The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
An investigation into reinforced and functionally graded lattice structures
Open accessAbstract
Lattice structures are regarded as excellent candidates for use in lightweight energy-absorbing applications, such as crash protection. In this paper we investigate the crushing behaviour, mechanical properties and energy absorption of lattices made by an additive manufacturing process. Two types of lattice were examined: body-centred-cubic (BCC) and a reinforced variant called BCC z. The lattices were subject to compressive loads in two orthogonal directions, allowing an assessment of their mechanical anisotropy to be made. We also examined functionally graded versions of these lattices, which featured a density gradient along one direction. The graded structures exhibited distinct crushing behaviour, with a sequential collapse of cellular layers preceding full densification. For the BCC z lattice, the graded structures were able to absorb around 114% more energy per unit volume than their non-graded counterparts before full densification, 1371 ± 9 kJ/m 3 versus 640 ± 10 kJ/m 3. This highlights the strong potential for functionally graded lattices to be used in energy-absorbing applications. Finally, we determined several of the Gibson–Ashby coefficients relating the mechanical properties of lattice structures to their density; these are crucial in establishing the constitutive models required for effective lattice design. These results improve the current understanding of additively manufactured lattices and will enable the design of sophisticated, functional, lightweight components in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Heat transfer in open-cell metal foams
Lu, T. J., Stone, H. A., & Ashby, M. F. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00031-7 · Cited by 603
Drop weight impact behaviour of sandwich panels with metallic micro lattice cores
Mines, R. A. W., Tsopanos, S., Shen, Y., Hasan, R., & McKown, S. T. (2013) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2013.04.007 · Cited by 253
The design of impact absorbing structures for additive manufacture
Brennan-Craddock, J. P. J., Brackett, D., Wildman, R. D., & Hague, R. (2012) · Journal of Physics Conference Series · doi:10.1088/1742-6596/382/1/012042 · Cited by 135
Self-citation
Cited by
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Self-citationSLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Self-citationMaskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Self-citationCompressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Self-citation
Metadata
- Authors
- Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R.
- Venue
- Journal of Cellular Plastics
- Publisher
- SAGE Publications
- Published
- 2016-07-28
- Volume
- 53
- Issue
- 2
- Pages
- 151-165
- ISSN
- 0021-955X (ISSN-L)
- 1530-7999
- OpenAlex
- W2303129808
- Cited by
- 339
- References
- 14
- FWCI
- 17.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An investigation into reinforced and functionally graded lattice structures. https://app.cochat.ai/papers/10.1177/0021955x16639035
- The paper
- Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017). An investigation into reinforced and functionally graded lattice structures. Journal of Cellular Plastics. https://doi.org/10.1177/0021955x16639035
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.