Greenhouse Gas Profile of a Plastic Material Derived from a Genetically Modified Plant
The DOI matches its Crossref record.
Abstract
This article reports an assessment of the global warming potential associated with the life cycle of a biopolymer (poly(hydroxyalkanoate) or PHA) produced in genetically engineered corn developed by Monsanto. The grain corn is harvested in a conventional manner, and the polymer is extracted from the corn stover (i.e., residues such as stalks, leaves and cobs), which would be otherwise left on the field. While corn farming was assessed based on current practice, four different hypothetical PHA production scenarios were tested for the extraction process. Each scenario differed in the energy source used for polymer extraction and compounding, and the results were compared to polyethylene (PE). The first scenario involved burning of the residual biomass (primarily cellulose) remaining after the polymer was extracted from the stover. In the three other scenarios, the use of conventional energy sources of coal, oil, and natural gas were investigated. This study indicates that an integrated system, wherein biomass energy from corn stover provides energy for polymer processing, would result in a better greenhouse gas profile for PHA than for PE. However, plant‐based PHA production using fossil fuel sources provides no greenhouse gas advantage over PE, in fact scoring worse than PE. These results are based on a “cradle‐to‐pellet” modeling as the PHA end‐of‐life was not quantitatively studied due to complex issues surrounding the actual fate of postconsumer PHA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Biodegradation of Agricultural Plastic Films: A Critical Review
Kyrikou, I., & Briassoulis, D. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0053-8 · Cited by 627
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Bio-based plastics - A review of environmental, social and economic impact assessments
Spierling, S., Knüpffer, E., Behnsen, H., Mudersbach, M., Krieg, H., Springer, S., Albrecht, S., Herrmann, C., & Endres, H.-J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.014 · Cited by 502
Life cycle assessment of bio-based and fossil-based plastic: A review
Walker, S., & Rothman, R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121158 · Cited by 480
HARDING, K., DENNIS, J., VONBLOTTNITZ, H., & HARRISON, S. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.02.012 · Cited by 461
Metadata
- Authors
- Kurdikar, D., Fournet, L., Slater, S. C., Paster, M., Gruys, K. J., Gerngross, T. U., & Coulon, R.
- Venue
- Journal of Industrial Ecology
- Published
- 2000-07
- Volume
- 4
- Issue
- 3
- Pages
- 107-122
- ISSN
- 1088-1980 (ISSN-L)
- 1530-9290
- OpenAlex
- W2094166890
- Cited by
- 108
- References
- 0
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Greenhouse Gas Profile of a Plastic Material Derived from a Genetically Modified Plant. https://app.cochat.ai/papers/10.1162/108819800300106410
- The paper
- Kurdikar, D., Fournet, L., Slater, S. C., Paster, M., Gruys, K. J., Gerngross, T. U., & Coulon, R. (2000). Greenhouse Gas Profile of a Plastic Material Derived from a Genetically Modified Plant. Journal of Industrial Ecology. https://doi.org/10.1162/108819800300106410
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.