Editors’ Choice—Review—Recent Advances in Mixed Potential Sensors
Open accessThe DOI matches its Crossref record; 157 of the 157 references it cites were found in a registry or an index.
Abstract
Gas sensors are widely used in environmental monitoring and provide controls especially when working with toxic gases. YSZ based λ-sensors have been utilized in the automobile industry for exhaust gas monitoring for more than 40 years. However, recent regulations on emissions reduction has forced further development of toxic gases monitoring in various applications. Mixed potential sensors with YSZ electrolyte are receiving increased attention due to their higher sensitivity and durability under harsh conditions. This review focuses on recent (past 5 years) developments made on electrode and electrolyte structure along with new sensing electrode materials towards detecting gases such as NO x, NH 3, H 2, CO and hydrocarbons (HCs). The theory of mixed potential sensors is discussed along with recent developments in detection of multi-gas mixtures using the output from an array of sensors in a mathematical model. Future directions for mixed potential sensor research, and methodologies to improving sensing characteristics are also outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“For instance, Au-La(Sr)MnO 3 electrodes demonstrate excellent performance in NO detection but are susceptible to interference from NO 2[151].”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [151]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Turiel, E. (2007) · Handbook of Child Psychology · doi:10.1002/9780470147658.chpsy0313 · Cited by 2,143
An overview of hydrogen safety sensors and requirements
Buttner, W. J., Post, M. B., Burgess, R., & Rivkin, C. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.04.176 · Cited by 585
Review of Electrochemical Hydrogen Sensors
Korotcenkov, G., Han, S. D., & Stetter, J. R. (2009) · Chemical Reviews · doi:10.1021/cr800339k · Cited by 546
Resistive-based gas sensors for detection of benzene, toluene and xylene (BTX) gases: a review
Mirzaei, A., Kim, J.-H., Kim, H. W., & Kim, S. S. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc00245b · Cited by 367
A review of mixed-potential type zirconia-based gas sensors
Miura, N., Sato, T., Anggraini, S. A., Ikeda, H., & Zhuiykov, S. (2014) · Ionics · doi:10.1007/s11581-014-1140-1 · Cited by 334
Resistive-type hydrogen gas sensor based on TiO2: A review
Li, Z., Yao, Z., Haidry, A. A., Plecenik, T., Xie, L., Sun, L., & Fatima, Q. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.09.051 · Cited by 329
Review—Conducting Polymers as Chemiresistive Gas Sensing Materials: A Review
Wong, Y. C., Ang, B. C., Haseeb, A. S. M. A., Baharuddin, A. A., & Wong, Y. H. (2020) · Journal of The Electrochemical Society · doi:10.1149/2.0032003jes · Cited by 286
Baron, R., & Saffell, J. (2017) · ACS Sensors · doi:10.1021/acssensors.7b00620 · Cited by 270
Solid-state mixed potential gas sensors: theory, experiments and challenges
Garzon, F. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00348-9 · Cited by 269
Shaddick, G., Thomas, M. L., Amini, H., Broday, D., Cohen, A., Frostad, J., Green, A., Gumy, S., Liu, Y., Martin, R. V., et al. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02864 · Cited by 241
Highly selective CO sensor using stabilized zirconia and a couple of oxide electrodes
Miura, N., Raisen, T., Lu, G., & Yamazoe, N. (1998) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(98)00053-7 · Cited by 213
Gasoline automobile catalysis and its historical journey to cleaner air
Farrauto, R. J., Deeba, M., & Alerasool, S. (2019) · Nature Catalysis · doi:10.1038/s41929-019-0312-9 · Cited by 210
Physical Principles Governing Nonideal Behavior of the Zirconia Oxygen Sensor
Fleming, W. J. (1977) · Journal of The Electrochemical Society · doi:10.1149/1.2133235 · Cited by 197
High‐Temperature Ceramic Gas Sensors: A Review
Akbar, S., Dutta, P., & Lee, C. (2006) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2006.02084.x · Cited by 195
High-temperature hydrogen sensor based on stabilized zirconia and a metal oxide electrode
Lu, G., Miura, N., & Yamazoe, N. (1996) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(97)80042-1 · Cited by 193
Progress in mixed-potential type devices based on solid electrolyte for sensing redox gases
Miura, N. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00411-2 · Cited by 173
Miura, N., Kurosawa, H., Hasei, M., Lu, G., & Yamazoe, N. (1996) · Solid State Ionics · doi:10.1016/0167-2738(96)00252-4 · Cited by 169
Aono, H., Traversa, E., Sakamoto, M., & Sadaoka, Y. (2003) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(03)00328-9 · Cited by 165
A review of high-temperature electrochemical sensors based on stabilized zirconia
Liu, T., Zhang, X., Yuan, L., & Yu, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.10.012 · Cited by 142
Carbon monoxide gas sensor made of stabilized zirconia
Okamoto, H., Obayashi, H., & KUDO, T. (1980) · Solid State Ionics · doi:10.1016/0167-2738(80)90012-0 · Cited by 133
Mixed Potential Type NO x Sensor Based on Stabilized Zirconia and Oxide Electrode
Miura, N., Lu, G., Yamazoe, N., Kurosawa, H., & Hasei, M. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836448 · Cited by 130
Exploitation of Unique Properties of Zeolites in the Development of Gas Sensors
Zheng, Y., Li, X., & Dutta, P. K. (2012) · Sensors · doi:10.3390/s120405170 · Cited by 128
Elumalai, P., Wang, J., Zhuiykov, S., Terada, D., Hasei, M., & Miura, N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1923707 · Cited by 124
Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary
Liang, X., Yang, S., Li, J., Zhang, H., Diao, Q., Zhao, W., & Lu, G. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.02.051 · Cited by 120
Miura, N., Wang, J., Nakatou, M., Elumalai, P., Zhuiykov, S., & Hasei, M. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.08.009 · Cited by 118
Park, J., Yoon, B. Y., Park, C., Lee, W., & Lee, C. B. (2008) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2008.10.006 · Cited by 113
Sekhar, P. K., Brosha, E. L., Mukundan, R., Li, W., Nelson, M. A., Palanisamy, P., & Garzón, F. H. (2009) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2009.10.045 · Cited by 112
Self-citationMixed-potential type NH3 sensor based on stabilized zirconia and Ni3V2O8 sensing electrode
Liu, F., Sun, R., Guan, Y., Cheng, X., Zhang, H., Guan, Y., Liang, X., Sun, P., & Lu, G. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.01.043 · Cited by 110
Paul, A., Muthukumar, S., & Prasad, S. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0112003jes · Cited by 102
Curtis, E. M., & Lee, J. M. (2019) · Journal of Environmental Economics and Management · doi:10.1016/j.jeem.2019.04.004 · Cited by 96
Mixed Potential Hydrocarbon Sensors based on a YSZ Electrolyte and Oxide Electrodes
Mukundan, R., Brosha, E. L., & Garzón, F. H. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1621880 · Cited by 93
Self-citationA novel mixed potential NH3 sensor based on TiO2@WO3 core–shell composite sensing electrode
Meng, W., Dai, L., Zhu, J., Li, Y., Meng, W., Zhou, H., & Wang, L. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.02.028 · Cited by 90
Electrochemistry of Zirconia Gas Sensors
Zhuiykov, S. (2007) · CRC Press eBooks · doi:10.1201/9781420047622 · Cited by 89
Liu, F., Wang, Y., Wang, B., Yang, X., Wang, Q., Liang, X., Sun, P., Chuai, X., Wang, Y., & Lu, G. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.07.145 · Cited by 88
Wang, L., Meng, W., He, Z., Meng, W., Li, Y., & Dai, L. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.05.156 · Cited by 83
Sensing Mechanism of Potentiometric Gas Sensors Based on Stabilized Zirconia with Oxide Electrodes
Bartolomeo, E. D., Grilli, M. L., & Traversa, E. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1695387 · Cited by 81
Mixed potential sensors using lanthanum manganate and terbium yttrium zirconium oxide electrodes
Brosha, E. L., Mukundan, R., Brown, D. R., & Garzón, F. H. (2002) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(02)00216-2 · Cited by 79
Self-citationMiura, N., Yan, Y., Lu, G., & Yamazoe, N. (1996) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(96)01828-x · Cited by 78
Development and testing of an electrochemical methane sensor
Sekhar, P. K., Kysar, J., Brosha, E. L., & Kreller, C. R. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.12.100 · Cited by 77
Mixed potential NH3 sensor with LaCoO3 reference electrode
Lee, I., Jung, B.-H., Park, J., Lee, C., Hwang, J., & Park, C. (2012) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2012.09.009 · Cited by 76
Yu, Y., Wang, B., Wang, C., Li, X. D., Huang, J., Zhang, H., Xia, F., & Xiao, J. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.07.171 · Cited by 68
Volkov, A. N., Gorbova, E., Вылков, А. И., Medvedev, D. A., Demin, A. K., & Tsiakaras, P. E. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.01.097 · Cited by 68
Mukundan, R., Brosha, E. L., Brown, D. R., & Garzon, F. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393398 · Cited by 67
Self-citationZhang, H., Yi, J., & Jiang, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01901 · Cited by 64
Review—Electrochemical NOxGas Sensors Based on Stabilized Zirconia
Liu, T., Wang, X., Li, L., & Yu, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0501713jes · Cited by 64
High Performance Mixed-Potential Type NOx Sensor Based On Stabilized Zirconia and Oxide Electrode
Lu, G., Diao, Q., Yin, C., Yang, S., Guan, Y., Cheng, X., & Liang, X. (2014) · Solid State Ionics · doi:10.1016/j.ssi.2014.01.037 · Cited by 61
Liu, F., Li, S., He, J., Wang, J., You, R., Yang, Z., Zhao, L., Sun, P., Yan, X., Liang, X., et al. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.09.024 · Cited by 61
High-temperature NO2 gas sensor based on stabilized zirconia and CoTa2O6 sensing electrode
Liu, F., Wang, B., Yang, X., Guan, Y., Wang, Q., Liang, X., Sun, P., Wang, Y., & Lu, G. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.08.134 · Cited by 59
Mixed-potential NH3 sensor based on Ce0.8Gd0.2O1.9 solid electrolyte
Zhang, J., Zhang, C., Xia, J., Li, Q., Jiang, D., & Zheng, X. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.04.035 · Cited by 59
Sub-ppb SO2 gas sensor based on NASICON and LaxSm1-xFeO3 sensing electrode
Ma, C., Hao, X., Yang, X., Liang, X., Liu, F., Liu, T., Yang, C., Zhu, H., & Lu, G. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.09.194 · Cited by 59
Bhardwaj, A., Kim, I., Hong, J., Kumar, A., & Song, S. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.01.003 · Cited by 59
Non‐Nernstian Behavior at Modified Au Electrodes for Hydrocarbon Gas Sensing
Hibino, T., Kakimoto, S., & Sano, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392478 · Cited by 58
Influence of the V2O5 content of the catalyst layer of a non-Nernstian NH3 sensor
Schönauer‐Kamin, D., Fleischer, M., & Moos, R. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.08.035 · Cited by 57
Liu, F., Guan, Y., Dai, M., Zhang, H., Guan, Y., Sun, R., Liang, X., Sun, P., Liu, F., & Lu, G. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.04.048 · Cited by 55
Sekhar, P. K., & Subramaniyam, K. (2013) · ECS Electrochemistry Letters · doi:10.1149/2.005402eel · Cited by 55
Zhang, W., Qi, S., Pantaleo, G., & Liotta, L. F. (2019) · Catalysts · doi:10.3390/catal9060527 · Cited by 55
YSZ-based NO2 sensor utilizing hierarchical In2O3 electrode
Liu, F., Guan, Y., Sun, H., Xu, X., Sun, R., Liang, X., Sun, P., Gao, Y. L., & Lu, G. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.08.126 · Cited by 53
Acid‐Doped Polybenzimidazole as the Membrane of Electrochemical Hydrogen Sensors
Bouchet, R., Siebert, E., & Vitter, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837622 · Cited by 52
Guan, Y., Li, C., Cheng, X., Wang, B., Sun, R., Liang, X., Zhao, J.-H., Chen, H., & Lu, G. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.02.098 · Cited by 52
Romanytsia, I., Viricelle, J.-P., Vernoux, P., & Pijolat, C. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.10.017 · Cited by 51
Yang, J.-C., & Dutta, P. K. (2007) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2007.01.028 · Cited by 50
Dai, L., Liu, Y., Meng, W., Yang, G., Zhou, H., He, Z., Li, Y., & Wang, L. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.01.106 · Cited by 50
Wang, B., Liu, F., Yang, X., Guan, Y., Ma, C., Hao, X., Liang, X., Liu, F., Sun, P., Zhang, T., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04219 · Cited by 50
Mixed-potential type NH3 sensor based on TiO2 sensing electrode with a phase transformation effect
Meng, W., Dai, L., Meng, W., Zhou, H., Li, Y., He, Z., & Wang, L. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.09.021 · Cited by 50
Highly sensitive mixed-potential-type NO2 sensor using porous double-layer YSZ substrate
Yin, C., Guan, Y., Zhu, Z., Liang, X., Wang, B., Diao, Q., Zhang, H., Ma, J., Liu, F., Sun, Y., et al. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.03.064 · Cited by 48
Mixed potential hydrogen sensor using ZnWO4 sensing electrode
Tang, Z., Li, X., Yang, J., Yu, J., Wang, J., & Tang, Z. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.01.086 · Cited by 48
Hydrogen sensing of the mixed-potential-type MnWO4/YSZ/Pt sensor
Li, Y., Li, X., Tang, Z., Tang, Z., Yu, J., & Wang, J. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.09.055 · Cited by 46
Liu, F., Wang, B., Yang, X., Guan, Y., Sun, R., Wang, Q., Liang, X., Sun, P., & Lu, G. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.03.139 · Cited by 46
A finite element model for mixed potential sensors
Ritter, T., Lattus, J., Hagen, G., & Moos, R. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.02.052 · Cited by 46
YSZ-based mixed potential H2S sensor using La2NiO4 sensing electrode
Hao, X., Ma, C., Yang, X., Liu, T., Wang, B., Liu, F., Liang, X., Yang, C., Zhu, H., & Lu, G. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.09.127 · Cited by 45
Mixed potential NH3 sensor based on Mg-doped lanthanum silicate oxyapatite
Dai, L., Yang, G., Zhou, H., He, Z., Li, Y., & Wang, L. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.10.071 · Cited by 44
Miura, N., Wang, J., Elumalai, P., Ueda, T., Terada, D., & Hasei, M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2747532 · Cited by 44
Solid state mixed-potential sensors as direct conversion sensors for automotive catalysts
Ritter, T., Hagen, G., Lattus, J., & Moos, R. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.09.126 · Cited by 43
CO sensing performances of YSZ-based sensor attached with sol-gel derived ZnO nanospheres
Mahendraprabhu, K., Sharma, A. S., & Elumalai, P. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.11.164 · Cited by 43
Xu, L., Dai, L., He, Z., Meng, W., Li, Y., & Wang, L. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.126854 · Cited by 43
Hibino, T. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390937 · Cited by 42
Mixed-potential type NO sensor using stabilized zirconia and MoO3–In2O3 nanocomposites
Cai, H., Sun, R., Yang, X., Liang, X., Wang, C., Sun, P., Liu, F., Zhao, C. H., Sun, Y., & Lu, G. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.243 · Cited by 42
Hyodo, T., Goto, T., Takamori, M., Ueda, T., & Shimizu, Y. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.127041 · Cited by 41
Electrochemical Sensors for Air Quality Monitoring
Ramaiyan, K. P., & Mukundan, R. (2019) · The Electrochemical Society Interface · doi:10.1149/2.f08193if · Cited by 41
Self-citationSun, R., Guan, Y., Cheng, X., Guan, Y., Liang, X., Ma, J., Sun, P., Sun, Y., & Lu, G. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.11.143 · Cited by 40
Development and testing of a miniaturized hydrogen safety sensor prototype
Sekhar, P. K., Brosha, E. L., Mukundan, R., Nelson, M. A., Williamson, T. L., & Garzón, F. H. (2010) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2010.05.031 · Cited by 40
Self-citationWang, B., Yao, S., Liu, F., Guan, Y., Hao, X., Liang, X., Liu, F., Sun, P., Wang, Y., Song, H., et al. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.12.094 · Cited by 40
Ammonia, a poorly understood smog ingredient, could be key to limiting deadly pollution
(2018) · AAAS Articles DO Group · doi:10.1126/science.aav3862 · Cited by 40
Wang, C., Yang, B., Xu, J., Xia, F., & Xiao, J. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.126863 · Cited by 40
Mixed Potential Hydrogen Sensor Combining Oxide Ion Conductor with Oxide Electrode
Lu, G., Miura, N., & Yamazoe, N. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836959 · Cited by 39
Stabilized zirconia-based selective NO2 sensor using sol-gel derived Nb2O5 sensing-electrode
Mahendraprabhu, K., & Elumalai, P. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.07.010 · Cited by 38
Wang, C., Li, X. D., Yu, Y., Wang, B., Huang, J., Xia, F., Zhang, H., & Xiao, J. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.09.117 · Cited by 38
Li, Y., Li, X., Tang, Z., Wang, J., Yu, J., & Tang, Z. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.09.110 · Cited by 37
Meng, W., Wang, L., Li, Y., Dai, L., Zhu, J., Zhou, H., & He, Z. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.12.120 · Cited by 37
Using sensor arrays to decode NO /NH3/C3H8 gas mixtures for automotive exhaust monitoring
Javed, U., Ramaiyan, K. P., Kreller, C. R., Brosha, E. L., Mukundan, R., & Morozov, A. V. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.02.069 · Cited by 37
Self-citationGoto, T., Hyodo, T., Ueda, T., Kamada, K., Kaneyasu, K., & Shimizu, Y. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.03.045 · Cited by 34
Effect of sintering temperature of mixed potential sensor Pt/YSZ/LaFeO3 on gas sensing performance
Tho, N. D., Huong, D. V., Ngan, P. Q., Thai, G. H., Thu, D. T. A., Thu, Đ. T., Tuoi, N. T. M., Toan, N. N., & Giang, H. T. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.10.113 · Cited by 34
Non-ideal emf behavior of zirconia oxygen sensors
Okamoto, H., Obayashi, H., & KUDO, T. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90131-4 · Cited by 33
Development of an Al2O3/ZrO2-Composite High-Accuracy NOx Sensor
Sasaki, H., Scholl, D. J., Parsons, M. H., Inagaki, H., Shiotani, K., Visser, J., Zawacki, G., Kawai, T., Teramoto, S., & Kubinski, D. J. (2010) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2010-01-0041 · Cited by 32
Hashimoto, A., Hibino, T., Mori, K., & Sano, M. (2001) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(01)00931-5 · Cited by 32
Trace detection of research department explosive (RDX) using electrochemical gas sensor
Sekhar, P. K., & Wignes, F. L. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.11.138 · Cited by 32
Liu, F., He, J., Yang, Z., You, R., Wang, J., Zhao, L., Wang, Q., Liang, X., Sun, P., Yan, X., et al. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.04.044 · Cited by 32
Sensing Performance of a YSZ-Based Electrochemical NO2 Sensor Using Nanocomposite Electrodes
Yoo, Y.-S., Bhardwaj, A., Hong, J., Im, H., & Song, S. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1261910jes · Cited by 32
Tho, N. D., Huong, D. V., Giang, H. T., Ngan, P. Q., Thai, G. H., Thu, D. T. A., Thu, Đ. T., Tuoi, N. T. M., Toan, N. N., Thắng, P. Đ., et al. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2015.12.205 · Cited by 31
Bhardwaj, A., Bae, H., Namgung, Y., Lim, J., & Song, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.10.146 · Cited by 31
Room-Temperature Hydrogen Sensors Based on an In[sup 3+]-Doped SnP[sub 2]O[sub 7] Proton Conductor
Tomita, A., Namekata, Y., Nagao, M., & Hibino, T. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2713702 · Cited by 30
Hyodo, T., Goto, T., Ueda, T., Kaneyasu, K., & Shimizu, Y. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0561607jes · Cited by 30
Ueda, T., Sakai, M., Kamada, K., Hyodo, T., & Shimizu, Y. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.06.103 · Cited by 30
Elumalai, P., Zösel, J., Guth, U., & Miura, N. (2009) · Ionics · doi:10.1007/s11581-009-0354-0 · Cited by 29
Zirconia-based planar NO2 sensor using ultrathin NiO or laminated NiO–Au sensing electrode
Plashnitsa, V. V., Ueda, T., Elumalai, P., Kawaguchi, T., & Miura, N. (2007) · Ionics · doi:10.1007/s11581-007-0158-z · Cited by 29
Tsitron, J., Kreller, C. R., Sekhar, P. K., Mukundan, R., Garzón, F. H., Brosha, E. L., & Morozov, A. V. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.10.115 · Cited by 28
Self-citationEffect of nanocomposite Au–YSZ electrodes on potentiometric sensor response to NO and CO
Striker, T., Ramaswamy, V., Armstrong, E. N., Willson, P., Wachsman, E. D., & Ruud, J. A. (2013) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2013.02.039 · Cited by 28
Bouchet, R., Siebert, E., & Vitter, G. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393869 · Cited by 28
Ritter, T., Hagen, G., Kita, J., Wiegärtner, S., Schubert, F., & Moos, R. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.11.079 · Cited by 28
Response Characteristics of a Stable Mixed Potential Ammonia Sensor in Simulated Diesel Exhaust
Ramaiyan, K. P., Pihl, J. A., Kreller, C. R., Prikhodko, V. Y., Curran, S., Parks, J. E., Mukundan, R., & Brosha, E. L. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1271709jes · Cited by 28
Self-citationYou, R., Wang, T., Yu, H., Wang, J., Lu, G., Liu, F., & Cui, T. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.03.140 · Cited by 27
Zheng, X., Zhang, C., Xia, J., Zhou, G., Jiang, D., Wang, S., Li, X., Shen, Y., Dai, M., Wang, B., et al. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.01.016 · Cited by 27
Sato, T., Plashnitsa, V. V., Utiyama, M., & Miura, N. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3573780 · Cited by 26
You, R., Hao, X., Yu, H., Wang, B., Lu, G., Liu, F., & Cui, T. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.02.104 · Cited by 26
Cheng, X., Wang, C., Wang, B., Sun, R., Guan, Y., Sun, Y., Liang, X., Sun, P., & Lu, G. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.07.104 · Cited by 25
Effect of the Heterogeneous Catalytic Activity of Electrodes for Mixed Potential Sensors
Ritter, T., Lattus, J., Hagen, G., & Moos, R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0181816jes · Cited by 25
Zhang, X., Kohler, H., Schwotzer, M., & Guth, U. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.10.106 · Cited by 23
High-temperature CO / HC gas sensors to optimize firewood combustion in low-power fireplaces
Ojha, B., Illyaskutty, N., Knoblauch, J., Balachandran, M., & Kohler, H. (2017) · Journal of sensors and sensor systems · doi:10.5194/jsss-6-237-2017 · Cited by 23
Fujio, Y., Sato, T., & Miura, N. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.08.028 · Cited by 22
Hagen, G., Burger, K., Wiegärtner, S., Schönauer‐Kamin, D., & Moos, R. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.10.004 · Cited by 22
Zhang, X., Kohler, H., Schwotzer, M., Wu, Y., & Guth, U. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.05.168 · Cited by 22
YSZ-based sensor using Cr-Fe-based spinel-oxide electrodes for selective detection of CO
Anggraini, S. A., Fujio, Y., Ikeda, H., & Miura, N. (2017) · Analytica Chimica Acta · doi:10.1016/j.aca.2017.06.010 · Cited by 22
Tsui, L., Benavidez, A. D., Palanisamy, P., Evans, L. R., & Garzón, F. H. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.06.133 · Cited by 22
A New Low-Temperature Electrochemical Hydrocarbon and NOx Sensor
Sekhar, P. K., Moore, Z., Aravamudhan, S., & Khosla, A. (2017) · Sensors · doi:10.3390/s17122759 · Cited by 21
Elumalai, P., Plashnitsa, V. V., Fujio, Y., & Miura, N. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3174390 · Cited by 20
Chen, Y., Xia, F., & Xiao, J. (2014) · Solid-State Electronics · doi:10.1016/j.sse.2014.03.001 · Cited by 19
Wama, R., Plashnitsa, V. V., Elumalai, P., Kawaguchi, T., Fujio, Y., Utiyama, M., & Miura, N. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3090168 · Cited by 18
Zhang, X., Kohler, H., Schwotzer, M., Wu, Y., & Guth, U. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.09.073 · Cited by 18
Polybenzimidazole-Based Hydrogen Sensors II. Effect of the Electrode Preparation
Bouchet, R., Siebert, E., & Vitter, G. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393936 · Cited by 17
Balamurugan, C., Son, C., Hong, J., & Song, S. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.01.163 · Cited by 17
Bhardwaj, A., Hong, J., Kim, I., Namgung, Y., & Song, S. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.11.099 · Cited by 17
Li, X. D., Wang, C., Huang, J., Yu, Y., Wang, B., Zhang, H., Xia, F., & Xiao, J. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.02.118 · Cited by 16
CO Response Characteristics of NiFe2O4 Sensing Material at Elevated Temperature
Yang, B., Chao, W., Xiao, R., Yu, H., Wang, J., Xu, J., Liu, H., Xia, F., & Xiao, J. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0581912jes · Cited by 15
Tuning H 2 Sensing Performance of Zirconia-based Sensor using ZrSiO 4 (+Au) Sensing-electrode
Anggraini, S. A., Ikeda, H., & Miura, N. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.05.007 · Cited by 14
Tsui, L., Benavidez, A. D., Palanisamy, P., Evans, L. R., & Garzón, F. H. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.04.060 · Cited by 14
Potentiometric Ethene Sensor for Postharvest Detection Applications
Sekhar, P. K., Ludwig, T., Wilhelm, M., Graf, D., Riheen, M. A., & Mathur, S. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0501915jes · Cited by 14
Effect of palladium oxide electrode on potentiometric sensor response to carbon monoxide
Zhu, L., Zheng, Y., & Jian, J. (2015) · Ionics · doi:10.1007/s11581-015-1487-y · Cited by 13
Hong, H., Sun, J., Wu, C., & Liu, Z. (2019) · Sensors · doi:10.3390/s19153337 · Cited by 12
EMF response of the YSZ based potentiometric sensors in VOC contaminated air
Itagaki, Y., Mori, M., & Sadaoka, Y. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.08.002 · Cited by 11
Influence of the Solid-Electrolyte Ionic Material in a Potentiometric Sensor for Ethylene Detection
Toldrá‐Reig, F., Pastor, D., & Serra, J. M. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1171914jes · Cited by 11
A Three Electrode Mixed Potential Sensor for Gas Detection and Discrimination
Tsui, L., Benavidez, A. D., Palanisamy, P., Evans, L. R., & Garzón, F. H. (2016) · ECS Transactions · doi:10.1149/07516.0009ecst · Cited by 10
Additively manufactured mixed potential electrochemical sensors for NOx, C3H8, and NH3 detection
Tsui, L., Benavidez, A. D., Evans, L. R., & Garzón, F. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0054-2 · Cited by 10
Dynamometer Testing of Planar Mixed-Potential Sensors
Kreller, C. R., Sekhar, P. K., Prikhodko, V. Y., Pihl, J. A., Curran, S., Parks, J. E., Mukundan, R., Garzón, F. H., & Brosha, E. L. (2014) · ECS Transactions · doi:10.1149/06119.0055ecst · Cited by 9
Self-citationIndependent testing and validation of prototype hydrogen sensors
Sekhar, P. K., Zhou, J., Post, M. B., Woo, L. Y., Buttner, W., Penrose, W. R., Mukundan, R., Kreller, C. R., Glass, R. S., Garzón, F. H., et al. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.200 · Cited by 9
Self-citationBrosha, E. L., Romero, C. J., Poppe, D., Williamson, T. L., Kreller, C. R., Mukundan, R., Glass, R. S., & Wu, A. S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1491713jes · Cited by 9
Self-citationNovel zirconia-based NO2 sensor attached with carbon sensing-electrode
Sato, T., Ikeda, H., & Miura, N. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.06.010 · Cited by 7
Quantitative Decoding of Complex Gas Mixtures Using Mixed-Potential Sensor Arrays
Ramaiyan, K. P., Kreller, C. R., Brosha, E. L., Mukundan, R., Javed, U., & Morozov, A. V. (2016) · ECS Transactions · doi:10.1149/07516.0107ecst · Cited by 7
Self-citationWang, L., Gao, C., Dai, L., Zhou, H., Li, Y., Meng, W., He, Z., & Kumar, R. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.099 · Cited by 7
Akamatsu, T., Itoh, T., & Shin, W. (2017) · Sensors · doi:10.3390/s17010097 · Cited by 6
Development of Sensors and Sensing Technology for Hydrogen Fuel Cell Vehicle Applications
Brosha, E. L., Sekhar, P. K., Mukundan, R., Williamson, T. L., Garzón, F. H., Woo, L. Y., & Glass, R. S. (2010) · ECS Transactions · doi:10.1149/1.3429020 · Cited by 5
Self-citationApplication of Commercial Manufacturing Methods to Mixed-Potential NOx Sensors
Kreller, C. R., Sekhar, P. K., Li, W., Palanisamy, P., Brosha, E. L., Mukundan, R., & Garzón, F. H. (2013) · ECS Transactions · doi:10.1149/05012.0307ecst · Cited by 5
Self-citationSekhar, P. K., Brosha, E. L., Mukundan, R., Nelson, M. A., & Garzón, F. H. (2009) · ECS Transactions · doi:10.1149/1.3245168 · Cited by 5
Self-citationHighly selective zirconia-based propene sensor attached with sol–gel derived NiO nanospheres
Mahendraprabhu, K., & Elumalai, P. (2015) · RSC Advances · doi:10.1039/c4ra16992a · Cited by 4
Hibino, T., & Kobayashi, K. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.054405jes · Cited by 4
Trace Detection of 2, 4, 6-Trinitrotoluene Using Electrochemical Gas Sensors
Sekhar, P. K., Zhou, J., Hamblin, E. R., & Brosha, E. L. (2014) · ECS Transactions · doi:10.1149/06401.0085ecst · Cited by 4
Fujio, Y., Anggraini, S. A., Ikeda, H., Terasaki, N., & Miura, N. (2016) · ECS Transactions · doi:10.1149/07516.0059ecst · Cited by 4
Brosha, E. L., Romero, C. J., Poppe, D., Williamson, T. L., Kreller, C. R., Mukundan, R., Glass, R. S., & Wu, A. S. (2017) · ECS Transactions · doi:10.1149/08010.1333ecst · Cited by 1
Self-citation
Research works printed but not linked: 5
- 2019, Euro6-emission-limits, Official J. Eur. Union, 50, L171
- Woo, 2010, 10.2172/10163142010 · doi:10.2172/10163142010
- Brosha, 2010, ECS Trans., 26, 475
- Brosha, 2017, Poppe R&D 100 Award winner
- Hong, 2015, Chinese Journal of Sensors and Actuators, 28, 787
Cited by
Near‐Zero Power MOF‐Based Sensors for NO2 Detection
Small, L. J., Henkelis, S. E., Rademacher, D., Schindelholz, M. E., Krumhansl, J. L., Vogel, D. J., & Nenoff, T. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006598 · Cited by 129
Gorbova, E., Tzorbatzoglou, F., Molochas, C., Chloros, D., Demin, A. K., & Tsiakaras, P. E. (2021) · Catalysts · doi:10.3390/catal12010001 · Cited by 81
Kumaar Swamy Reddy, B., & Borse, P. H. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abf4ea · Cited by 79
A review of zirconia oxygen, NOx, and mixed potential gas sensors – History and current trends
Halley, S., Ramaiyan, K. P., Tsui, L., & Garzón, F. H. (2022) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2022.132363 · Cited by 74
Self-citationBrief Review on High-Temperature Electrochemical Hydrogen Sensors
Gorbova, E., Balkourani, G., Molochas, C., Sidiropoulos, D., Brouzgou, A., Demin, A. K., & Tsiakaras, P. E. (2022) · Catalysts · doi:10.3390/catal12121647 · Cited by 63
“Furthermore, tungstate-based composites, such as ZnWO 4 [37], MnWO 4 [38], CdWO 4 [39], and CoWO 4 [40], have been reported as alternative SEs [41,42].”
Background
Metadata
- Authors
- Ramaiyan, K. P., & Mukundan, R.
- Affiliations
- Los Alamos National Laboratory (US)
- Corresponding author
- Ramaiyan, Kannan Pasupathikovil
- Mukundan, Rangachary
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2020-01-02
- Volume
- 167
- Issue
- 3
- Pages
- 037547
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3002066587
- Cited by
- 52
- References
- 157
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 8 · 2023: 15 · 2022: 13 · 2021: 10 · 2020: 1
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor, 19 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 19 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Los Alamos National Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Gas Sensing Nanomaterials and Sensors
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical Chemistry and Sensors
- Keywords
- mixed potential sensor, yttria-stabilized zirconia electrolyte, lambda sensor, exhaust gas monitoring, toxic gas detection, NOx sensing, NH3 sensing, hydrogen detection, carbon monoxide detection, hydrocarbon detection, sensor arrays, electrode materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.