The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Multiple-Fault Detection Methodology Based on Vibration and Current Analysis Applied to Bearings in Induction Motors and Gearboxes on the Kinematic Chain
Open accessAbstract
Gearboxes and induction motors are important components in industrial applications and their monitoring condition is critical in the industrial sector so as to reduce costs and maintenance downtimes. There are several techniques associated with the fault diagnosis in rotating machinery; however, vibration and stator currents analysis are commonly used due to their proven reliability. Indeed, vibration and current analysis provide fault condition information by means of the fault-related spectral component identification. This work presents a methodology based on vibration and current analysis for the diagnosis of wear in a gearbox and the detection of bearing defect in an induction motor both linked to the same kinematic chain; besides, the location of the fault-related components for analysis is supported by the corresponding theoretical models. The theoretical models are based on calculation of characteristic gearbox and bearings fault frequencies, in order to locate the spectral components of the faults. In this work, the influence of vibrations over the system is observed by performing motor current signal analysis to detect the presence of faults. The obtained results show the feasibility of detecting multiple faults in a kinematic chain, making the proposed methodology suitable to be used in the application of industrial machinery diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





























Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“ey found that the proposed method can perfectly detect the presence of wear at low operating frequencies but is not suitable at high operating frequencies.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“According to Saucedo-Dorantes et al. [8], the percentage of fault diagnosis techniques conducted with the means of vibration analysis exceeds 82%.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [8]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Bearing Health Monitoring Based on Hilbert–Huang Transform, Support Vector Machine, and Regression
Soualhi, A., Medjaher, K., & Zerhouni, N. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2330494 · Cited by 665 · cited 1×
“For instance, in [28], a single fault in bearings is diagnosed and detected using HHT and Support Vector Machines (SVM) applied to the vibration signal.”
MethodTrends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“In many applications, induction motors are connected to gearboxes [7, 8], and it is important to identify faulty conditions at an early stage while these elements are under operation along with the related kinematic chain.”
BackgroundAn Artificial Neural Network Approach for Early Fault Detection of Gearbox Bearings
Bangalore, P., & Tjernberg, L. B. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2386305 · Cited by 339 · cited 1×
“In gearboxes, however, the possibility of gear fault appearing is lower, around 26%, but an early stage fault, as uniform wear, may cause severe consequences [9, 10].”
BackgroundReview of Automatic Fault Diagnosis Systems Using Audio and Vibration Signals
Henriquez, P., Alonso, J. B., Ferrer, M. A., & Travieso, C. M. (2014) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmcc.2013.2257752 · Cited by 314 · cited 2×
“In gearboxes, however, the possibility of gear fault appearing is lower, around 26%, but an early stage fault, as uniform wear, may cause severe consequences [9, 10].”
BackgroundLeite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274
Frosini, L., Harlisca, C., & Szabo, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2361115 · Cited by 264 · cited 1×
“has been used and reported in different studies [5, 11], and the artificial damaged bearingmodel 6205-2ZNR used in this experimentation is shown in Figure 5.”
MethodNiu, G., Yang, B.-S., & Pecht, M. (2010) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2010.02.016 · Cited by 257 · cited 1×
“This topic has attracted the attention of many researchers over the last few years [1, 2], emphasizing the necessity of health monitoring and maintenance procedures in manufacturing operations in order to ensure equipment availability, product quality, ontime deliveries, and plant safety [3–6].”
BackgroundCNC machine tool's wear diagnostic and prognostic by using dynamic Bayesian networks
Tobon-Mejia, D. A., Medjaher, K., & Zerhouni, N. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.10.018 · Cited by 237
Vibration Spectrum Imaging: A Novel Bearing Fault Classification Approach
Amar, M., Gondal, I., & Wilson, C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327555 · Cited by 222
Cited by
Fault diagnosis of single-phase induction motor based on acoustic signals
Glowacz, A. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.07.044 · Cited by 351
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“According to Saucedo-Dorantes et al. [8], the percentage of fault diagnosis techniques conducted with the means of vibration analysis exceeds 82%.”
MethodDiagnosis of the three-phase induction motor using thermal imaging
Glowacz, A., & Glowacz, Z. (2017) · Infrared Physics & Technology · doi:10.1016/j.infrared.2016.12.003 · Cited by 239
Tran, M.-Q., Elsisi, M., Mahmoud, K., Liu, M.-K., Lehtonen, M., & Darwish, M. M. F. (2021) · IEEE Access · doi:10.1109/access.2021.3105297 · Cited by 158
“signature analysis (MCSA) is considered because of its lowcost, non-intrusive, and fast installation [7], [8].”
BackgroundHuang, W., Gao, G., Li, N., Jiang, X., & Zhu, Z. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2868519 · Cited by 155
Metadata
- Authors
- Saucedo-Dorantes, J. J., Delgado-Prieto, M., Ortega-Redondo, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J.
- Affiliations
- CA Mecatronica, Facultad de Ingenieria, Campus San Juan del Rio, Universidad Autónoma de Querétaro, Rio Moctezuma 249, Colonia San Cayetano, 76807 San Juan del Rio, QRO, Mexico
- Universitat Politècnica de Catalunya (ES)
- Technical University of Catalonia (UPC), Department of Electronic Engineering, MCIA Research Center, Rambla San Nebridi No. 22, Gaia Research Building, 08222 Terrassa, Spain
- Autonomous University of Queretaro (MX)
- CA Procesamiento Digital de Señales, CA Telematica, Division de Ingenierias, Campus Irapuato-Salamanca, Universidad de Guanajuato, Carretera Salamanca-Valle km 3.5 + 1.8, Comunidad de Palo Blanco, 36700 Salamanca, GTO, Mexico
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2016
- Volume
- 2016
- Pages
- 1-13
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W2296231270
- Cited by
- 80
- References
- 38
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 9 · 2023: 12 · 2022: 14 · 2021: 12 · 2020: 4 · 2019: 5 · 2018: 16 · 2017: 1 · 2016: 2
- FWCI
- 6.73
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- RECERCAT (Consorci de Serveis Universitaris de Catalunya) (publishedVersion, other-oa)
- UPCommons institutional repository (Universitat Politècnica de Catalunya) (publishedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- Funders
- Consejo Nacional de Ciencia y Tecnología (278033, 222453-2013)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- multiple fault detection, bearing fault diagnosis, induction motor, motor current signature analysis, vibration analysis, kinematic chains, rotating machinery condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multiple-Fault Detection Methodology Based on Vibration and Current Analysis Applied to Bearings in Induction Motors and Gearboxes on the Kinematic Chain. https://app.cochat.ai/papers/10.1155/2016/5467643
- The paper
- Saucedo-Dorantes, J. J., Delgado-Prieto, M., Ortega-Redondo, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J. (2016). Multiple-Fault Detection Methodology Based on Vibration and Current Analysis Applied to Bearings in Induction Motors and Gearboxes on the Kinematic Chain. Shock and Vibration. https://doi.org/10.1155/2016/5467643
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.