Fuel Cell Performance Implications of Membrane Electrode Assembly Fabrication with Platinum-Nickel Nanowire Catalysts
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Platinum-nickel nanowire (PtNiNW) catalysts have shown exceptionally high oxygen reduction mass activity in rotating disk electrode measurements. However, the ability to successfully incorporate PtNiNWs into high performance membrane electrode assemblies (MEAs) has been challenging due to their size, shape, density, dispersion characteristics, and corrosion-susceptible nickel core. We have investigated the impact of specific processing steps and electrode composition on observed fuel cell performance and electrochemical properties in order to optimize performance. We have found that nickel ion contamination is a major concern for PtNiNWs that can be addressed through ion exchange in fabricated/tested MEAs or by acid leaching of catalyst materials prior to MEA incorporation, with the latter being the more successful method. Additionally, decreased ionomer incorporation has led to the highest performance demonstrating 238 mA/mg Pt (0.9 V IR-free) for PtNiNWs (pre-leached to 80 wt% Pt) with 9 wt% ionomer incorporation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Stamenkovic, V. R., Mun, B. S., Mayrhofer, K. J. J., Ross, P. N., & Markovic, N. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0600476 · Cited by 974
Oxygen Reduction on Carbon-Supported Pt−Ni and Pt−Co Alloy Catalysts
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Radmilovic, V., Markovic, N. M., & Ross, P. N. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013442l · Cited by 954
Antolini, E., Salgado, J. R. C., & Gonzalez, E. R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.006 · Cited by 503
Mukerjee, S., Srinivasan, S., Soriaga, M. P., & McBreen, J. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100013a032 · Cited by 439
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Contaminant absorption and conductivity in polymer electrolyte membranes
Kelly, M. J., Fafilek, G., Besenhard, J. O., Kronberger, H., & Nauer, G. E. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.064 · Cited by 147
Cited by
Xiao, F., Wang, Y., Wu, Z., Chen, G., Yang, F., Zhu, S., Siddharth, K., Kong, Z., Lu, A., Li, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006292 · Cited by 614
Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges
Tellez-Cruz, M. M., Escorihuela, J., Solorza-Feria, O., & Compañ, V. (2021) · Polymers · doi:10.3390/polym13183064 · Cited by 414
Wang, M., Park, J. H., Kabir, S., Neyerlin, K. C., Kariuki, N. N., Lv, H., Stamenkovic, V. R., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01037 · Cited by 192
Self-citationGravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers
Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0091813jes · Cited by 81
Self-citationWang, G., Zou, L., Huang, Q., Zou, Z., & Yang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12382a · Cited by 81
Metadata
- Authors
- Mauger, S. A., Neyerlin, K. C., Alia, S. M., Ngo, C., Babu, S. K., Hurst, K. E., Pylypenko, S., Litster, S., & Pivovar, B. S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2018
- Volume
- 165
- Issue
- 3
- Pages
- F238-F245
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2790855358
- Cited by
- 44
- References
- 8
- FWCI
- 2.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.