CoChat

Study on the Bond-Slip Performance of CFSSTs Based on Push-Out Tests

Open access
Wang, Lai, Chen, Haitao, Zhong, Jitao, Chen, Huirong, Xuan, Wei, Mi, Shuai, Yang, Hongyan · 2018 · Advances in Materials Science and Engineering

The DOI matches its Crossref record; 12 of the 13 references it cites were found in a registry or an index.

Abstract

To study the interfacial bond‐slip performance of concrete‐filled square steel tubes (CFSSTs), taking the core concrete strength, slenderness ratio, and width‐to‐thickness ratio as the influencing factors; 9 specimens were designed with 3 factors and 3 levels for the orthogonal test method. In addition, different from the above 9 specimens, one specimen without rust removal was designed for the purpose of comparison. Based on the bond stress distribution and deformation coordination relationships between the specimens during the push‐out tests, a theoretical formula for calculating the relative slip of a CFSST was deduced. The results show that with the increase of load, the relative slip at the loading ends was earlier than that at the free ends of the specimens; the interfacial bond failure and relative slip gradually developed from the two ends towards the centre of the specimens; the increase of the bond stress in the middle part was faster than that at the ends of the specimens. The order of these factors from main to secondary is the presence of rust in the inner wall of the square steel tube, the slenderness ratio, the core concrete strength, and the width‐to‐thickness ratio.

Overview

Integrity signals

Registry

Crossref · 10.1155/2018/2959827

Cites

12 of 12 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 12 references

Research works printed but not linked: 15

  1. Linhai H., 2007, Modern Concrete Filled Steel Tubular Structures, 263
  2. Lihua C., 2016, Review analysis on study of bond behavior of concrete-filled steel tube, Building Structure, 46, 78
  3. Shakir-Khalil H., 1993, Push-out strength of concrete-filled steel hollow sections, Structural Engineer, 71, 230
  4. Xiliang K., 2006, Summary and analysis of bond slip of concrete filled steel tube, Journal of Xi’an University of Architecture and Technology, 38, 321
  5. Virdi K. S., 1975, CESLIC Report CC11
  6. Lihong X., 1996, Bond strength of composite interface of concrete filled steel tubular column (top), Building Science, 12, 22
  7. Lihong X., 1996, Bond strength of composite interface of concrete-filled steel tube column: (under), Building Science, 12, 19
  8. Yongjian L., 2006, Push-out test on shear bond strength of CFST, Industrial Construction, 36, 78
  9. Jianbin W., 2007, Experimental study on bond-slip behavior between steel and concrete in square concrete filled steel structures, Building Structure, 37, 74
  10. Yong-jian L., 2007, Bond-slip mechanics behaviors of structures concrete filled steel tubes, Journal of Chang’an University, 27, 53
  11. National Standards of the People’s Republic of China, 2011, Preparation of Steel Substrates before Application of Paints and Related Products-Visual Assessment of Surface Cleanliness-Part 1: Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates after Overall Removal of Previous Coatings, GB/T 8923.1-2011
  12. National Standards of the People’s Republic of China, 2010, Metallic Materials-Tensile Testing-Part 1: Method of Test at Room Temperature, GB/T 228.1-2010
  13. Profession Standard of the People’s Republic of China, 2011, Specification for Mix Proportion Design of Ordinary Concrete, JGJ 55-2011
  14. National Standards of the People’s Republic of China, 2003, Standard for Test Method of Mechanical Properties on Ordinary Concrete, GB/T 50081-2002
  15. Shaohuai C., 2007, Modern Steel Tube Confined Concrete Structures, 230

Cited by

Metadata

Authors
Wang, L., Chen, H., Zhong, J., Chen, H., Xuan, W., Mi, S., & Yang, H.
Affiliations
Shandong University of Science and Technology (CN)
Corresponding author
Chen, Haitao
Venue
Advances in Materials Science and Engineering
Publisher
Wiley
Published
2018-01
Volume
2018
Issue
1
ISSN
  • 1687-8434 (ISSN-L)
  • 1687-8442
OpenAlex
W2790169821
Cited by
13
References
13
Citations by year
2025: 2 · 2024: 4 · 2023: 2 · 2022: 3 · 2021: 1 · 2020: 1
FWCI
0.45
Type
journal article
Language
en
Open access
Locations
  • Advances in Materials Science and Engineering (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Shandong University of Science and Technology (YC150215)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis
  • Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Materials Analysis
Keywords
bond-slip behavior, push-out test, bond stress distribution, relative slip, slenderness ratio, width-to-thickness ratio, steel-concrete interface

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.