The DOI matches its Crossref record.
Cement Manufacture and the Environment: Part I: Chemistry and Technology
Abstract
Summary: Hydraulic (chiefly portland) cement is the binding agent in concrete and mortar and thus a key component of a country's construction sector. Concrete is arguably the most abundant of all manufactured solid materials. Portland cement is made primarily from finely ground clinker, which itself is composed dominantly of hydraulically active calcium silicate minerals formed through high‐temperature burning of limestone and other materials in a kiln. This process requires approximately 1.7 tons of raw materials per ton of clinker produced and yields about 1 ton of carbon dioxide (CO2) emissions, of which cal‐cination of limestone and the combustion of fuels each con‐tribute about half. The overall level of CO2 output makes the cement industry one of the top two manufacturing industry sources of greenhouse gases; however, in many countries, the cement industry's contribution is a small fraction of that from fossil fuel combustion by power plants and motor vehicles. The nature of clinker and the enormous heat requirements of its manufacture allow the cement industry to consume a wide variety of waste raw materials and fuels, thus providing the opportunity to apply key concepts of industrial ecology, most notably the closing of loops through the use of by‐products of other industries (industrial symbiosis). In this article, the chemistry and technology of cement manufacture are summarized. In a forthcoming companion ar‐ticle (part II), some of the environmental challenges and op‐portunities facing the cement industry are described. Because of the size and scope of the U.S. cement industry, the analysis relies primarily on data and practices from the United States.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of mineral carbonation technology in sequestration of CO2
Olajire, A. A. (2013) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2013.03.013 · Cited by 567
Redefining Industrial Symbiosis: Crossing Academic–Practitioner Boundaries
Lombardi, D. R., & Laybourn, P. (2012) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00444.x · Cited by 466
Cement Manufacture and the Environment. Part II: Environmental Challenges and Opportunities
van Oss, H. G., & Padovani, A. C. (2003) · Journal of Industrial Ecology · doi:10.1162/108819803766729212 · Cited by 413
Self-citationComparative life cycle assessment of reactive MgO and Portland cement production
Ruan, S., & Unluer, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.071 · Cited by 383
CONSTRUCTION MATERIALS AND THE ENVIRONMENT
Horvath, A. (2004) · Annual Review of Environment and Resources · doi:10.1146/annurev.energy.29.062403.102215 · Cited by 340
Metadata
- Authors
- van Oss, H. G., & Padovani, A. C.
- Venue
- Journal of Industrial Ecology
- Published
- 2002-01
- Volume
- 6
- Issue
- 1
- Pages
- 89-105
- ISSN
- 1088-1980 (ISSN-L)
- 1530-9290
- OpenAlex
- W2130500941
- Cited by
- 237
- References
- 0
- FWCI
- 30.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cement Manufacture and the Environment: Part I: Chemistry and Technology. https://app.cochat.ai/papers/10.1162/108819802320971650
- The paper
- van Oss, H. G., & Padovani, A. C. (2002). Cement Manufacture and the Environment: Part I: Chemistry and Technology. Journal of Industrial Ecology. https://doi.org/10.1162/108819802320971650
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.