Study on the Bond-Slip Performance of CFSSTs Based on Push-Out Tests
Open accessThe DOI matches its Crossref record; 12 of the 13 references it cites were found in a registry or an index.
Abstract
To study the interfacial bond‐slip performance of concrete‐filled square steel tubes (CFSSTs), taking the core concrete strength, slenderness ratio, and width‐to‐thickness ratio as the influencing factors; 9 specimens were designed with 3 factors and 3 levels for the orthogonal test method. In addition, different from the above 9 specimens, one specimen without rust removal was designed for the purpose of comparison. Based on the bond stress distribution and deformation coordination relationships between the specimens during the push‐out tests, a theoretical formula for calculating the relative slip of a CFSST was deduced. The results show that with the increase of load, the relative slip at the loading ends was earlier than that at the free ends of the specimens; the interfacial bond failure and relative slip gradually developed from the two ends towards the centre of the specimens; the increase of the bond stress in the middle part was faster than that at the ends of the specimens. The order of these factors from main to secondary is the presence of rust in the inner wall of the square steel tube, the slenderness ratio, the core concrete strength, and the width‐to‐thickness ratio.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Researchers have found that the diameter-to-thickness ratio of the UHPC-FST specimens had the greatest impact on the interfacial bond performance of the specimens, and an increase in the steel fiber content improved the interfacial bond strength of UHPC-FSTCs.”
From Bond-Slip Performances of Ultra-High Performance Concrete Steel Tube Columns Made of a Large-Diameter Steel Tube with Internally Welded Steel Bars (2023) · cites this paper as [27]
In the citing paper
“Researchers have found that the diameter-to-thickness ratio of the UHPC-FST specimens had the greatest impact on the interfacial bond performance of the specimens, and an increase in the steel fiber content improved the interfacial bond strength of UHPC-FSTCs.”
From Bond-Slip Performances of Ultra-High Performance Concrete Steel Tube Columns Made of a Large-Diameter Steel Tube with Internally Welded Steel Bars (2023) · cites this paper as [27]
Citations
Cites
Post-fire bond between the steel tube and concrete in concrete-filled steel tubular columns
Tao, Z., Han, L.-H., Uy, B., & Chen, X. (2011) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2010.09.006 · Cited by 152
Design and Construction of Concrete-Filled Steel Tube Column System in Japan
Morino, S., & TSUDA, K. (2003) · Cited by 139
Xu, C., Chengkui, H., Decheng, J., & Yuancheng, S. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.021 · Cited by 130
Bond-slip behaviour of concrete-filled stainless steel circular hollow section tubes
Chen, Y., Feng, R., Shao, Y., & Zhang, X. (2017) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2016.12.012 · Cited by 111
Experimental studies on the behavior of concrete-filled steel tubes incorporating crumb rubber
Abendeh, R. M., Ahmad, H. S., & Hunaiti, Y. M. (2016) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2016.03.022 · Cited by 103
Bond strength in concrete filled steel tubes
Virdi, K. S., & Dowling, P. J. (1980) · IABSE · doi:10.5169/seals-34958 · Cited by 81
Load-reversed push-out tests on rectangular CFST columns
Qu, X., Chen, Z., Nethercot, D. A., Gardner, L., & Theofanous, M. (2012) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2012.11.003 · Cited by 73
Refining bond-slip constitutive relationship between checkered steel tube and concrete
Chen, L., Dai, J., Jin, Q., Chen, L., & Liu, X. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.058 · Cited by 61
Push-out tests and bond strength of rectangular CFST columns
Qu, X., Chen, Z., Nethercot, D. A., Gardner, L., & Theofanous, M. (2015) · Steel and Composite Structures · doi:10.12989/scs.2015.19.1.021 · Cited by 49
Shear transfer mechanisms in composite columns: an experimental study
De Nardin, S., & El Debs, A. L. H. C. (2007) · Steel and Composite Structures · doi:10.12989/scs.2007.7.5.377 · Cited by 36 · cited 2×
“[18] and Nardin and El Debs [19] show that the longitudinal strain of a steel tube is exponentially distributed along the length direction.”
BackgroundExperiment Study on Interfacial Normal Bond Strength of Concrete Filled Steel Tube
Liu, Z. Y. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.594-597.947 · Cited by 10 · cited 1×
“Liu [20] discovers through experimental studies that the strength of core concrete has no obvious influence on the bond strength of CFSTs.”
BackgroundTHEORETICAL ANALYSIS OF BOND-SLIP CONSTITUTIVE RALATIONSHIP FOR CFST
Xi-liang, K. (2009) · Engineering Mechanics · Cited by 5
Research works printed but not linked: 15
- Linhai H., 2007, Modern Concrete Filled Steel Tubular Structures, 263
- Lihua C., 2016, Review analysis on study of bond behavior of concrete-filled steel tube, Building Structure, 46, 78
- Shakir-Khalil H., 1993, Push-out strength of concrete-filled steel hollow sections, Structural Engineer, 71, 230
- Xiliang K., 2006, Summary and analysis of bond slip of concrete filled steel tube, Journal of Xi’an University of Architecture and Technology, 38, 321
- Virdi K. S., 1975, CESLIC Report CC11
- Lihong X., 1996, Bond strength of composite interface of concrete filled steel tubular column (top), Building Science, 12, 22
- Lihong X., 1996, Bond strength of composite interface of concrete-filled steel tube column: (under), Building Science, 12, 19
- Yongjian L., 2006, Push-out test on shear bond strength of CFST, Industrial Construction, 36, 78
- Jianbin W., 2007, Experimental study on bond-slip behavior between steel and concrete in square concrete filled steel structures, Building Structure, 37, 74
- Yong-jian L., 2007, Bond-slip mechanics behaviors of structures concrete filled steel tubes, Journal of Chang’an University, 27, 53
- National Standards of the People’s Republic of China, 2011, Preparation of Steel Substrates before Application of Paints and Related Products-Visual Assessment of Surface Cleanliness-Part 1: Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates after Overall Removal of Previous Coatings, GB/T 8923.1-2011
- National Standards of the People’s Republic of China, 2010, Metallic Materials-Tensile Testing-Part 1: Method of Test at Room Temperature, GB/T 228.1-2010
- Profession Standard of the People’s Republic of China, 2011, Specification for Mix Proportion Design of Ordinary Concrete, JGJ 55-2011
- National Standards of the People’s Republic of China, 2003, Standard for Test Method of Mechanical Properties on Ordinary Concrete, GB/T 50081-2002
- Shaohuai C., 2007, Modern Steel Tube Confined Concrete Structures, 230
Cited by
Dong, H., Chen, X., Cao, W., & Zhao, Y. (2020) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2020.105951 · Cited by 59
Experimental study on the interfacial bond behavior of UHPC filled circular stainless steel tubes
Lai, B., Li, Y., Zhao, J., Kong, Z., & Fan, S. (2024) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2024.109172 · Cited by 26
Study of bond-slip push-out test of circular hollow steel tube and UHTCC
Wang, B., Wang, J., Ren, Q., Long, Y.-Y., Sun, Z.-L., & Zhao, X. (2024) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2024.109043 · Cited by 23
Deng, N., Zhao, H., Yao, D., & Tang, Z. (2023) · Materials · doi:10.3390/ma16103836 · Cited by 14
Evaluation of the Bond Stress Transfer Mechanism in CFSTs
Somma, G., & Vit, M. (2022) · International Journal of Civil Engineering · doi:10.1007/s40999-022-00769-2 · Cited by 14
“[8] and [14], the stress–slip curve can take on three different shapes: it may display a maximum branch followed by a falling one, a maximum branch followed by a falling one rising again at a high slip, or no maximum branch at all.”
Background
Metadata
- Authors
- Wang, L., Chen, H., Zhong, J., Chen, H., Xuan, W., Mi, S., & Yang, H.
- Affiliations
- Shandong University of Science and Technology (CN)
- Corresponding author
- Chen, Haitao
- Venue
- Advances in Materials Science and Engineering
- Publisher
- Wiley
- Published
- 2018-01
- Volume
- 2018
- Issue
- 1
- ISSN
- 1687-8434 (ISSN-L)
- 1687-8442
- OpenAlex
- W2790169821
- Cited by
- 13
- References
- 13
- Citations by year
- 2025: 2 · 2024: 4 · 2023: 2 · 2022: 3 · 2021: 1 · 2020: 1
- FWCI
- 0.45
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advances in Materials Science and Engineering (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Shandong University of Science and Technology (YC150215)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Materials Analysis
- Keywords
- bond-slip behavior, push-out test, bond stress distribution, relative slip, slenderness ratio, width-to-thickness ratio, steel-concrete interface
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.