The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Metamaterial-based Broadband Elastic Wave Absorber
Abstract
This article presents modeling and analysis techniques for and reveals the actual working mechanism of longitudinal metamaterial bars as elastic wave absorbers. A metamaterial-based elastic wave absorber can be a uniform isotropic bar with many tiny spring-mass subsystems attached at separated longitudinal locations. In the literature, each cell that consists of a bar segment and an attached spring-mass subsystem is modeled as a discrete system of two degrees of freedom by integration and/or finite difference, and the idealized model becomes a dispersive medium for elastic waves and has a stop band that allows no waves to propagate forward. This work shows that these idealized models can be used only for elastic waves having wavelengths much longer than the unit cell’s length. Moreover, it is revealed that a metamaterial-based elastic wave absorber is actually based on the concept of conventional mechanical vibration absorbers, which uses the local resonance of subsystems to generate inertia forces to work against the external load and prevent elastic waves from propagating forward. This concept is extended to design a broadband absorber that works for elastic waves of any wavelengths, including waves having wavelengths shorter than the unit cell’s length. Numerical examples validate the design and reveal the cause of stop band. Moreover, the effect of negative effective mass and acoustic and optical modes are explained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Negative Refraction Makes a Perfect Lens
Pendry, J. B. (2000) · Physical Review Letters · doi:10.1103/physrevlett.85.3966 · Cited by 12,159
Cited by
Vibration control based metamaterials and origami structures: A state-of-the-art review
Ji, J. C., Luo, Q., & Ye, K. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107945 · Cited by 386
Acoustic metamaterial beams based on multi-frequency vibration absorbers
Pai, P. F., Peng, H., & Jiang, S. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.12.013 · Cited by 302
Self-citationApplications of Nonlinearity in Passive Vibration Control: A Review
Balaji, P. S., & Karthik SelvaKumar, K. (2021) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-020-00216-3 · Cited by 265
Acoustic metamaterial plates for elastic wave absorption and structural vibration suppression
Peng, H., & Frank Pai, P. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2014.09.018 · Cited by 261
A Review of Acoustic Metamaterials and Phononic Crystals
Liu, J., Guo, H., & Wang, T. (2020) · Crystals · doi:10.3390/cryst10040305 · Cited by 261
“Peng, H.; Pai, P. Acoustic metamaterial plates for elastic wave absorption and structural vibration suppression.”
BackgroundInfluential
Metadata
- Authors
- Pai, P. F.
- Venue
- Journal of Intelligent Material Systems and Structures
- Publisher
- SAGE Publications
- Published
- 2010-01-12
- Volume
- 21
- Issue
- 5
- Pages
- 517-528
- ISSN
- 1045-389X (ISSN-L)
- 1530-8138
- OpenAlex
- W2171038436
- Cited by
- 190
- References
- 1
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metamaterial-based Broadband Elastic Wave Absorber. https://app.cochat.ai/papers/10.1177/1045389x09359436
- The paper
- Pai, P. F. (2010). Metamaterial-based Broadband Elastic Wave Absorber. Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389x09359436
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.