The DOI matches its Crossref record.
Three-dimensional degradable porous polymer-ceramic matrices for use in bone repair
Abstract
A degradable polymer-ceramic matrix for use as a bone graft material is described. The fabrication method used produces 3-dimensional macroporous matrices which are structurally similar to cancellous bone in their porosity, mechanically similar to cancellous bone in compressive elastic modulus and chemically comparable to the mineral matrix of bone in that they contain hydroxyapatite (HA). A 50:50 copolymer of poly(lactide/glycolide) (PLAGA) reinforced by a particulate calcium phosphate ceramic, HA, was used to create a matrix composed of polymeric microspheres. The channels between these spheres were pores approximately 100 microns in diameter. Four polymer/ceramic ratios were used in matrix fabrication: 1:0, 1:1, 2.5:1, and 5:1. The mechanical behavior of the material was found to vary with ceramic content. Increased levels of HA resulted in increased compressive elastic moduli. Prior to polymer degradation, moduli ranged from a high of 1459 MPa (50% HA) to a low of 293 MPa (0% HA). Degradation studies over a 6-week period showed that 0 and 16.7% HA-containing matrices lost up to 50% of their original weight, while the 28.6 and 50% IIA-containing matrices lost up to 20% of their original weight. Increased HA matrix content translated into decreased rates of matrix degradation. Environmental scanning electron microscopy (ESEM) confirmed that the polymer matrix contained pores that were interconnected during degradation. Viewed via ESEM, 10% HA containing matrices completely degraded by 6 weeks, while 50% HA matrices remained relatively stable. These studies indicate that the porous 3-dimensional polymer/ceramic matrix may potentially be useful as a synthetic material for bone repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Self-citationPolymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
Tissue Engineering: Orthopedic Applications
Laurencin, C. T., Ambrosio, A. M. A., Borden, M. D., & Cooper, J. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.19 · Cited by 752
Self-citationTaboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Biomaterials for Bone Regenerative Engineering
Yu, X., Tang, X., Gohil, S. V., & Laurencin, C. T. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400760 · Cited by 418
Self-citation
Metadata
- Authors
- Devin, J. E., Attawia, M. A., & Laurencin, C. T.
- Venue
- Journal of Biomaterials Science, Polymer Edition
- Publisher
- Informa UK Limited
- Published
- 1996-01
- Volume
- 7
- Issue
- 8
- Pages
- 661-669
- ISSN
- 0920-5063 (ISSN-L)
- 1568-5624
- OpenAlex
- W1973705788
- Cited by
- 174
- References
- 0
- FWCI
- 5.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Three-dimensional degradable porous polymer-ceramic matrices for use in bone repair. https://app.cochat.ai/papers/10.1163/156856296x00435
- The paper
- Devin, J. E., Attawia, M. A., & Laurencin, C. T. (1996). Three-dimensional degradable porous polymer-ceramic matrices for use in bone repair. Journal of Biomaterials Science, Polymer Edition. https://doi.org/10.1163/156856296x00435
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.