The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Separation of Charge Transfer and Contact Resistance in LiFePO4-Cathodes by Impedance Modeling
Abstract
Lithium iron phosphate is a promising candidate material for Li-Ion batteries. In this study, the rate determining processes are assessed in more detail in order to separate performance limiting factors. Electrochemical impedance spectroscopy (EIS) data of experimental LiFePO 4 /Lithium-cells are deconvoluted by the method of distribution of relaxation times (DRT), what necessitates a pre-processing of the capacitive branch. This results in a separation into cathode and anode polarization processes and in a proposition of a physically motivated equivalent circuit model. We identify three different polarization processes of the LiFePO 4 -cathode (i) solid state diffusion, (ii) charge transfer (cathode/electrolyte) and (iii) contact resistance (cathode/current collector). Our model is then applied to EIS data sets covering varied temperature (0° to 30°C) and state of charge (10% to 100%). Activation energy, polarization resistance and frequency range are determined separately for all cathode processes involved. Finally, the tape-casted LiFePO 4 –cathode sheet is modified in porosity, thickness and contact area between cathode/electrolyte and cathode/current collector by a calendering process. Charge transfer resistance and contact resistance respond readily in polarization and relaxation frequency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Numerical Methods for the Solution of Ill-Posed Problems
Tikhonov, A. N., Goncharsky, A. V., Stepanov, V. V., & Yagola, A. G. (1995) · doi:10.1007/978-94-015-8480-7 · Cited by 1,819
A Linear Kronig‐Kramers Transform Test for Immittance Data Validation
Boukamp, B. A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044210 · Cited by 880
Determination of the chemical diffusion coefficient of lithium in LiFePO4
Prosini, P. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00134-0 · Cited by 844
Schichlein, H., Müller, A. C., Voigts, M., Krügel, A., & Ivers-Tiffée, E. (2002) · Journal of Applied Electrochemistry · doi:10.1023/a:1020599525160 · Cited by 668
Self-citationLevi, M. D., & Aurbach, D. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp9701909 · Cited by 558
Studies on LiFePO4 as cathode material using impedance spectroscopy
Schmidt, J. P., Chrobak, T., Ender, M., Illig, J., Klotz, D., & Ivers‐Tiffée, E. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.121 · Cited by 501
Self-citationReaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries
Takahashi, M. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00064-4 · Cited by 452
Weese, J. (1992) · Computer Physics Communications · doi:10.1016/0010-4655(92)90132-i · Cited by 373
Sonn, V., Leonide, A., & Ivers‐Tiffée, E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2908860 · Cited by 360
Self-citationAnisotropy of Electronic and Ionic Transport in LiFePO[sub 4] Single Crystals
Amin, R., Balaya, P., & Maier, J. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2388240 · Cited by 316
LiFePO[sub 4] Synthesis Routes for Enhanced Electrochemical Performance
Franger, S., Le Cras, F., Bourbon, C., & Rouault, H. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1506962 · Cited by 290
Ionic/Electronic Conducting Characteristics of LiFePO[sub 4] Cathode Materials
Wang, C., & Hong, J. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2409768 · Cited by 258
Computer Simulations of the Impedance Response of Lithium Rechargeable Batteries
Doyle, M., Meyers, J. P., & Newman, J. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393162 · Cited by 211
Zaban, A., Zinigrad, E., & Aurbach, D. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9514279 · Cited by 205
Three-dimensional reconstruction of a composite cathode for lithium-ion cells
Ender, M., Joos, J., Carraro, T., & Ivers‐Tiffée, E. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.12.004 · Cited by 155
Self-citationRoscher, M. A., Vetter, J., & Sauer, D. U. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.024 · Cited by 56
Studies on LiFePO4 as Cathode Material in Li-Ion Batteries
Illig, J., Chrobak, T., Ender, M., Schmidt, J. P., Klotz, D., & Ivers‐Tiffée, E. (2010) · ECS Transactions · doi:10.1149/1.3505456 · Cited by 29
Self-citation
Cited by
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677
Deng, Z., Zhang, Z., Lai, Y., Liu, J., Li, J., & Liu, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.026304jes · Cited by 674
Impedance Analysis of Electrochemical Systems
Vivier, V., & Orazem, M. E. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00876 · Cited by 615
Modeling electrochemical impedance spectroscopy
Ciucci, F. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.12.003 · Cited by 498
Zhou, X., Huang, J., Pan, Z., & Ouyang, M. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.040 · Cited by 355
Metadata
- Authors
- Illig, J., Ender, M., Chrobak, T., Schmidt, J. P., Klotz, D., & Ivers-Tiffée, E.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2012
- Volume
- 159
- Issue
- 7
- Pages
- A952-A960
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2058228348
- Cited by
- 307
- References
- 20
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.