The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
A review on mechanical behavior of natural fiber reinforced polymer composites and its applications
Abstract
In the last decade, natural plant fibers (jute, sisal, coir, banana, hemp, kenaf, flax, etc.) are getting attention from many researchers and academicians to utilize it as an alternate reinforcement of synthetic fiber reinforced polymer composites. These fibers are becoming a great replacement of conventional fibers (such as glass, carbon, and aramid) due to their light weight, low cost, carbon neutrality, fairly good mechanical properties, high specific strength, and biodegradability characteristics. Some chemical treatments are required to enhance the fiber matrix interfacial strength and to minimize the moisture absorption by these fibers which would ultimately improve physico-mechanical properties of these fiber reinforced composites. This paper is a review on mechanical properties of the natural plant fiber reinforced polymer composites and various factors affecting the mechanical performance of it. The tribological behavior of natural fiber reinforced polymer composites and scanning electron microscope analysis are also discussed. Some mathematical models are mentioned which are useful to predict mechanical behavior of the composites. It is found that Halpin–Tsai equation is the most effective equation amongst others in predicting Young’s modulus for short-fiber reinforced composites with minimum error. The applications of natural plant fiber reinforced polymer composites in various engineering fields are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
The elasticity and strength of paper and other fibrous materials
Cox, H. L. (1952) · British Journal of Applied Physics · doi:10.1088/0508-3443/3/3/302 · Cited by 3,586
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
The Halpin‐Tsai equations: A review
Affdl, J. C. H., & Kardos, J. L. (1976) · Polymer Engineering & Science · doi:10.1002/pen.760160512 · Cited by 3,071
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Progress Report on Natural Fiber Reinforced Composites: Progress Report on Natural Fiber Composites
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 997
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
Stiffness predictions for unidirectional short-fiber composites: Review and evaluation
Tucker, C. L., & Liang, E. W. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(98)00120-1 · Cited by 748
Botelho, E. C., Silva, R. A., Pardini, L. C., & Rezende, M. C. (2006) · Materials Research · doi:10.1590/s1516-14392006000300002 · Cited by 561
Joseph, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00098-2 · Cited by 538
Oil palm fiber (OPF) and its composites: A review
Shinoj, S., Visvanathan, R., Panigrahi, S., & Kochubabu, M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.009 · Cited by 523
Study of moisture absorption in natural fiber plastic composites
WANG, W., Sain, M. M., & COOPER, P. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.027 · Cited by 411
Studies on the properties of natural fibers-reinforced thermoplastic starch composites
Ma, X., Yu, J., & Kennedy, J. F. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.07.015 · Cited by 408
Mechanical properties of pineapple leaf fibre reinforced polypropylene composites
Arib, R. M. N., Sapuan, S. M., Ahmad, M. M. H. M., Paridah, M. T., & Zaman, H. M. D. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.11.009 · Cited by 370
Tribological behavior of natural fiber reinforced PLA composites
Bajpai, P. K., Singh, I., & Madaan, J. (2012) · Wear · doi:10.1016/j.wear.2012.10.019 · Cited by 366
Hu, R., & Lim, J.-K. (2007) · Journal of Composite Materials · doi:10.1177/0021998306069878 · Cited by 334
A review of bast fibres and their composites. Part 2 – Composites
Summerscales, J., Dissanayake, N., Virk, A., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.020 · Cited by 274
Lee, B.-H., Kim, H.-J., & Yu, W.-R. (2009) · Fibers and Polymers · doi:10.1007/s12221-009-0083-z · Cited by 263
Sinha, E., & Panigrahi, S. (2009) · Journal of Composite Materials · doi:10.1177/0021998309338078 · Cited by 211
Polypropylene composites with enzyme modified abaca fibre
Bledzki, A. K., Mamun, A. A., Jaszkiewicz, A., & Erdmann, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.02.003 · Cited by 198
Shah, D. U., Porter, D., & Vollrath, F. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.07.015 · Cited by 189
Natural Fiber Reinforced Foams Based on Renewable Resources for Automotive Interior Applications
Dahlke, B., Larbig, H., Scherzer, H. D., & Poltrock, R. (1998) · Journal of Cellular Plastics · doi:10.1177/0021955x9803400406 · Cited by 179
Mohanty, A. K., Drzal, L. T., & Misra, M. (2002) · Journal of Adhesion Science and Technology · doi:10.1163/156856102760146129 · Cited by 175
Predicting the tensile strength of natural fibre reinforced thermoplastics
Facca, A. G., Kortschot, M. T., & Yan, N. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.018 · Cited by 171
van den Oever, M. J. A., Bos, H. L., & van Kemenade, M. J. J. M. (2000) · Applied Composite Materials · doi:10.1023/a:1026594324947 · Cited by 166
Developments in fiber-reinforced polymer (FRP) composites for civil engineering
Uddin, N. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857098955 · Cited by 162
Gassan, J., & Bledzki, A. K. (1999) · Polymer Composites · doi:10.1002/pc.10383 · Cited by 108
Natural fiber for green technology in automotive industry: A brief review
Ramli, N., Mazlan, N., Ando, Y., Leman, Z., Abdan, K., Aziz, A., & Sairy, N. A. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012012 · Cited by 98
Cited by
Ilyas, R., Aisyah, H., Nordin, A., Ngadi, N., Zuhri, M., Asyraf, M., Sapuan, S., Zainudin, E., Sharma, S., Abral, H., et al. (2022) · Polymers · doi:10.3390/polym14050874 · Cited by 258
Metadata
- Authors
- Jariwala, H., & Jain, P.
- Venue
- Journal of Reinforced Plastics and Composites
- Publisher
- SAGE Publications
- Published
- 2019-02-07
- Volume
- 38
- Issue
- 10
- Pages
- 441-453
- ISSN
- 0731-6844 (ISSN-L)
- 1530-7964
- OpenAlex
- W2913646279
- Cited by
- 258
- References
- 33
- FWCI
- 9.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.