The DOI matches its Crossref record; 50 of the 52 references it cites were found in a registry or an index, and 1 are not checked yet.
Physics-Based Battery Model Parametrisation from Impedance Data
Open accessAbstract
Non-invasive parametrisation of physics-based battery models can be performed by fitting the model to electrochemical impedance spectroscopy (EIS) data containing features related to the different physical processes. However, this requires an impedance model to be derived, which may be complex to obtain analytically. We have developed the open-source software PyBaMM-EIS that provides a fast method to compute the impedance of any PyBaMM model at any operating point using automatic differentiation. Using PyBaMM-EIS, we investigate the impedance of the single particle model, single particle model with electrolyte (SPMe), and Doyle-Fuller-Newman model, and identify the SPMe as a parsimonious option that shows the typical features of measured lithium-ion cell impedance data. We provide a grouped-parameter SPMe and analyse the features in the impedance related to each parameter. Using the open-source software PyBOP, we estimate 18 grouped parameters both from simulated impedance data and from measured impedance data from a LG M50LT lithium-ion battery. The parameters that directly affect the response of the SPMe can be accurately determined and assigned to the correct electrode. Crucially, parameter fitting must be done simultaneously to measurements across a wide range of states-of-charge. Overall, this work presents a practical way to find the parameters of physics-based models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“These capabilities make PyBaMM well-suited for studying degradation mechanisms and state estimation problems; however, direct deployment of full-fidelity models for real-time SOC estimation in battery management systems is hindered by high computational costs and sensitivity to parameter identification errors under dynamic conditions [34].”
From A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries (2025) · cites this paper as [34]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
van der Vorst, H. A. (1992) · SIAM Journal on Scientific and Statistical Computing · doi:10.1137/0913035 · Cited by 5,308
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“The standard physics-based modelling approach for lithium-ion batteries is the Doyle-Fuller-Newman (DFN) framework [6, 7], based on porous-electrode theory, consisting of a set of coupled nonlinear partial di ff erential equations that are typically too expensive to simulate in a BMS.”
The timescale identification decoupling complicated kinetic processes in lithium batteries
Lu, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2022) · Joule · doi:10.1016/j.joule.2022.05.005 · Cited by 2,378
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 1×
“Often ad hoc equivalent circuit models [1] are used to fit measured data [2, 3], but these have the disadvantage that the parameters are not always physically meaningful and simulation may be inaccurate.”
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Electrochemical impedance spectroscopy
Wang, S., Zhang, J., Gharbi, O., Vivier, V., Gao, M., & Orazem, M. E. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00039-w · Cited by 1,140
Fisher information and stochastic complexity
Rissanen, J. J. (1996) · IEEE Transactions on Information Theory · doi:10.1109/18.481776 · Cited by 814
Ciucci, F., & Chen, C. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.03.123 · Cited by 678
Impedance Analysis of Electrochemical Systems
Vivier, V., & Orazem, M. E. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00876 · Cited by 615 · cited 1×
“Conventional EIS measurements [18, 19, 20] consist of taking an equilibrated battery at a fixed operating point (state-of-charge (SOC) and temperature) and applying a small sinusoidal current (or voltage) at set amplitude and frequency.”
Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610
Research works printed but not linked: 3
- Aitio, 2020, Bayesian parameter estimation applied to the Li-ion battery single particle model with electrolyte dynamics, IFAC-PapersOnLine, 53, 12497, 10.1016/j.ifacol.2020.12.1770 · doi:10.1016/j.ifacol.2020.12.1770
- LeVeque, 2002, vol. 31
- Marquis, 2020, Long-term degradation of lithium-ion batteries, Ph.D. thesis, University of Oxford
Cited by
Influence of periodic temperature variations on calendar ageing of lithium-ion batteries
Fly, A., Wimarshana, B., Bin-Mat-Arishad, I., & Broad, R. N. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238147 · Cited by 12
Zhang, Y., Xu, J., Xie, X., Huang, Q., Cheng, S., & Xie, J. (2025) · EES batteries. · doi:10.1039/d5eb00153f · Cited by 11
Chu, C. J., Thatipamula, S., & Onori, S. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae135d · Cited by 7
Bouvet, J., Woillez, É., & Chandesris, M. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.146924 · Cited by 7
Pseudo-Random Sequences for Low-Cost Operando Impedance Measurements of Li-Ion Batteries
Sihvo, J., Hallemans, N., Tan, A. H., Howey, D. A., Duncan, S., & Roinila, T. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3659482 · Cited by 4
Self-citation
Metadata
- Authors
- Hallemans, N., Courtier, N. E., Please, C. P., Planden, B., Dhoot, R., Timms, R., Chapman, S. J., Howey, D., & Duncan, S. R.
- ORCID
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2025-06-01
- Volume
- 172
- Issue
- 6
- Pages
- 060507
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W4410080786
- Cited by
- 34
- References
- 52
- Citations by year
- 2026: 23 · 2025: 11
- FWCI
- 8.28
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor, 4 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 4 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- arXiv (Cornell University) (submittedVersion, cc-by)
- arXiv (Cornell University) (cc-by)
- Funders
- HORIZON EUROPE Climate, Energy and Mobility (10038031)
- Faraday Institution (FIRG059)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
- Keywords
- electrochemical impedance spectroscopy, physics-based battery model, single particle model, Doyle-Fuller-Newman model, automatic differentiation, lithium-ion batteries, impedance modeling, state of charge
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Physics-Based Battery Model Parametrisation from Impedance Data. https://app.cochat.ai/papers/10.1149/1945-7111/add41b
- The paper
- Hallemans, N., Courtier, N. E., Please, C. P., Planden, B., Dhoot, R., Timms, R., Chapman, S. J., Howey, D., & Duncan, S. R. (2025). Physics-Based Battery Model Parametrisation from Impedance Data. Journal of The Electrochemical Society. https://doi.org/10.1149/1945-7111/add41b
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.