Effect of Current Density and Mass Loading on the Performance of a Flow-Through Electrodes Cell for Lithium Recovery
The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Due to the predicted increase of the lithium demand, its production will soon become outpaced by the market need. The current lithium-extraction techniques, which are based on the soda-lime evaporation process, are not only too slow to meet this increasing demand, but they also produce a large amount of chemical wastes. An alternative electrochemical technique, called "ion pumping", has been recently proposed. In this work, we are exploring the effect of the current density and the mass loading on the performance of a flow-through electrodes cell, which recovers lithium by means of electrochemical ion pumping from a 1 mM LiCl and a 100 mM NaCl solution. We observed that, by increasing the mass loading of the lithium-capturing electrode, a larger amount of lithium could be captured per unit mass. The same result was obtained when the applied current density was decreased. It is striking that, by choosing the right cell parameters, an almost complete capturing of lithium from the source solution has been reached.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium availability and future production outlooks
Vikström, H., Davidsson, S., & Höök, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.005 · Cited by 926
Flexer, V., Baspineiro, C. F., & Galli, C. I. (2018) · Science of the Total Environment · doi:10.1016/j.scitotenv.2018.05.223 · Cited by 768
Lithium recovery from salt lake brine by H 2 TiO 3
Chitrakar, R., Makita, Y., Ooi, K., & Sonoda, A. (2014) · Dalton Trans. · doi:10.1039/c4dt00467a · Cited by 345
Lithium: sources, production, uses, and recovery outlook
Talens Peiró, L., Villalba Méndez, G., & Ayres, R. U. (2013) · JOM · doi:10.1007/s11837-013-0666-4 · Cited by 318
Batteries for lithium recovery from brines
Pasta, M., Battistel, A., & La Mantia, F. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22977c · Cited by 278
Lithium extraction from Chinese salt-lake brines: opportunities, challenges, and future outlook
Song, J. F., Nghiem, L. D., Li, X.-M., & He, T. (2017) · Environmental Science: Water Research & Technology · doi:10.1039/c7ew00020k · Cited by 269
Highly selective lithium recovery from brine using a λ-MnO2–Ag battery
Lee, J., Yu, S.-H., Kim, C., Sung, Y.-E., & Yoon, J. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50919b · Cited by 220
The time dimension and lithium resource constraints for electric vehicles
Kushnir, D., & Sandén, B. A. (2012) · Resources Policy · doi:10.1016/j.resourpol.2011.11.003 · Cited by 197
Trócoli, R., Erinmwingbovo, C., & La Mantia, F. (2017) · ChemElectroChem · doi:10.1002/celc.201600509 · Cited by 136
Marchini, F., Rubi, D., del Pozo, M., Williams, F. J., & Calvo, E. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11722 · Cited by 123
Synthesis and Adsorption Properties of Li1.6Mn1.6O4 Spinel
Xiao, J.-L., Sun, S.-Y., Wang, J., Li, P., & Yu, J.-G. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400691d · Cited by 115
He, L., Xu, W., Song, Y., Luo, Y., Liu, X., & Zhao, Z. (2018) · Global Challenges · doi:10.1002/gch2.201700079 · Cited by 113
Recovery of lithium from Urmia Lake by a nanostructure MnO 2 ion sieve
Zandevakili, S., Ranjbar, M., & Ehteshamzadeh, M. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.08.004 · Cited by 109
Cited by
Environmental impact of direct lithium extraction from brines
Vera, M. L., Torres, W. R., Galli, C. I., Chagnes, A., & Flexer, V. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00387-5 · Cited by 766
Electrochemical Methods for Lithium Recovery: A Comprehensive and Critical Review
Battistel, A., Palagonia, M. S., Brogioli, D., La Mantia, F., & Trócoli, R. (2020) · Advanced Materials · doi:10.1002/adma.201905440 · Cited by 504
Self-citationA review on lithium recovery using electrochemical capturing systems
Zavahir, S., Elmakki, T., Gulied, M., Ahmad, Z., Al-Sulaiti, L., Shon, H. K., Chen, Y., Park, H., Batchelor, B., & Han, D. S. (2021) · Desalination · doi:10.1016/j.desal.2020.114883 · Cited by 220
Lithium Recovery Using Electrochemical Technologies: Advances and Challenges
Wu, L., Zhang, C., Kim, S., Hatton, T. A., Mo, H., & Waite, T. D. (2022) · Water Research · doi:10.1016/j.watres.2022.118822 · Cited by 214
Nikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Metadata
- Authors
- Palagonia, M. S., Brogioli, D., & La Mantia, F.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2019
- Volume
- 166
- Issue
- 10
- Pages
- E286-E292
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2947625485
- Cited by
- 35
- References
- 13
- FWCI
- 2.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.