Preparation and Thermal Properties of Eutectic Hydrate Salt Phase Change Thermal Energy Storage Material
Open accessThe DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
In this study, a new cold storage phase change material eutectic hydrate salt (K 2 HPO 4·3H 2 O–NaH 2 PO 4·2H 2 O–Na 2 S 2 O 3·5H 2 O) was prepared, modified, and tested. The modification was performed by adding a nucleating agent and thickener. The physical properties such as viscosity, surface tension, cold storage characteristics, supercooling, and the stability during freeze-thaw cycles were studied. Results show that the use of nucleating agents, such as sodium tetraborate, sodium fluoride, and nanoparticles, are effective. The solidification temperature and latent heat of these materials which was added with 0, 3, and 5 wt% thickeners were −11.9, −10.6, and −14.8°C and 127.2, 118.6, 82.56 J/g, respectively. Adding a nucleating agent can effectively improve the nucleation rate and nucleation stability. Furthermore, increasing viscosity has a positive impact on the solidification rate, supercooling, and the stability during freeze-thaw cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“With increasing viscosity, the effects of the NPs lessened, as did the absorption peak and phase change enthalpy, due to the decrease in micro-convection.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [54]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Three samples with different amounts of thickeners were tested, showing an increase in onset and end temperatures from 0 to 3 wt %, but a decrease at 5 wt %.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [54]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“The increase in viscosity also suppressed supercooling, decreased surface tension, and decreased the solidification time.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [54]
The cited source says what the claim attributes to it.
In the citing paper
“Nucleating agents were proven to reduce or eliminate the degree of supercooling.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [54]
The cited source says what the claim attributes to it.
In the citing paper
“Stability testing showed that after 20, 30, and 50 cycles, the supercooling reduced [54].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [54]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
A review on supercooling of Phase Change Materials in thermal energy storage systems
Safari, A., Saidur, R., Sulaiman, F. A., Xu, Y., & Dong, J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.272 · Cited by 594
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
A review on phase change cold storage in air-conditioning system: Materials and applications
Zhai, X. Q., Wang, X. L., Wang, T., & Wang, R. Z. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.02.013 · Cited by 206
Li, M., Kao, H., Wu, Z., & Tan, J. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.11.001 · Cited by 202
Yang, R., Xu, H., & Zhang, Y. (2003) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2003.08.005 · Cited by 202
Cao, F., & Yang, B. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.08.048 · Cited by 181
Supercooling elimination of phase change materials (PCMs) microcapsules
Al-Shannaq, R., Kurdi, J., Al-Muhtaseb, S., Dickinson, M., & Farid, M. (2015) · Energy · doi:10.1016/j.energy.2015.05.033 · Cited by 173
Liu, Y., & Yang, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.146 · Cited by 158
Li, G., Zhang, B., Li, X., Zhou, Y., Sun, Q., & Yun, Q. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.03.031 · Cited by 157
Development of microencapsulated phase change material for solar thermal energy storage
Su, W., Darkwa, J., & Kokogiannakis, G. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.009 · Cited by 134
Study of magnesium chloride hexahydrate as heat storage material
Pilař, R., Svoboda, L., Honcová, P., & Oravová, L. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.021 · Cited by 108
Long term thermal stability of organic PCMs
Behzadi, S., & Farid, M. M. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.032 · Cited by 99
Li, X., Zhou, Y., Nian, H., Zhu, F., Ren, X., Dong, O., Hai, C., Shen, Y., & Zeng, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.029 · Cited by 97
Sharma, R. K., Ganesan, P., Tyagi, V. V., & Mahlia, T. M. I. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.023 · Cited by 70
Chandrasekaran, P., Cheralathan, M., Kumaresan, V., & Velraj, R. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2013.12.017 · Cited by 69
Huang, Z., Luo, Z., Gao, X., Fang, X., Fang, Y., & Zhang, Z. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.12.010 · Cited by 67
Development of salt hydrate eutectics as latent heat storage for air conditioning and cooling
Efimova, A. A., Pinnau, S., Mischke, M., Breitkopf, C., Ruck, M., & Schmidt, P. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.11.011 · Cited by 65
Thermal Energy Storage Behavior of CaCl2.6H2O during Melting and Solidification
B[idot]len, K., Takgil, F., & Kaygusuz, K. (2008) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567030601082175 · Cited by 62
Wang, T., Mantha, D., & Reddy, R. G. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.04.033 · Cited by 60
Androsch, R., Monami, A., & Kučera, J. (2014) · Journal of Crystal Growth · doi:10.1016/j.jcrysgro.2014.09.028 · Cited by 57
Nucleation rate and supercooling degree of water-based graphene oxide nanofluids
Yudong, L., Jiangqing, W., Chuangjian, S., Shichao, G., Yongkun, G., & Quangui, P. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.051 · Cited by 56
Influence of anisotropy on heterogeneous nucleation
Mariaux, A., & Rappaz, M. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.10.015 · Cited by 17
Assessment of Novel Inorganic Storage Medium with Low Melting Point
Pfleger, N. A., Braun, M., Eck, M., & Bauer, T. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.186 · Cited by 11
Research works printed but not linked: 1
- 2011, Indian Journal of Pure & Applied Physics, 49, 117
Cited by
Yang, L., Villalobos, U., Akhmetov, B., Gil, A., Khor, J. O., Palacios, A., Li, Y., Ding, Y., Cabeza, L. F., Tan, W. L., et al. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116555 · Cited by 207
Salt hydrate phase change materials: Current state of art and the road ahead
Dixit, P., Reddy, V. J., Parvate, S., Balwani, A., Singh, J., Maiti, T. K., Dasari, A., & Chattopadhyay, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104360 · Cited by 179
Progress on use of nanoparticles in salt hydrates as phase change materials
Wong-Pinto, L.-S., Milian, Y., & Ushak, S. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109727 · Cited by 165
Inorganic salt hydrate for thermal energy storage application: A review
Purohit, B. K., & Sistla, V. S. (2020) · Energy Storage · doi:10.1002/est2.212 · Cited by 151
Nano additive enhanced salt hydrate phase change materials for thermal energy storage
Kalidasan, B., Pandey, A. K., Saidur, R., Samykano, M., & Tyagi, V. V. (2022) · International Materials Reviews · doi:10.1080/09506608.2022.2053774 · Cited by 126
Metadata
- Authors
- Liang, L., & Chen, X.
- Affiliations
- China University of Mining and Technology (CN)
- Corresponding author
- Liang, Lin
- ORCID
- Venue
- International Journal of Photoenergy
- Publisher
- Wiley
- Published
- 2018
- Volume
- 2018
- Pages
- 1-9
- ISSN
- 1110-662X (ISSN-L)
- 1687-529X
- OpenAlex
- W2793677217
- Cited by
- 42
- References
- 25
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 9 · 2023: 3 · 2022: 7 · 2021: 8 · 2020: 3 · 2019: 1 · 2018: 1
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- International Journal of Photoenergy (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Fundamental Research Funds for the Central Universities (2014QNB05)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Chemical Engineering › Filtration and Separation › Freezing and Crystallization Processes
- Keywords
- phase change materials, cold storage, thermal energy storage, nucleating agents, thickening agents, borax, sodium fluoride, nanoparticles, supercooling, freeze-thaw stability, latent heat, solidification temperature, viscosity, surface tension, solidification rate
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.