The DOI matches its Crossref record.
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
Open accessAbstract
Using thermodynamic models is a desired method for predicting an equilibrium when occurring in a system. If a thermodynamic model can predict an equilibrium condition in a pyrolysis, for a new way will be open for scientists in predicting equilibrium in a reaction without need to kinetic models. In this work, low‐density polyethylene, polypropylene, and polyethylene terephthalate were used instead of feed of pyrolysis process. The process was maintained at 500°C with 5 different temperature raising ratios 6, 8, 10, 12, and 14. Then the process was modeled thermodynamically using NRTL activity coefficient model. Using this model, the binary interaction coefficients were investigated for the system of “char, oil, and gas.” Results showed that polyethylene and polypropylene produced the maximum liquid product. Calculated RMSD objective function was 0.0157; that it is acceptable for this process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Potential of pyrolysis processes in the waste management sector
Czajczyńska, D., Anguilano, L., Ghazal, H., Krzyżyńska, R., Reynolds, A. J., Spencer, N., & Jouhara, H. (2017) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2017.06.003 · Cited by 531
Pyrolysis of Polystyrene Waste: A Review
Maafa, I. (2021) · Polymers · doi:10.3390/polym13020225 · Cited by 311
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
The Chemistry and Kinetics of Polyethylene Pyrolysis: A Process to Produce Fuels and Chemicals
Zhao, D., Wang, X., Miller, J. B., & Huber, G. W. (2020) · ChemSusChem · doi:10.1002/cssc.201903434 · Cited by 259
Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149911 · Cited by 255
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
The influence of plastic pyrolysis oil on fuel lubricity and diesel engine performance
Pumpuang, A., Klinkaew, N., Wathakit, K., Sukhom, A., & Sukjit, E. (2024) · RSC Advances · doi:10.1039/d3ra08150h · Cited by 46
“5,15,16 PS is the polymer that has a structure consisting of a long hydrocarbon chain with a phenyl group attached to every other carbon atom.”
BackgroundEffects of volatiles on properties of char during sequential pyrolysis of PET and cellulose
Li, C., Sun, Y., Li, Q., Zhang, L., Zhang, S., Wang, H., Hu, G., & Hu, X. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.02.091 · Cited by 44
Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Zabaniotou, A., & Vaskalis, I. (2023) · Energies · doi:10.3390/en16020593 · Cited by 29
Chasioti, A., & Zabaniotou, A. (2024) · Sustainability · doi:10.3390/su16145852 · Cited by 15
Metadata
- Authors
- FakhrHoseini, S. M., & Dastanian, M.
- Venue
- Journal of Chemistry
- Publisher
- Wiley
- Published
- 2013-01
- Volume
- 2013
- Issue
- 1
- ISSN
- 2090-9063 (ISSN-L)
- 2090-9071
- OpenAlex
- W2144728997
- Cited by
- 239
- References
- 0
- FWCI
- 0.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.