Inexpensive and Efficient Alkaline Water Electrolyzer with Robust Steel-Based Electrodes
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Electrolysis of aqueous solutions of alkali is a promising approach for the production of pure hydrogen. For this approach to be economical on a large scale, the overpotentials for the electrode reactions and the high-cost of nickel-based electrode substrates must be reduced. We report here on the performance of an “all-iron” electrolyzer cell that uses inexpensive steel-based electrodes. This alkaline water electrolyzer uses a steel mesh coated with a thin catalytic coating of alpha-nickel hydroxide for the oxygen evolution electrode, and another steel mesh sputter-coated with nickel and molybdenum for the hydrogen electrode. An alkaline electrolyzer with these steel-based electrodes, a commercial Zirfon® separator, and a solution of 30% potassium hydroxide exhibited an electrolysis cell voltage of 1.83 V and 1.71 V at 100 mA cm−2 when operating at 23 °C and 70 °C, respectively. We show that the performance of the steel-based electrodes is comparable to commercial electrodes based on nickel substrates. When the cell was operated continuously for 100 h at 1 A cm−2 at 23 °C, there was no measurable loss in performance, providing a preliminary confirmation of the robustness of these iron-based electrodes and electrocatalysts. We conclude that cost-effective iron-based electrolyzers could be a promising route to low-cost hydrogen production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review and evaluation of hydrogen production methods for better sustainability
Dincer, I., & Acar, C. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.12.035 · Cited by 2,641
Buttler, A., & Spliethoff, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.003 · Cited by 2,510
Developments and perspectives of oxide-based catalysts for the oxygen evolution reaction
Fabbri, E., Habereder, A., Waltar, K., Kötz, R., & Schmidt, T. J. (2014) · Catal. Sci. Technol. · doi:10.1039/c4cy00669k · Cited by 1,303
Ni–Mo Nanopowders for Efficient Electrochemical Hydrogen Evolution
McKone, J. R., Sadtler, B. F., Werlang, C. A., Lewis, N. S., & Gray, H. B. (2013) · ACS Catalysis · doi:10.1021/cs300691m · Cited by 798
Cited by
Oxygen Evolution Reaction in Alkaline Environment: Material Challenges and Solutions
Xie, X., Du, L., Yan, L., Park, S., Qiu, Y., Sokolowski, J., Wang, W., & Shao, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110036 · Cited by 792
Ďurovič, M., Hnát, J., & Bouzek, K. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229708 · Cited by 436
Metal Electrocatalysts for Hydrogen Production in Water Splitting
Kazemi, A., Manteghi, F., & Tehrani, Z. (2024) · ACS Omega · doi:10.1021/acsomega.3c07911 · Cited by 167
Metadata
- Authors
- Zayat, B., Mitra, D., & Narayanan, S. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2020-01-08
- Volume
- 167
- Issue
- 11
- Pages
- 114513
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3045361893
- Cited by
- 38
- References
- 4
- FWCI
- 0.96
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.