J. (1997) · Journal of Solid State Chemistry · doi:10.1006/jssc.1997.7366 · Cited by 152
Effects of intercalation-induced stress on lithium transport through porous LiCoO2 electrode
CHOI, Y., & Pyun, S. I. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00253-1 · Cited by 116
Two-Dimensional vs. Three-Dimensional Clustering and Percolation in Fields of Overlapping Ellipsoids
Yi, Y., Wang, C.-W., & Sastry, A. M. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1769272 · Cited by 71
Self-citationPreparation and characterization of gold-codeposited LiMn2O4 electrodes
Lim, M.-R., Cho, W.-I., & Kim, K. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00518-8 · Cited by 52
Cited by
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Self-citationDeformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Silicon-based materials as high capacity anodes for next generation lithium ion batteries
Liang, B., Liu, Y., & Xu, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.096 · Cited by 624
Qi, Y., Guo, H., Hector, L. G., & Timmons, A. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3327913 · Cited by 491
Cheng, Y.-T., & Verbrugge, M. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.021 · Cited by 469
Metadata
- Authors
- Zhang, X., Sastry, A. M., & Shyy, W.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2008
- Volume
- 155
- Issue
- 7
- Pages
- A542
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2150089123
- Cited by
- 334
- References
- 33
- FWCI
- 16.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.