The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A Tutorial into Practical Capacity and Mass Balancing of Lithium Ion Batteries
Open accessAbstract
In a lithium ion battery, balancing of active materials is an essential requirement with respect to safety and cycle life. However, capacity oversizing of negative electrodes is associated with decrease of specific energy/energy density. In this work, the required trade-off between maximized specific energy and minimized risk of lithium plating is thoroughly investigated by evaluating underlying potential/voltage curves. The adjustment of targeted state of charge (SOC) for both, positive and the negative electrode, can be achieved by intentional selection of only two parameters: negative/positive electrode active mass ratio and charge cutoff voltage. For investigation and controlling reasons, specific charge capacity reveals to be a simple but effective tool to indirectly predict electrode potentials. While cell kinetics/overvoltage are influenced by both electrodes, specific capacity losses are affected by a single electrode. The latter only correlate with negative electrode's BET surface area as long as specific capacity losses of negative electrodes are higher compared to positive electrodes. Based on these insights, a more systematic performance and safety optimized handling of the trade-off between specific energy and safety risk can be realized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Self-citationCapacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Self-citationNiobium tungsten oxides for high-rate lithium-ion energy storage
Griffith, K. J., Wiaderek, K. M., Cibin, G., Marbella, L. E., & Grey, C. P. (2018) · Nature · doi:10.1038/s41586-018-0347-0 · Cited by 860
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Self-citationHoltstiege, F., Bärmann, P., Nölle, R., Winter, M., & Placke, T. (2018) · Batteries · doi:10.3390/batteries4010004 · Cited by 357
Self-citationHomann, G., Stolz, L., Nair, J., Laskovic, I. C., Winter, M., & Kasnatscheew, J. (2020) · Scientific Reports · doi:10.1038/s41598-020-61373-9 · Cited by 284
Self-citation
Metadata
- Authors
- Kasnatscheew, J., Placke, T., Streipert, B., Rothermel, S., Wagner, R., Meister, P., Laskovic, I. C., & Winter, M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 12
- Pages
- A2479-A2486
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2749315824
- Cited by
- 210
- References
- 2
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.