Bacterial Adhesion and Surface Roughness for Different Clinical Techniques for Acrylic Polymethyl Methacrylate
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This study sought to assess the effect of different surface finishing and polishing protocols on the surface roughness and bacterial adhesion (S. sanguinis) to polymethyl methacrylates (PMMA). Fifty specimens were divided into 5 groups (n=10) according to their fabrication method and surface finishing protocol: LP (3 : 1 ratio and laboratory polishing), NF (Nealon technique and finishing), NP (Nealon technique and manual polishing), MF (3 : 1 ratio and manual finishing), and MP (3 : 1 ratio and manual polishing). For each group, five specimens were submitted to bacterial adhesion tests and analyzed by scanning electron microscopy (SEM). Two additional specimens were subjected to surface topography analysis by SEM and the remaining three specimens were subjected to surface roughness measurements. Data were compared by one-way ANOVA. The mean bacterial counts were as follows: NF,19.6±3.05; MP,5.36±2.08; NP,4.96±1.93; MF,7.36±2.45; and LP,1.56±0.62(CFU). The mean surface roughness values were as follows: NF,3.23±0.15; MP,0.52±0.05; NP,0.60±0.08; MF,2.69±0.12; and LP,0.07±0.02(μm). A reduction in the surface roughness was observed to be directly related to a decrease in bacterial adhesion. It was verified that the laboratory processing of PMMA might decrease the surface roughness and consequently the adhesion of S. sanguinis to this material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bollenl, C. M. L., Lambrechts, P., & Quirynen, M. (1997) · Dental Materials · doi:10.1016/s0109-5641(97)80038-3 · Cited by 1,911 · cited 3×
“It has been hypothesized that the subsequent proliferation of the initial adhering microorganisms is largely due to microbial mass increase during early plaque formation and may explain the importance of surface roughness in initial plaque formation [2].”
Background
Cited by
Hydrodynamics and surface properties influence biofilm proliferation
Krsmanovic, M., Biswas, D., Ali, H., Kumar, A., Ghosh, R., & Dickerson, A. K. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102336 · Cited by 285
A sterilization method for decellularized xenogeneic cardiovascular scaffolds
Fidalgo, C., Iop, L., Sciro, M., Harder, M., Mavrilas, D., Korossis, S., Bagno, A., Palù, G., Aguiari, P., & Gerosa, G. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.035 · Cited by 71
Bacteria co-culture adhesion on different texturized zirconia surfaces
Dantas, T., Padrão, J., da Silva, M. R., Pinto, P., Madeira, S., Vaz, P., Zille, A., & Silva, F. (2021) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2021.104786 · Cited by 26
Self-citation
Metadata
- Authors
- Dantas, L. C. D. M., Silva-Neto, J. P. D., Dantas, T. S., Naves, L. Z., das Neves, F. D., & da Mota, A. S.
- Venue
- International Journal of Dentistry
- Publisher
- Wiley
- Published
- 2016
- Volume
- 2016
- Pages
- 1-6
- ISSN
- 1687-8728 (ISSN-L)
- 1687-8736
- OpenAlex
- W2488213552
- Cited by
- 93
- References
- 1
- FWCI
- 10.28
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bacterial Adhesion and Surface Roughness for Different Clinical Techniques for Acrylic Polymethyl Methacrylate. https://app.cochat.ai/papers/10.1155/2016/8685796
- The paper
- Dantas, L. C. D. M., Silva-Neto, J. P. D., Dantas, T. S., Naves, L. Z., das Neves, F. D., & da Mota, A. S. (2016). Bacterial Adhesion and Surface Roughness for Different Clinical Techniques for Acrylic Polymethyl Methacrylate. International Journal of Dentistry. https://doi.org/10.1155/2016/8685796
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.