Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 213

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Theory of Metamaterial Beams for Broadband Vibration Absorption

Sun, Hongwei, Du, Xingwen, Pai, P.Frank·2010·Journal of Intelligent Material Systems and Structures

Abstract

This article presents methods for modeling, analysis, and design of metamaterial beams for broadband vibration absorption/isolation. The proposed metamaterial beam consists of a uniform isotropic beam with many small spring-mass-damper subsystems integrated at separated locations along the beam to act as vibration absorbers. For a unit cell of an infinite metamaterial beam, governing equations are derived using the extended Hamilton principle. The existence of stopband is demonstrated using a model based on averaging material properties over a cell length and a model based on finite element modeling and the Bloch-Floquet theory for periodic structures. However, these two idealized models cannot be used for finite beams and/or elastic waves having short wavelengths. For finite metamaterial beams, a linear finite element method is used for detailed modeling and analysis. Both translational and rotational absorbers are considered. Because results show that rotational absorbers are not efficient, only translational absorbers are recommended for practical designs. The concepts of negative effective mass and stiffness and how the spring-mass-damper subsystems create a stopband (i.e., no elastic waves in this frequency range can propagate forward) are explained in detail. Numerical simulations reveal that the actual working mechanism of the proposed metamaterial beam is based on the concept of conventional mechanical vibration absorbers. It uses the incoming elastic wave in the beam to resonate the integrated spring-mass-damper absorbers to vibrate in their optical mode at frequencies close to but above their local resonance frequencies to create shear forces and bending moments to straighten the beam and stop the wave propagation. This concept can be easily extended to design a broadband absorber that works for elastic waves of short and long wavelengths. Numerical examples validate the concept and show that, for high-frequency waves, the structure’s boundary conditions do not have significant influence on the absorbers’ function. However, for absorption of low-frequency waves, the boundary conditions and resonant modes of the structure need to be considered in the design. With appropriate design calculations, finite discrete spring-mass-damper absorbers can be used, and hence expensive micro- or nanomanufacturing techniques are not needed for design and manufacturing of such metamaterial beams for broadband vibration absorption/isolation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1177/1045389x10375637

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

See all 213

Metadata

Authors
Sun, H., Du, X., & Pai, P. F.
Venue
Journal of Intelligent Material Systems and Structures
Published
2010-06-09
Volume
21
Issue
11
Pages
1085-1101
ISSN
  • 1045-389X (ISSN-L)
  • 1530-8138
OpenAlex
W1999141328
Cited by
213
References
2
FWCI
1.27
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Theory of Metamaterial Beams for Broadband Vibration Absorption. https://app.cochat.ai/papers/10.1177/1045389x10375637
The paper
Sun, H., Du, X., & Pai, P. F. (2010). Theory of Metamaterial Beams for Broadband Vibration Absorption. Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389x10375637

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.