Repeated Utilization of Ionic Liquid to Extract Lipid from Algal Biomass
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In this work, different kinds of ionic liquids and reaction conditions for the extraction of lipid from microalgae biomass were optimized and repeated use of ionic liquids for microalgal lipid extraction was evaluated. Morphological changes of microalgae cells were compared in terms of pre- and post-treatment to understand the mechanisms of ionic liquid treatment. Ionic liquid [BMIM][MeSO 4] showed the best lipid extraction efficiency at 70°C and with reaction time of 2 hours. The ratios (ILs : methanol) of 1 : 7 and 1 : 3 were the optimum ratios to complete the extraction of the lipids from microalgae. The initial 50% volume fraction of [BMIM][MeSO 4] was 16.04% of dry weight, which showed the highest five average extraction rates. The loss of ionic liquid in the reaction system and the increase in water content of ionic liquids were considered as the main reasons for the decrease in the extraction rate. It is suggested that the potential of lipid extraction in this IL-methanol co-solvent system is promising due to the high efficiency, low cost, safety, environmental protection, and other characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Methods of downstream processing for the production of biodiesel from microalgae
Kim, J., Yoo, G., Lee, H., Lim, J., Kim, K., Kim, C. W., Park, M. S., & Yang, J.-W. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.006 · Cited by 519
FT-IR Microspectroscopy Enhances Biological and Ecological Analysis of Algae
Murdock, J. N., & Wetzel, D. L. (2009) · Applied Spectroscopy Reviews · doi:10.1080/05704920902907440 · Cited by 223 · cited 1×
“, carbohydrate, show a peak near 1100–900 cm, lipids show peak near 2970-2850 cm, and proteins show peak near 1750–1500 cm [25, 26].”
Background
Cited by
Tan, J. S., Lee, S. Y., Chew, K. W., Lam, M. K., Lim, J. W., Ho, S.-H., & Show, P. L. (2020) · Bioengineered · doi:10.1080/21655979.2020.1711626 · Cited by 524
RetractedRecent advances in downstream processing of microalgae lipid recovery for biofuel production
Khoo, K. S., Chew, K. W., Yew, G. Y., Leong, W. H., Chai, Y. H., Show, P. L., & Chen, W.-H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.122996 · Cited by 315
Energy Applications of Ionic Liquids: Recent Developments and Future Prospects
Zhou, T., Gui, C., Sun, L., Hu, Y., Lyu, H., Wang, Z., Song, Z., & Yu, G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00391 · Cited by 305
Self-citationAlgae as green energy reserve: Technological outlook on biofuel production
Anto, S., Mukherjee, S. S., Muthappa, R., Mathimani, T., Deviram, G., Kumar, S. S., Verma, T. N., & Pugazhendhi, A. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2019.125079 · Cited by 277
Vasistha, S., Khanra, A., Clifford, M., & Rai, M. P. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110498 · Cited by 208
Metadata
- Authors
- Zhou, W., Wang, Z., Alam, M. A., Xu, J., Zhu, S., Yuan, Z., Huo, S., Guo, Y., Qin, L., & Ma, L.
- Venue
- International Journal of Polymer Science
- Publisher
- Wiley
- Published
- 2019-01-09
- Volume
- 2019
- Pages
- 1-7
- ISSN
- 1687-9422 (ISSN-L)
- 1687-9430
- OpenAlex
- W2909773526
- Cited by
- 60
- References
- 2
- FWCI
- 1.55
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.