The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review
Abstract
‘The micro/nano reinforced particle’ aluminum metal matrix composites (Al-MMCs) are widely used in manufacturing sector due to light-weight, superior strength-to-weight ratio, better fracture toughness, improved fatigue, and tensile property, enhanced corrosion resistance to harsh environment, etc. This article provides an overview of the manufacturing processes and different reinforcing elements used during the synthesis of Al-MMCs. Generally, the reinforced particles like carbides, nitrides, and compounds of oxides are used. Different organic, inorganic, industrial and agricultural waste which can be used for reinforcement in the aluminum matrix is highlighted with their feasible applications. The common mechanical properties (i.e. hardness, tensile and compressive strength, etc.) reported by different researchers are thoroughly discussed with the aim to highlight the amount of reinforcement and improvement occurred during processing. The formation and methodology for mixing condition and sintering behaviour of Al-MMCs are discussed to impart knowledge about the processing circumstances in powder metallurgical route. The affecting conditions during operating and responsible factor for the tribological behaviour are deliberated in a precise manner to recognize the potentiality of reinforcing particles in Al-MMCs. Finally, the different shortcomings and future prospects of the Al-MMCs are given to encourage the future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease
Cappello, V., Marchetti, L., Parlanti, P., Landi, S., Tonazzini, I., Cecchini, M., Piazza, V., & Gemmi, M. (2016) · Scientific Reports · doi:10.1038/s41598-016-0001-8 · Cited by 13,097
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
Williams, J. C., & Starke, E. A. (2003) · Acta Materialia · doi:10.1016/j.actamat.2003.08.023 · Cited by 2,342
Particle reinforced aluminium and magnesium matrix composites
Lloyd, D. J. (1994) · International Materials Reviews · doi:10.1179/095066094790150982 · Cited by 2,227
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Carbon nanotube reinforced metal matrix composites - a review
Bakshi, S. R., Lahiri, D., & Agarwal, A. (2010) · International Materials Reviews · doi:10.1179/095066009x12572530170543 · Cited by 1,446
Guillon, O., Gonzalez‐Julian, J., Dargatz, B., Kessel, T., Schierning, G., Räthel, J., & Herrmann, M. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201300409 · Cited by 1,403
Full sintering of powdered-metal bodies in a microwave field
Roy, R., Agrawal, D., Cheng, J., & Gedevanishvili, S. (1999) · Nature · doi:10.1038/21390 · Cited by 867
Aluminum Metal-Matrix Composites for Automotive Applications: Tribological Considerations
Prasad, S. V., & Asthana, R. (2004) · Tribology Letters · doi:10.1023/b:tril.0000044492.91991.f3 · Cited by 703
Shorowordi, K. M., Laoui, T., Haseeb, A. S. M. A., Célis, J., & Froyen, L. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00815-x · Cited by 688
Metal-matrix composites for space applications
Rawal, S. P. (2001) · JOM · doi:10.1007/s11837-001-0139-z · Cited by 639
Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
Tjong, S. C. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700106 · Cited by 619
Rashad, M., Pan, F., Tang, A., & Asif, M. (2014) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2014.03.012 · Cited by 489
Mortensen, A., & Llorca, J. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104511 · Cited by 477
Aluminum-Based Cast In Situ Composites: A Review
Pramod, S. L., Bakshi, S. R., & Murty, B. S. (2015) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-015-1424-2 · Cited by 209
Mechanical properties of graphene oxide reinforced aluminium matrix composites
Dasari, B. L., Morshed, M. M., Nouri, J. M., Brabazon, D., & Naher, S. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.022 · Cited by 150
Reddy, M. P., Ubaid, F., Shakoor, A., Parande, G., Manakari, V., Mohamed, A. M. A., & Gupta, M. K. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.04.064 · Cited by 131
Ni, X., Yang, X., Guo, W., Yuan, K., Zhou, Y., Ma, Z.-M., & Xu, S. (2016) · Scientific Reports · doi:10.1038/srep26367 · Cited by 121
Processing and characterization of MWCNT reinforced aluminum matrix composites
Idapalapati, S., & Narayanan, K. R. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3290-5 · Cited by 114
Hybrid nanostructured aluminum alloy with super-high strength
Wang, Z., Qu, R. T., Scudino, S., Sun, B. A., Prashanth, K. G., Louzguine, D. V., Chen, M., Zhang, Z. F., & Eckert, J. (2015) · NPG Asia Materials · doi:10.1038/am.2015.129 · Cited by 101
Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB 2 metal matrix composites
Li, M., Ma, K., Jiang, L., Yang, H., Lavernia, E. J., Zhang, L., & Schoenung, J. M. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.01.031 · Cited by 80
Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties
Chen, F., Gupta, N., Behera, R. K., et al. (2018) · JOM · doi:10.1007/s11837-018-2810-7 · Cited by 80
Azarbarmas, M., Emamy, M., Karamouz, M., et al. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.05.036 · Cited by 29
Strengthening of Al-Fe3Al composites by the generation of harmonic structures
Shahid, R. N., & Scudino, S. (2018) · Scientific Reports · doi:10.1038/s41598-018-24824-y · Cited by 21
Multi-scale modeling of thermal conductivity of SiC-reinforced aluminum metal matrix composite
Dong, X., & Shin, Y. C. (2017) · Journal of Composite Materials · doi:10.1177/0021998317695873 · Cited by 17
Cited by
Samal, P., Vundavilli, P. R., Meher, A., & Mahapatra, M. M. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.09.010 · Cited by 644
Metadata
- Authors
- Bhoi, N. K., Singh, H., & Pratap, S.
- Venue
- Journal of Composite Materials
- Publisher
- SAGE Publications
- Published
- 2019-07-29
- Volume
- 54
- Issue
- 6
- Pages
- 813-833
- ISSN
- 0021-9983 (ISSN-L)
- 1530-793X
- OpenAlex
- W2965509648
- Cited by
- 380
- References
- 25
- FWCI
- 18.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.