Optimising lubricated friction coefficient by surface texturing
The DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
Surface texturing has proved to be a very useful tool for expanding the behaviour under hydrodynamic and elastohydrodynamic regimes instead of mixed or boundary lubrication regimes, and therefore for reducing the friction coefficient under high-load low-speed conditions. This article presents the texturing of different copper test-samples using photolithography and chemical etching to measure the friction coefficient using a point contact machine. The effects of texture size, texturing density, the initial roughness of the samples and the operating conditions have all been studied. Some combinations of texturing density and texture size achieve up to 30% reduction in the friction coefficient. Taking into account experimental data, artificial neural networks are used as a tool for both predicting and optimising the friction coefficient on the textured surface for any given operating condition.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The perceptron: A probabilistic model for information storage and organization in the brain.
Rosenblatt, F. (1958) · Psychological Review · doi:10.1037/h0042519 · Cited by 12,280
State of the Art in Laser Surface Texturing
Etsion, I. (2005) · Journal of Tribology · doi:10.1115/1.1828070 · Cited by 1,409 · cited 1×
“Laser (LST) NiCrBSi coating Circle Ref.(15,16)”
Wakuda, M., Yamauchi, Y., Kanzaki, S., & Yasuda, Y. (2003) · Wear · doi:10.1016/s0043-1648(03)00004-8 · Cited by 708 · cited 2×
“Depth (d) was measured with a profilometer, resulting in an R/d&2 ratio in most samples, as can be seen in Figure 5, giving a smoother shape than that obtained by other techniques such as Abrasive Jet or Laser technologies.(20) By controlling the time and temperature of the chemical attack different depths can be obta…”
BackgroundMethodKovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., & Etsion, I. (2005) · Tribology International · doi:10.1016/j.triboint.2004.08.004 · Cited by 608 · cited 1×
“By texturing surfaces the existing lubrication regime can be modified in order to reduce wear and friction.(11) The effect of texturing is shown schematically in the Stribeck curve in Figure 1, where an enlarged EHL zone is observed.”
BackgroundA Theory of Lubrication by Microirregularities
Hamilton, D. B., Walowit, J. A., & Allen, C. M. (1966) · Journal of Basic Engineering · doi:10.1115/1.3645799 · Cited by 581
Ueber die Berührung fester elastischer Körper
Hertz, H. (1882) · De Gruyter eBooks · doi:10.1515/9783112342404-004 · Cited by 565
Influence of surface texture on boundary lubricated sliding contacts
Pettersson, U., & Jacobson, S. (2003) · Tribology International · doi:10.1016/s0301-679x(03)00104-x · Cited by 556 · cited 1×
“Photolithography and thermal oxidation Silicon wafers Square Ref.(17)”
Improving Tribological Performance of Piston Rings by Partial Surface Texturing
Kligerman, Y., Etsion, I., & Shinkarenko, A. (2005) · Journal of Tribology · doi:10.1115/1.1866171 · Cited by 361 · cited 1×
“Work has also been conducted on the development of optimum engineering surfaces by using micro-topographies or surface textures.(9,10) By texturing surfaces the existing lubrication regime can be modified in order to reduce wear and friction.”
BackgroundYu, H., Wang, X., & Zhou, F. (2010) · Tribology Letters · doi:10.1007/s11249-009-9497-4 · Cited by 355 · cited 1×
“Micro-electrolytic etching Steel Circle Ref.(21)”
Principles of neurodynamics: Yu. G. Antomonov
Ivakhnenko, A. G. (1976) · Cybernetics · doi:10.1007/bf01071380 · Cited by 318
Research works printed but not linked: 6
- Salaberry PC, 2010, Vehicle with drag-reducing outer surface
- European Cooperation in the Field of Scientific and Technical Research, 2008, COST Action 532. Scientific final report: Triboscience and tribotechnology. Superior friction and wear control in engines and transmissions
- Anno JN, 1969, J Basic Eng, 91, 726
- Kortikar SN, Stephens LS, Hadinata PC, et al. Manufacturing of microasperities on thrust surfaces using ultraviolet photolithography. In: Proceedings of the ASPE winter topical meeting , Raleigh, NC, USA, 2003, vol.28, pp.148–153.
- McCulloch WS, 1943, Bull Math Biol, 5, 115
- Rosenblatt F, 1961, Principles of neurodynamics
Cited by
Numerical micro-texture optimization for lubricated contacts—A critical discussion
Marian, M., Almqvist, A., Rosenkranz, A., & Fillon, M. (2022) · Friction · doi:10.1007/s40544-022-0609-6 · Cited by 160
Physics-Informed Machine Learning—An Emerging Trend in Tribology
Marian, M., & Tremmel, S. (2023) · Lubricants · doi:10.3390/lubricants11110463 · Cited by 88
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
“Otero et al. [66] trained an ANN with 20 neurons in a single hidden layer to predict the coefficient of friction in micro-textured EHL contacts under various operating conditions and dependent on the textures’ dimensions and patterns.”
MethodBhardwaj, V., Pandey, R. K., & Agarwal, V. K. (2016) · Tribology International · doi:10.1016/j.triboint.2016.12.028 · Cited by 59
Zhang, Y., Zhang, X. G., & Matsoukas, G. (2015) · Biosurface and Biotribology · doi:10.1016/j.bsbt.2015.11.003 · Cited by 42
Metadata
- Authors
- de la Guerra Ochoa, E., Otero, J. E., Tanarro, E. C., Morgado, P. L., Lantada, A. D., Munoz-Guijosa, J., & Sanz, J. M.
- Affiliations
- Grupo de Investigación en Ingeniería de Máquinas, Universidad Politécnica de Madrid, Madrid, Spain
- Universidad Politécnica de Madrid (ES)
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Publisher
- SAGE Publications
- Published
- 2013-02-04
- Volume
- 227
- Issue
- 11
- Pages
- 2610-2619
- ISSN
- 0263-7154 (ISSN-L)
- 0954-4062
- 2041-2983
- OpenAlex
- W2149657973
- Cited by
- 25
- References
- 31
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 2 · 2023: 3 · 2022: 4 · 2021: 1 · 2020: 2 · 2019: 1 · 2018: 1 · 2017: 2 · 2016: 3 · 2015: 1 · 2014: 1
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Keywords
- surface texturing, friction coefficient reduction, elastohydrodynamic lubrication, hydrodynamic lubrication, copper surfaces, photolithography, chemical etching, surface roughness, artificial neural networks, friction prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimising lubricated friction coefficient by surface texturing. https://app.cochat.ai/papers/10.1177/0954406213476402
- The paper
- de la Guerra Ochoa, E., Otero, J. E., Tanarro, E. C., Morgado, P. L., Lantada, A. D., Munoz-Guijosa, J., & Sanz, J. M. (2013). Optimising lubricated friction coefficient by surface texturing. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. https://doi.org/10.1177/0954406213476402
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.