The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness
Open accessAbstract
Continuum robots exhibit promising adaptability and dexterity for soft manipulation due to their intrinsic compliance. However, this compliance may lead to challenges in modeling as well as positioning and loading. In this paper, a virtual work-based static model is established to describe the deformation and mechanics of continuum robots with a generic rod-driven structure, taking the geometric constraint of the drive rods into account. Following this, this paper presents a novel variable stiffness mechanism powered by a set of embedded Shape Memory Alloy (SMA) springs, which can make the drive rods become ‘locked’ on the body structure with different configurations. The resulting effects of variable stiffness are then presented in the static model by introducing tensions of the SMA and friction on the rods. Compared with conventional models, there is no need to predefine the actuation forces of the drive rods; instead, actuation displacements are used in this new mechanism system with stiffness being regulated. As a result, the phenomenon that the continuum robot can exhibit an S-shaped curve when subject to single-directional forces is observed and analyzed. Simulations and experiments demonstrated that the presented mechanism has stiffness variation of over 287% and further demonstrated that the mechanism and its model are achievable with good accuracy, such that the ratio of positioning error is less than 2.23% at the robot end-effector to the robot length.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A novel type of compliant and underactuated robotic hand for dexterous grasping
Deimel, R., & Brock, O. (2016) · The International Journal of Robotics Research · doi:10.1177/0278364915592961 · Cited by 1,084
A soft robot that navigates its environment through growth
Hawkes, E. W., Blumenschein, L. H., Greer, J. D., & Okamura, A. M. (2017) · Science Robotics · doi:10.1126/scirobotics.aan3028 · Cited by 968
Cited by
Russo, M., Sadati, S. M. H., Dong, X., Mohammad, A., Walker, I. D., Bergeles, C., Xu, K., & Axinte, D. A. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200367 · Cited by 263
Self-citation
Metadata
- Authors
- Yang, C., Geng, S., Walker, I., Branson, D. T., Liu, J., Dai, J. S., & Kang, R.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 2020-04-13
- Volume
- 39
- Issue
- 14
- Pages
- 1620-1634
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W3017043291
- Cited by
- 217
- References
- 2
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness. https://app.cochat.ai/papers/10.1177/0278364920913929
- The paper
- Yang, C., Geng, S., Walker, I., Branson, D. T., Liu, J., Dai, J. S., & Kang, R. (2020). Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness. The International Journal of Robotics Research. https://doi.org/10.1177/0278364920913929
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.