Effects of Biceramic AlN-SiC Microparticles on the Thermal Properties of Paraffin for Thermal Energy Storage
Open accessThe DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Herein, simplified time-efficient production of AlN-coated SiC (SiC@AlN) ceramic powder was practiced. Short-term vibratory ball milling with high frequency was employed to integrate the microsize particles. Also, paraffin as a significant phase change material (PCM) was reinforced using the manufactured SiC@AlN in order to enhance the thermal conductivity (TC) and stability of the final composite. Various characterization methods were used to clarify the changes in particle size of the biceramic powder as well as the thermal features of the paraffin-based composite. Manufactured SiC@AlN was found to be the most effective in the improvement of interfacial adhesion of composite components and the subsequent enhancement of TC, compared with singular ceramic powders as the reinforcing agents. Also, differential scanning calorimetry (DSC) indicated a very slight increase in latent heat of the fabricated composite PCM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Thermal conductivity and specific heat testing by the transient plane source method showed that the SiC@AlN particles achieved higher thermal conductivity and lower specific heat than the other cases (plain paraffin, paraffin with AlN, paraffin with SiC).”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [51]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“An insignificant growth in latent heat was also observed, and the SiC@AlN particles were less expensive than AlN alone [51].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [51]
The cited source says what the claim attributes to it.
In the citing paper
“X-ray spectrometry showed that this was caused by the formation of conductive networks by the SiC@AlN particles.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [51]
The cited source says what the claim attributes to it.
In the citing paper
“The effects of milling frequencies and the ball-to-powder mass ratio on the particle size distribution were tested: as the frequency increased, the particle diameter decreased.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [51]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
CRC Materials Science and Engineering Handbook
(2000) · CRC Press eBooks · doi:10.1201/9781420038408 · Cited by 616
Cui, Y., Liu, C., Hu, S., & Yu, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.021 · Cited by 423
Materials for thermal conduction
Chung, D. D. L. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(01)00042-4 · Cited by 419
Xia, L., Zhang, P., & Wang, R. Z. (2010) · Carbon · doi:10.1016/j.carbon.2010.03.030 · Cited by 397
Ho, C. J., & Gao, J. Y. (2009) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2009.01.015 · Cited by 393
Thermal conductivity enhancement in a latent heat storage system
Mettawee, E.-B. S., & Assassa, G. M. R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.11.009 · Cited by 378
Dhaidan, N. S., Khodadadi, J. M., Al-Hattab, T. A., & Al-Mashat, S. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.06.057 · Cited by 221
Park, S.-J., & Kim, B.-J. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.08.129 · Cited by 197
Self-citationCharacteristics of phase-change materials containing oxide nano-additives for thermal storage
Teng, T.-P., & Yu, C.-C. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-611 · Cited by 195
An investigation of melting/freezing characteristics of nanoparticle-enhanced phase change materials
Wu, S. Y., Wang, H., Xiao, S., & Zhu, D. S. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-2080-x · Cited by 171
Chintakrinda, K., Weinstein, R. D., & Fleischer, A. S. (2011) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2011.04.005 · Cited by 135
Numerical study of the melting of nano-enhanced phase change material in a square cavity
Sebti, S. S., Mastiani, M., Mirzaei, H., Dadvand, A., Kashani, S., & Hosseini, S. A. (2013) · Journal of Zhejiang University SCIENCE A · doi:10.1631/jzus.a1200208 · Cited by 112
Numerical analysis of a medium scale latent energy storage unit for district heating systems
Colella, F., Sciacovelli, A., & Verda, V. (2012) · Energy · doi:10.1016/j.energy.2012.03.043 · Cited by 99
Park, S., Kim, B.-J., Seo, D., Rhee, K. Y., & Lyu, Y. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.07.023 · Cited by 98
Self-citationTHERMAL PERFORMANCE ENHANCEMENT OF PARAFFIN WAX WITH AL2O3 AND CuO NANOPARTICLES – A NUMERICAL STUDY
Arasu, A. V., Sasmito, A. P., & Mujumdar, A. S. (2012) · Frontiers in Heat and Mass Transfer · doi:10.5098/hmt.v2.4.3005 · Cited by 68
Kim, D.-K., An, K.-H., Bang, Y. H., Kwac, L.-K., Oh, S.-Y., & Kim, B.-J. (2016) · Carbon letters · doi:10.5714/cl.2016.19.032 · Cited by 38
Self-citationOn Modulating Interfacial Structure towards Improved Anti-Icing Performance
Jha, K. C., Anim-Danso, E., Bekele, S., Eason, G., & Tsige, M. (2016) · Coatings · doi:10.3390/coatings6010003 · Cited by 37
Sproesser, O., Schmidlin, P. R., Uhrenbacher, J., Eichberger, M., Roos, M., & Stawarczyk, B. (2014) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2014.06.006 · Cited by 36
Choi, W.-K., Kim, H.-I., Kang, S., Lee, Y. S., Han, J. H., & Kim, B.-J. (2016) · Carbon letters · doi:10.5714/cl.2016.17.1.079 · Cited by 32
Self-citationPCM/ graphite foam composite for thermal energy storage device
Guo, C. X., L, X., & Yang, L. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/87/1/012014 · Cited by 27
The effect of particle size distribution on the formation of percolation clusters
Dovzhenko, A. Y., & Zhirkov, P. V. (1995) · Physics Letters A · doi:10.1016/0375-9601(95)00465-f · Cited by 15
Badakhsh, A., & Park, C. W. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45397 · Cited by 12
Self-citationFiber surface and electrical conductivity of electroless Ni-plated PET ultra-fine fibers
Choi, W.-K., Kim, B.-J., & Park, S. (2013) · Carbon letters · doi:10.5714/cl.2013.14.4.243 · Cited by 6
Self-citationStudy of complex electrodeposited thin film with multi-layer graphene-coated metal nanoparticles
Cho, Y.-L., Lee, J.-W., Park, C., Song, Y.-I., & Suh, S. (2017) · Carbon letters · doi:10.5714/cl.2017.21.068 · Cited by 2
Self-citation
Research works printed but not linked: 2
- 12. A. Badakhsh, C. W. Park, and B.-J. Kim, "Preparation and analysis of paraffin-based phase change material using alumi- num nitride as the reinforcing agent," in 4th International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications, pp. 70-72, One Central Press, Uni- versity of Aalto, Finland, 2017.
- 23. Y. S. Touloukian, Thermophysical Properties of High Tempera- ture Solid Materials, vol. 5, Part 1, 1967, MacMillan Co., New York, United States, 1967.
Cited by
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“[51], who experimented with the melting and solidification of paraffin with aluminum nitride coated SiC (SiC@AlN) particles.”
BackgroundInfluentialBadakhsh, A., Lee, Y., Rhee, K. Y., Park, C. W., An, K.-H., & Kim, B.-J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107075 · Cited by 89
Self-citationA review of phase change materials and heat enhancement methodologies
Saqib, M., & Andrzejczyk, R. (2022) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.467 · Cited by 54
Thermal management system of batteries using AlN reinforced TPMS-PCM composite material
Yetik, Ö., Engün, S., Kok, B., & Karakoç, T. H. (2024) · Energy · doi:10.1016/j.energy.2024.134137 · Cited by 38
Adera, B., Ancha, V. R., Tadiwose, T., & Getahun, E. (2025) · International Journal of Thermofluids · doi:10.1016/j.ijft.2025.101418 · Cited by 37
Metadata
- Authors
- Badakhsh, A., An, K.-H., Park, C. W., & Kim, B.-J.
- Affiliations
- Jeonbuk National University (KR)
- Jeonju University (KR)
- Research Laboratory for Multifunctional Carbon Materials, Korea Institute of Carbon Convergence Technology (KCTECH), Jeonju, Jeonbuk 54853, Republic of Korea
- Corresponding author
- An, Kay-Hyeok
- Park, Chan Woo
- Kim, Byung-Joo
- Venue
- Journal of Nanomaterials
- Publisher
- Wiley
- Published
- 2018-09-06
- Volume
- 2018
- Pages
- 1-10
- ISSN
- 1687-4110 (ISSN-L)
- 1687-4129
- OpenAlex
- W2891234679
- Cited by
- 13
- References
- 25
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 1 · 2023: 1 · 2022: 3 · 2021: 2 · 2020: 1 · 2019: 2
- FWCI
- 0.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of Nanomaterials (publishedVersion, cc-by)
- Strathprints: The University of Strathclyde institutional repository (University of Strathclyde) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Ministry of Trade, Industry and Energy (20152020001240, 2015M3A7B4049716, 2015R1A2A2A01005693)
- Ministry of Science, ICT and Future Planning (20152020001240, 2015M3A7B4049716, 2015R1A2A2A01005693)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- alkanes, phase change materials, thermal energy storage, thermal conductivity enhancement, vibratory ball milling, latent heat, composite stability, interfacial adhesion, particle size
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.