The DOI matches its Crossref record.
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
Open accessAbstract
Using thermodynamic models is a desired method for predicting an equilibrium when occurring in a system. If a thermodynamic model can predict an equilibrium condition in a pyrolysis, for a new way will be open for scientists in predicting equilibrium in a reaction without need to kinetic models. In this work, low‐density polyethylene, polypropylene, and polyethylene terephthalate were used instead of feed of pyrolysis process. The process was maintained at 500°C with 5 different temperature raising ratios 6, 8, 10, 12, and 14. Then the process was modeled thermodynamically using NRTL activity coefficient model. Using this model, the binary interaction coefficients were investigated for the system of “char, oil, and gas.” Results showed that polyethylene and polypropylene produced the maximum liquid product. Calculated RMSD objective function was 0.0157; that it is acceptable for this process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
The influence of plastic pyrolysis oil on fuel lubricity and diesel engine performance
Pumpuang, A., Klinkaew, N., Wathakit, K., Sukhom, A., & Sukjit, E. (2024) · RSC Advances · doi:10.1039/d3ra08150h · Cited by 46
Metadata
- Authors
- FakhrHoseini, S. M., & Dastanian, M.
- Venue
- Journal of Chemistry
- Publisher
- Wiley
- Published
- 2013-01
- Volume
- 2013
- Issue
- 1
- ISSN
- 2090-9063 (ISSN-L)
- 2090-9071
- OpenAlex
- W2144728997
- Cited by
- 239
- References
- 0
- FWCI
- 0.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model. https://app.cochat.ai/papers/10.1155/2013/487676
- The paper
- FakhrHoseini, S. M., & Dastanian, M. (2013). Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model. Journal of Chemistry. https://doi.org/10.1155/2013/487676
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.