Machine Fault Signature Analysis
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
The objective of this paper is to present recent developments in the field of machine fault signature analysis with particular regard to vibration analysis. The different types of faults that can be identified from the vibration signature analysis are, for example, gear fault, rolling contact bearing fault, journal bearing fault, flexible coupling faults, and electrical machine fault. It is not the intention of the authors to attempt to provide a detailed coverage of all the faults while detailed consideration is given to the subject of the rolling element bearing fault signature analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To obtain a diagnostic system with excellent sensitivity, the rules and membership functions can be tuned [155].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [155]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Noise and Vibration Analysis for Engineers
Norton, M. P., & Karczub, D. G. (2003) · Cambridge University Press eBooks · doi:10.1017/cbo9781139163927 · Cited by 709
Damage diagnosis using time series analysis of vibration signals
Sohn, H., & Farrar, C. R. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/3/304 · Cited by 569 · cited 1×
“Sohn and Farrar [20] have presented a procedure for damage detection and localization within a mechanical system solely based on the time series analysis of vibration data.”
BackgroundCondition monitoring and fault diagnosis of electrical machines-a review
Nandi, S., & Toliyat, H. A. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.799956 · Cited by 531 · cited 1×
“Nandi and Toliyat [10] present a review on condition monitoring and fault diagnosis of electrical machines.”
BackgroundGearbox fault detection using Hilbert and wavelet packet transform
Fan, X., & Zuo, M. J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.08.032 · Cited by 323 · cited 1×
“Fan and Zuo [40] proposed an effective method to extract modulating signal and to detect the early gear fault.”
MethodMonitoring and diagnosis of rolling element bearings using artificial neural networks
Alguindigue, I. E., Loskiewicz-Buczak, A., & Uhrig, R. E. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.222642 · Cited by 175 · cited 1×
“The neural network technology provides an attractive complement to traditional vibration analysis because of the potential of neural networks to operate in real-time mode and to handle data that may be distorted or noisy [29].”
BackgroundOcak, H., & Loparo, K. A. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00052-9 · Cited by 158 · cited 2×
“These three systems have been recognized as a robust and alternative to some of the classical modeling and control methods [24].”
BackgroundMethodFault Diagnosis of Rotating Machinery
Edwards, S., Lees, A. W., & Friswell, M. I. (1998) · The Shock and Vibration Digest · doi:10.1177/058310249803000102 · Cited by 151 · cited 1×
“[6] present a review on fault diagnosis of rotating machinery to provide a broad review of the state of the art in fault diagnosis techniques.”
BackgroundStatistical‐based or condition‐based preventive maintenance?
Mann, L., Saxena, A., & Knapp, G. M. (1995) · Journal of Quality in Maintenance Engineering · doi:10.1108/13552519510083156 · Cited by 149 · cited 2×
“Four artificial techniques have been widely applied as expert system, neural networks, fuzzy logic, and model-based systems [9].”
BackgroundMethodMechanical Fault Detection Based on the Wavelet De-Noising Technique
Lin, J., Zuo, M. J., & Fyfe, K. R. (2004) · Journal of vibration and acoustics · doi:10.1115/1.1596552 · Cited by 138 · cited 3×
“Gearbox and bearings are essential parts of many machineries [4].”
BackgroundInfluentialHandbook of Condition Monitoring: Techniques and Methodology
(1998) · Springer eBooks · doi:10.1007/978-94-011-4924-2 · Cited by 134 · cited 1×
“It is used to highlight periodicities that occur in the spectrum in the same manner as the spectrum is used to highlight periodic components occurring in the time domain [16].”
Method
Research works printed but not linked: 10
- Bloch H. P., 1983, Machinery Failure Analysis and Troubleshooting
- Amarnath M., 2004, Prediction of defects in antifriction bearings using vibration signal analysis, Journal of the Institution of Engineers India Part MC Mechanical Engineering Division, 85, 88
- Gupta A. K., 1996, Reliability Engineering and Terotechnology
- Wue T. K., 2004, On line fault detection and analysis of modern water hydraulic system, Journal of Institution of Engineers, 44, 41
- KordeA. On line condition monitoring of motors using electrical signature analysis Proceedings of the 4th International Conference on Engineering and Automation July-August 2000 Orlando Florida USA.
- LeiY. KireM. andKennyT. W. Statistical damage detection using time series analysis on a structural health monitoring benchmark problem Proceedings of the 9th International Conference on Applications of Statistics and Probability in Civil Engineering July 2003 San Francisco Calif USA.
- LeboldM. McClinticK. CampbellR. ByingtonC. andMaynardK. Review of vibration analysis method for gearbox diagnostic and prognostics Proceedings of the 54th Meeting of the Society for Machinery Failure Prevention Technology May 2000 Verginia Beach Va USA 623–634.
- PlengeM. LammeringR. WalzT. andEttemeyerA. Optical inspection techniques for vibration analysis and defect indication in railway Proceedings of the 16th WCNDT World Conference on NDT August-September 2004 Montreal Canada.
- JunP.andLiasM. F. A wavelet based method for extracting rolling element bearing vibration signal envelope Proceeding of the WSEAS International Conference on Computer Engineering and Applications January 2007 Gold Coast Australia 181–186.
- Duraisamy V., 2004, Comparative study of membership functions for design of fuzzy logic fault diagnosis system for single phase induction motor, Academic Open Internet Journal, 13, 1
Cited by
Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges
Tchakoua, P., Wamkeue, R., Ouhrouche, M., Slaoui-Hasnaoui, F., Tameghe, T., & Ekemb, G. (2014) · Energies · doi:10.3390/en7042595 · Cited by 604
“Optical pyrometers, resistant thermometers, and thermocouples are a subset of the sensors used in TM [70].”
BackgroundGearbox Fault Identification and Classification with Convolutional Neural Networks
Chen, Z., Li, C., & Sanchez, R.-V. (2015) · Shock and Vibration · doi:10.1155/2015/390134 · Cited by 391
“Of the above the diagnostic by vibrations is the most employed for the reason that every machine is considered to have a normal spectrum until there is a fault, where the spectrum changes [13, 14].”
BackgroundVibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“To obtain a diagnostic system with excellent sensitivity, the rules and membership functions can be tuned [155].”
BackgroundTribological challenges and advancements in wind turbine bearings: A review
Dhanola, A., & Garg, H. C. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2020.104885 · Cited by 154
Tran, M., Amer, M., Dababat, A., Abdelaziz, A. Y., Dai, H.-J., Liu, M., & Elsisi, M. (2022) · Measurement · doi:10.1016/j.measurement.2022.112398 · Cited by 127
Jayaswal, P., Verma, S., & Wadhwani, A. (2011) · Journal of Vibration and Control · doi:10.1177/1077546310361858 · Cited by 116
“In this figure three peaks corresponding to ball defected frequency and its resonant frequencies are present, with other peaks due to the presence of background noise (Jayaswal et al., 2008b).”
BackgroundMethodSelf-citationXu, X., Huang, X., Bian, H., Wu, J., Chen, L., & Cong, F. (2023) · Energy and AI · doi:10.1016/j.egyai.2023.100318 · Cited by 93
Helical gear wear monitoring: Modelling and experimental validation
Brethee, K. F., Zhen, D., Gu, F., & Ball, A. D. (2017) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2017.07.012 · Cited by 120
A review of condition-based maintenance decision-making
Ahmad, R., & Kamaruddin, S. (2012) · European J of Industrial Engineering · doi:10.1504/ejie.2012.048854 · Cited by 86
“PM strategy involves maintenance before failure occurs; thus, the costs of unexpected failure, such as production delays and product quality rejects, are avoided or at least minimised (Gertsbakh, 1977; Lofsten, 1999; Jayaswal et al., 2008).”
BackgroundMulti-layer neural network with deep belief network for gearbox fault diagnosis
Chen, Z., Li, C., & Sánchez, R. (2015) · Journal of Vibroengineering · doi:10.21595/jve.2015.16039 · Cited by 83
“Among above symptoms, the vibration analysis is the most commonly-used technique for the reason that every machine is considered to have a normal spectrum until there is a fault, where the spectrum changes [9, 10].”
Causes and failures classification of industrial electric motor
Bazurto, A. J., Quispe, E. C., & Mendoza, R. D. P. C. (2016) · IEEE ANDESCON · doi:10.1109/andescon.2016.7836190 · Cited by 73
“At this point, it is important to specify the definition of failure in an electrical machine, for example in [3] it is defined how change in any component of the machine that prevents proper operation.”
BackgroundInfluentialCondition based maintenance of bearings and gears for fault detection – A review
Kumar, S., Goyal, D., Dang, R. K., Dhami, S. S., & Pabla, B. S. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.12.219 · Cited by 73
Li, W., Liu, Y., Wang, S., Li, W., Liu, G., Zhao, J., Zhang, X., & Zhang, C. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.2993336 · Cited by 73
“and quality of products [5], especially for some high-precision devices [6].”
BackgroundJayaswal, P., Verma, S. N., & Wadhwani, A. K. (2010) · Journal of Quality in Maintenance Engineering · doi:10.1108/13552511011048922 · Cited by 67
“A major advantage of the wavelets transform is that this method can exhibit the local features of the signals and give account of distribution of energy over frequencies which changes from one instant to the next ( Jayaswal et al. , 2008b”
MethodSelf-citationAgrawal, P., & Jayaswal, P. (2019) · Journal of The Institution of Engineers (India) Series C · doi:10.1007/s40032-019-00519-9 · Cited by 65
Self-citationRibeiro, R. F., Areias, I. A. D. S., Campos, M. M., Teixeira, C. E., da Silva, L. E. B., & Gomes, G. F. (2022) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-022-00501-3 · Cited by 67
Evaluation of Hand-Crafted Feature Extraction for Fault Diagnosis in Rotating Machinery: A Survey
Sánchez, R., Macancela, J.-C., Ortega, L.-R., Cabrera, D. R., Márquez, F. P. G., & Cerrada, M. (2024) · Sensors · doi:10.3390/s24165400 · Cited by 54
“In the case of rotating machinery, this may include vibration monitoring, which is the measurement of vibrations generated by the operation of the machine and the most widely used condition indicator for the diagnosis of machine faults [80–82].”
MethodA review of concepts and methods for wind turbines condition monitoring
Tchakoua, P., Wamkeue, R., Tameghe, T. A., & Ekemb, G. (2013) · World Congress on Computer and Information Technology (WCCIT) · doi:10.1109/wccit.2013.6618706 · Cited by 49
“Optical pyrometers, resistant thermometers and thermocouples are some of the sensors used in TM [41].”
BackgroundMachine condition prognosis based on sequential Monte Carlo method
Caesarendra, W., Niu, G., & Yang, B. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.07.014 · Cited by 48
Bearing Fault Diagnosis of Induction Motor Using Thermal Imaging
Choudhary, A., Letha, S. S., & Akula, A. (2018) · International Conference on Computing, Power and Communication Technologies (GUCON) · doi:10.1109/gucon.2018.8674889 · Cited by 42
“[4].”
Anti-theft energy metering for smart electrical distribution system
Hashmi, M. U., & Priolkar, J. (2015) · International Conference on Industrial Instrumentation and Control · doi:10.1109/iic.2015.7150972 · Cited by 36
Xue, H., Li, Z., Wang, H., & Chen, P. (2014) · Shock and Vibration · doi:10.1155/2014/407570 · Cited by 38
Using a fuzzy logic approach for the predictive maintenance of textile machines
Băban, C. F., Băban, M., & Șuteu, M. D. (2015) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/ifs-151822 · Cited by 31
Harichandran, A., Raphael, B., & Mukherjee, A. (2022) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12848 · Cited by 30
“Any type of change in the part or component of the machinery that prevents it from satisfactorily performing its intended function is termed a machine fault (Jayaswal et al., 2008).”
BackgroundJayaswal, P., & Wadhwani, A. K. (2009) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2009.11464588 · Cited by 30
Self-citationJagtap, H. P., Bewoor, A. K., & Kumar, R. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2020.104442 · Cited by 27
Classification prognostics approaches in aviation
Baptista, M. L., Henriques, E. M. P., & Prendinger, H. (2021) · Measurement · doi:10.1016/j.measurement.2021.109756 · Cited by 27
“In the context of prognostics, fault can be defined as any change in the nominal operation of a system that makes it unable to perform its function satisfactorily or unavailable to meet its functional requirements [32].”
BackgroundTritschler, N., Dugenske, A., & Kurfess, T. R. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4049845 · Cited by 22
Classification of unbalance and misalignment faults in rotor using multi-axis time domain features
Tahir, M. M., Hussain, A., Badshah, S., Khan, A. Q., & Iqbal, N. (2016) · International Conference on Emerging Technologies · doi:10.1109/icet.2016.7813273 · Cited by 21
“A variety of machine condition monitoring methods are being used, which mainly include mechanical measurements, electrical measurements, performance and process measurements, tribology and non-destructive testing [2].”
BackgroundDetection and Characterization of Bearing Faults from the Frequency Domain Features of Vibration
Arun, P., Lincon, S. A., & Prabhakaran, N. (2017) · IETE Journal of Research · doi:10.1080/03772063.2017.1369369 · Cited by 21
Condition-based diagnosis of mechatronic systems using a fractional calculus approach
Carvajal, R. E. G., de Melo, L. F., Rosário, J. M., & Machado, J. A. T. (2014) · International Journal of Systems Science · doi:10.1080/00207721.2014.978833 · Cited by 20
Detection of Emerging Faults on Industrial Gas Turbines Using Extended Gaussian Mixture Models
Zhang, Y., Bingham, C. M., Martínez-García, M., & Cox, D. (2017) · International Journal of Rotating Machinery · doi:10.1155/2017/5435794 · Cited by 18
“Many feature extraction techniques have been reported and successfully applied, including the use of the Fast Fourier Transform (FFT) and Discrete Wavelet Transform (DWT), all involving elaborate time-frequency transforms [31, 32].”
MethodDaraz, A., Alabied, S., Smith, A. P., Gu, F., & Ball, A. D. (2018) · International Conference on Automation and Computing (ICAC) · doi:10.23919/iconac.2018.8749053 · Cited by 18
Optical power monitoring systems for offshore wind farms: A literature review
Mohanty, S., Ramasamy, A. K., Mohanty, A., Mohanty, P. P., Soudagar, M. E. M., Khan, T. M. Y., & Cüce, E. (2024) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2024.104029 · Cited by 15
Bouleux, G. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.018 · Cited by 15
Tchomeni, B. X., & Alugongo, A. A. (2021) · Applied Sciences · doi:10.3390/app11178132 · Cited by 14
“The breathing functions h1(t) and h2(t) are defined by [18]:”
BackgroundInfluentialMotor fault detection using sound signature and wavelet transform
Awada, E. A., Al-Qaisi, A., Radwan, E., & Nour, M. (2022) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v13.i1.pp247-255 · Cited by 14
Kumar, V. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.108200 · Cited by 14
Fault diagnosis of an automobile cylinder head using low frequency vibrational data
Taajobian, M., Mohammadzaheri, M., Doustmohammadi, M., Amouzadeh, A., & Emadi, M. (2018) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-018-0606-x · Cited by 13
“In general, signature is a term used for systematically derived information which characterise the state or condition of a system [18].”
BackgroundBăban, M., Băban, C. F., & Moisi, B. (2018) · International Conference on Methods and Models in Automation and Robotics · doi:10.1109/mmar.2018.8486144 · Cited by 12
“In a condition-based maintenance approach, different techniques, such as vibration, acoustic, lubricant or temperature monitoring, may be used to monitor the state of a system [1, 5, 6].”
BackgroundAdvancement of Fault Diagnosis and Detection Process in Industrial Machine Environment
Altaf, S., Mehmood, M., & Soomro, M. W. (2019) · Journal of Engineering Sciences · doi:10.21272/jes.2019.6(2).d1 · Cited by 10
Early Detection of Failure of Spiral Bevel Gears Used in Differential Gearbox
Bhavi, I. G., Patil, G. V., & Kuppast, V. V. (2021) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-021-01163-1 · Cited by 10
Machinery equipment early fault detection using Artificial Neural Network based Autoencoder
Dwiputranto, T. H., Setiawan, N. A., & Aji, T. B. (2017) · International Conference on Science and Technology (ICST) · doi:10.1109/icstc.2017.8011854 · Cited by 10
“One of the strategies to do predictive maintenance is by performing condition-based maintenance (CBM) to make the team be able to continuously monitor and analyze the equipment condition to create any necessary action plan before the problem becoming bigger and costly [6].”
BackgroundTomar, A. S., & Jayaswal, P. (2024) · Journal of The Institution of Engineers (India) Series C · doi:10.1007/s40032-023-01016-w · Cited by 9
Self-citationCASE STUDY: Failure analysis of induced draft fan after serious inspection by overlay welding
Hermawan, M. R., & Sonawan, H. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2020.104855 · Cited by 9
Ali, S., Waleed, M., & Lee, D. (2026) · Applied Sciences · doi:10.3390/app16136311 · Cited by 9
Yun, J.-W., Choi, S.-W., & Lee, E. (2025) · Energies · doi:10.3390/en18092295 · Cited by 8
Shin, K., & Lee, S. (2015) · Shock and Vibration · doi:10.1155/2015/561238 · Cited by 8
“Specifically, an overview of the principles and techniques of Gaussian time-series methods for fault detection in vibrating structures is given in [8]; some benefits and limitations of time-frequency analysis methods in machinery fault diagnosis are found in [9]; and various fault diagnosis methods for rolling contact…”
MethodBearing Fault Signal Analysis Based on an Adaptive Multiscale Combined Morphological Filter
Lv, C. J., Zhang, P., Wu, D., Li, B., & Zhang, Y. (2020) · International Journal of Rotating Machinery · doi:10.1155/2020/7567439 · Cited by 8
“To test the effect of the proposed adaptive multiscale combined morphological filter, a simulation signal is created for filtering research, which is shown in Equation (21): x tð Þ = x1 tð Þ + xn tð Þ: ð21Þ In Equation (21), x1ðtÞ is a periodic pulse attenuation signal with a frequency of 60Hz and a weekly attenuation…”
MethodInfluentialPavlenko, I., Savchenko, I., Piteľ, J., Ivanov, V., & Рубан, А. И. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-91327-4_51 · Cited by 10
Explaining Probabilistic Fault Diagnosis and Classification Using Case-Based Reasoning
Olsson, T., Gillblad, D., Funk, P. J., & Xiong, N. (2014) · Lecture notes in computer science · doi:10.1007/978-3-319-11209-1_26 · Cited by 8
“Fault diagnosis is about detecting when a fault occurs, its location and thereafter identifying the fault type and severity [8, 9].”
BackgroundMethodDemir, H. G., & Yeşilyurt, İ. (2022) · Transactions of the Canadian Society for Mechanical Engineering · doi:10.1139/tcsme-2022-0052 · Cited by 8
Agrawal, P., & Jayaswal, P. (2020) · Lecture notes in mechanical engineering · doi:10.1007/978-981-15-3746-2_19 · Cited by 7
Self-citationInduction Machine Faults Leading to Occupational Accidents
Mrugalska, B. (2014) · Lecture notes in computer science · doi:10.1007/978-3-319-07509-9_23 · Cited by 6
Detection of bearing fault using Empirical Wavelet Transform and S Transform methods
Merainani, B., Bouzid, A. A., Ratni, A., & Benazzouz, D. (2020) · International Conference on Communications, Control Systems and Signal Processing (CCSSP) · doi:10.1109/ccssp49278.2020.9151834 · Cited by 6
“Generalized roughness, refers to unhealthy bearings with no visible defect, the vibration produced by this type of fault, is not associated with characteristic fault frequencies making its detection more complex [15].”
BackgroundPrakash, E., Siva Kumar, K., & Krishnamoorthi, M. K. (2013) · Cited by 6
Chiter, A., Zegadi, R., Bekka, R. E., & Felkaoui, A. (2018) · Journal of Theoretical and Applied Mechanics/Mechanika Teoretyczna i Stosowana · doi:10.15632/jtam-pl.56.1.123 · Cited by 6
“Particularly, the rolling bearing is one of the most critical components that determine machinery health and its remaining life time in modern production machinery (Jayaswal et al., 2008).”
BackgroundBarusu, M. R., Rani, N. G., Reddy, Y. V. S., & Reddy, G. P. R. (2023) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v15.i1.pp35-44 · Cited by 5
Vibration Analysis of Polytetrafluoroethylene (PTFE) Deep Groove Ball Bearing
Manjunath, A., & Girish, D. V. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/376/1/012137 · Cited by 5
Condition-Based Maintenance Modeling Using Vibration Signature Analysis
Gholap, A. B., & Jaybhaye, M. D. (2020) · Lecture notes in mechanical engineering · doi:10.1007/978-981-15-3746-2_10 · Cited by 5
Diagnosis of Mechanical Faults Affecting a Hydroelectric Group by Vibration Analysis
Bouaicha, M., Guerroum, M., Adraoui, I. E., Gziri, H., Elmahjoub, A. A., & Zegrari, M. (2021) · International Journal of Emerging Technology and Advanced Engineering · doi:10.46338/ijetae1121_11 · Cited by 5
Detection, localization, and identification of bearing faults on an ocean turbine
Waters, N., Beaujean, P.-P. J., & Vendittis, D. J. (2012) · MTS/IEEE OCEANS Conference (OCEANS) · doi:10.1109/oceans.2012.6404832 · Cited by 4
“Through trending of the vibrations produced under healthy operating conditions (as defined in [4][5]), one can establish a baseline for comparison and continuously monitor the health of their system [24].”
BackgroundMethodArun, P., Lincon, S. A., & Prabhakaran, N. (2018) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2018.1483468 · Cited by 5
Early Fault Detection by Vibration Measurement
Omar, D., Belal, M. H., & Gomaa, F. R. (2021) · International Journal of Engineering and Advanced Technology · doi:10.35940/ijeat.e2817.0610521 · Cited by 4
Envelope Spectrum Analysis of Noisy Signal with Spectral Kurtosis to Diagnose Bearing Defect
Tomar, A. S., & Jayaswal, P. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-4083-4_23 · Cited by 4
Self-citationCondition Monitoring of Wind Turbines: A Case Study of the Gibara II Wind Farm
Feliciano, Y. A., Trinchet-Varela, C. A., Lorente-Leyva, L. L., & Peluffo-Ordóñez, D. H. (2023) · Journal Européen des Systèmes Automatisés · doi:10.18280/jesa.560218 · Cited by 4
“It has been observed that monitoring component temperatures, particularly in the trunnion bearing where lubrication issues may arise, is closely associated with wear in machine components [23].”
BackgroundArchive of Mechanical Engineering
Lal, M., & Satapathy, M. (2018) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.24425/124485 · Cited by 4
“A review on various fault detection techniques is performed by authors of [8].”
BackgroundSURVEY OF GEAR FAULT DIAGNOSIS USING VARIOUS STATISTICAL SIGNALS PARAMETERS
Samuel, D. Y., Nabhan, A., & Mousa, M. O. (2022) · Journal of the Egyptian Society of Tribology /Journal of the Egyptian Society of Tribology · doi:10.21608/jest.2022.216105 · Cited by 4
Classification of rotary machine fault considering signal differences
Yu, H. T., Kim, H. J., Park, S. H., Kim, M. H., Jeon, I. S., & Choi, B. K. (2022) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-022-0101-2 · Cited by 4
“The fatigue of machines is often manifest by vibrations or changes in vibration patterns [12].”
BackgroundTargeting Faulty Bearings for an Ocean Turbine Dynamometer
Waters, N., Beaujean, P.-P. J., & Vendittis, D. J. (2020) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2013.v4i3.2152 · Cited by 4
Talib, M. F., Othman, M. F., & Azli, N. H. N. (2016) · Journal of Telecommunication Electronic and Computer Engineering (JTEC) · Cited by 3
Design and Development of Machine Fault Simulator (Mfs) for Fault Diagnosis
Nayak, C., & Pathak, V. K. (2015) · International Journal of Recent advances in Mechanical Engineering · doi:10.14810/ijmech.2015.4407 · Cited by 3
INVESTIGATION TO FAILURE ANALYSIS OF ROLLING ELEMENT BEARING WITH VARIOUS DEFECTS
Aherwar, A., Bajpai, R., & Khalid, S. (2012) · Cited by 3
Modal Structure Imbalance Fault Detection For Rotating Machines
Smith, B., & Zhao, Q. Z. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.09.724 · Cited by 3
Remote Monitoring of Industrial Systems Health
Moga, D., Dumitrean, M., Stroia, N., & Petreuș, D. M. (2010) · IFAC Proceedings Volumes · doi:10.3182/20101005-4-ro-2018.00050 · Cited by 3
BEARING'S EARLY FAULT DETECTION USING VIBRATION ANALYSIS
Eissa, M., Gomaa, F. R., & Khader, K. M. (2018) · The International Conference on Applied Mechanics and Mechanical Engineering · doi:10.21608/amme.2018.34974 · Cited by 3
Barrett, M. I. (2020) · International Symposium on Fundamentals of Electrical Engineering · doi:10.1109/isfee51261.2020.9756141 · Cited by 3
Root Cause Analysis of Acoustically Suspicious Transmissions During EOL Testing
Bischof, T. (2012) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2012-01-1528 · Cited by 2
Penanganan Lonjakan Vibrasi pada Rotor Elektrik Turbin di PLTU Gresik
Romdhon, A. G., Ilham, M., Astutik, R. P., & Irawan, D. (2020) · Journal of Applied Smart Electrical Network and Systems · doi:10.52158/jasens.v1i02.116 · Cited by 2
Khalid, R., Daud, M. Y. M., Bakhori, N. M., & Razali, R. (2025) · Environment-Behaviour Proceedings Journal · doi:10.21834/e-bpj.v10isi24.6378 · Cited by 2
“According to Jayaswal et al. (2008), machine failure brought on by progressive deterioration is related to wear and tear, stress fatigue, corrosion, and other factors.”
Diagnosis of industrial systems driven by electrical machines with a low cost platform
Munteanu, R. A., Moga, D., Petreuș, D. M., Stroia, N., Barabas, Z., & Hrebenciuc, F. A. (2011) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2011.6063675 · Cited by 2
“MCSA is a proven diagnostic process for condition monitoring of electric motor-driven mechanical equipment (pumps, motor-operated valves, compressors, and processing machinery) [ 7 ].”
BackgroundIrasari, P., Nugraha, A. S., & Kasim, M. (2012) · Mechatronics Electrical Power and Vehicular Technology · doi:10.14203/j.mev.2010.v1.19-26 · Cited by 2
Kočiško, M., Baron, P., Telíšková, M., Török, J., & Bašistová, A. (2019) · Advances in Materials Science and Engineering · doi:10.1155/2019/8148697 · Cited by 2
Different Machine Maintenance Techniques of Rotary Machine and Their Future Scopes: A Review
Saha, D. K., Ahmed, S., & Shaurov, M. S. (2019) · International Conference on Electrical Information and Communication Technology (EICT) · doi:10.1109/eict48899.2019.9068800 · Cited by 2
“Every frequency spectrum is related to a specific source within the machine [5].”
BackgroundFMECA Analysis and Condition Monitoring of Kneader in Green Anode Plant of an Aluminium Smelter
Mohanty, J. K., Hota, I., Sarkar, P., Sahu, A. K., Dash, P., & Pradhan, P. K. (2020) · Lecture notes in mechanical engineering · doi:10.1007/978-981-15-7779-6_26 · Cited by 2
Manarikkal, I., Elasha, F., Carri, A. D., Laila, D. S., & Mba, D. (2021) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-021-00372-0 · Cited by 1
Condition Monitoring of Spur Gears in Bottling Machines: A Review
Awoyemi, O. O., Azeta, J., Babalola, P. O., Salawu, E. Y., Akerekan, O. E., & Airewa, I. (2024) · International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) · doi:10.1109/seb4sdg60871.2024.10630292 · Cited by 1
“The operating temperature and the surface temperature of component parts are measured as part of temperature monitoring [81][85].”
Li, W., Xie, K., Zou, J., Huang, K., Mu, F., & Chen, L.-Y. (2024) · Applied Sciences · doi:10.3390/app14198643 · Cited by 1
Khaira, A., & Dwivedi, R. K. (2017) · International Journal of Engineering and Technology Innovation · Cited by 1
Analytical Study of the Effect of NaCl Solution on Fatigue Resistance of Rotating Shafts
obaid, S. H., Ahmed, A. N., & Ibrahim, H. R. (2020) · Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forum · doi:10.4028/www.scientific.net/ddf.398.147 · Cited by 1
“All of the above mentioned variables can affect the value of natural frequency of the rotating shaft system and may cause resonance with devices close to rotating shaft system [2, 3].”
BackgroundCondition Monitoring of Electrical Submersible Pumps (Faults Review)
Al-Hashmi, S. A. (2021) · Journal of Pure & Applied Sciences · doi:10.51984/jopas.v20i1.1070 · Cited by 1
Tomar, A. S., & Jayaswal, P. (2022) · Traitement du signal · doi:10.18280/ts.390616 · Cited by 1
“As a result, defect analysis is required to avoid bearing failure [2, 3].”
Self-citationFault Detection in Machine Bearings Using Deep Learning
Vaishnavi, A., Sharma, A., & Naidu, V. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-26-0473 · Cited by 1
A Data-Driven Approach to Remote Fault Diagnosis of Heavy-duty Machines
Olsson, T. (2015) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 1
Kerroumi, S. (2016) · theses.fr (ABES) · doi:10.70675/e3d3a9b3zec7ez47baz9e8bz7324a87d9939 · Cited by 11
Haqshenas, R. (2012) · MacSphere (McMaster University) · doi:10.71548/15156 · Cited by 1
Alyami, M. (2008) · ORCA Online Research @Cardiff (Cardiff University)
Hegde, V., Veena, S., Ravikumar, H. M., & Yellampalli, S. S. (2013) · International Conference on Circuits, Controls and Communications (CCUBE) · doi:10.1109/ccube.2013.6718553
Prakash, E., & Sivakumar, K. (2014) · International Journal of Nanoscience · doi:10.1142/s0219581x14500264
Metadata
- Authors
- Jayaswal, P., Wadhwani, A. K., & Mulchandani, K. B.
- Affiliations
- Madhav Institute of Technology & Science (IN)
- Indian Institute of Technology Roorkee (IN)
- Corresponding author
- Jayaswal, Pratesh
- Venue
- International Journal of Rotating Machinery
- Publisher
- Wiley
- Published
- 2008-01
- Volume
- 2008
- Issue
- 1
- ISSN
- 1023-621X (ISSN-L)
- 1542-3034
- OpenAlex
- W1992689987
- Cited by
- 111
- References
- 27
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 7 · 2023: 4 · 2022: 11 · 2021: 12 · 2020: 13 · 2019: 5 · 2018: 10 · 2017: 6 · 2016: 3 · 2015: 8 · 2014: 6 · 2013: 6 · 2012: 6
- FWCI
- 4.92
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Rotating Machinery (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Madhav Institute of Technology and Science
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- vibration analysis, gear failure, fault diagnosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.