Effect of the Drying Conditions on the Microstructure of Silica Based Xerogels and Aerogels
The DOI matches its Crossref record.
Abstract
Nanostructured silica based xerogels and aerogels are prepared by sol-gel technology, using methyltrimethoxysilane as precursor. The influence of the drying method and conditions on the microstructure of the obtained materials is investigated, since the drying stage has a critical influence on their porosity. Two types of drying methods were used: atmospheric pressure drying (evaporative), to produce xerogels, and supercritical fluids drying, to obtain aerogels. Although the supercritical fluids drying technique is more expensive and hazardous than the atmospheric pressure drying, it is well known that aerogels are less dense than the xerogels due to less pore shrinkage. However, the ideal situation would be to use atmospheric pressure drying in conditions that minimize the pore collapse. Therefore, in this work, different temperature cycles for atmospheric pressure drying and two heating rates for the supercritical fluids drying are tested to study the gels' shrinkage by analyzing the density and porosity properties of the final materials. The best materials obtained are aerogels dried with the lower heating rate (approximately 80 degrees C/h), since they exhibit very low bulk density (approximately 50 kg/m3), high porosity (95%)-mainly micro and mesopores, high surface area (approximately 500 m2/g), moderate flexibility and a remarkable hydrophobic character (>140 degrees). It was proved that the temperature cycles of atmospheric pressure drying can be tuned to obtain xerogels with properties comparable to those of aerogels, having a bulk density only approximately15 kg/m3 higher. All the synthesized materials fulfill the requirements for application as insulators in Space environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740
“[79,80,99] also studied the effect of the Smolar ratio and drying parameters on resulted properties of silica aerogels/xerogels with the samples containing 100% MTMS, 100% ETMS and for the aerogels/xerogels with 25% ETMS and 75% MTMS.”
BackgroundSelf-citationLinhares, T., Pessoa de Amorim, M. T., & Durães, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04811a · Cited by 366
Self-citationAn overview on alumina-silica-based aerogels
Almeida, C. M. R., Ghica, M. E., & Durães, L. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102189 · Cited by 132
Self-citationKaramikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
Silica Centered Aerogels as Advanced Functional Material and Their Applications: A Review
Ahmad, S., Ahmad, S., & Sheikh, J. N. (2023) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2023.122322 · Cited by 97
Metadata
- Authors
- Durães, L., Ochoa, M., Rocha, N., Patrício, R., Duarte, N., Redondo, V., & Portugal, A.
- Venue
- Journal of Nanoscience and Nanotechnology
- Publisher
- American Scientific Publishers
- Published
- 2012-08-01
- Volume
- 12
- Issue
- 8
- Pages
- 6828-6834
- ISSN
- 1533-4880 (ISSN-L)
- OpenAlex
- W2325484291
- Cited by
- 73
- References
- 0
- FWCI
- 1.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of the Drying Conditions on the Microstructure of Silica Based Xerogels and Aerogels. https://app.cochat.ai/papers/10.1166/jnn.2012.4560
- The paper
- Durães, L., Ochoa, M., Rocha, N., Patrício, R., Duarte, N., Redondo, V., & Portugal, A. (2012). Effect of the Drying Conditions on the Microstructure of Silica Based Xerogels and Aerogels. Journal of Nanoscience and Nanotechnology. https://doi.org/10.1166/jnn.2012.4560
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.